Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) client-ip=2620:137:e000::3:3;
Received-SPF: Fail (protection.outlook.com: domain of wiwynn.com does not
 designate 211.20.1.79 as permitted sender) receiver=protection.outlook.com;
 client-ip=211.20.1.79; helo=localhost.localdomain;
From:   Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To:     patrick@stwcx.xyz, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Joel Stanley <joel@jms.id.au>,
        Andrew Jeffery <andrew@codeconstruct.com.au>
Cc:     Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 08/14] ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change
Date:   Mon, 11 Dec 2023 10:49:39 +0800
Message-Id: <20231211024947.3990898-9-Delphine_CC_Chiu@wiwynn.com>
In-Reply-To: <20231211024947.3990898-1-Delphine_CC_Chiu@wiwynn.com>
References: <20231211024947.3990898-1-Delphine_CC_Chiu@wiwynn.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 11 Dec 2023 02:50:21.1557
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 92527421-4df7-4567-bd7b-08dbf9f3eb00
X-MS-Exchange-CrossTenant-Id: da6e0628-fc83-4caf-9dd2-73061cbab167
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=da6e0628-fc83-4caf-9dd2-73061cbab167;Ip=[211.20.1.79];Helo=[localhost.localdomain]
X-MS-Exchange-CrossTenant-AuthSource: SG1PEPF000082E6.apcprd02.prod.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: TYZPR04MB7507
X-Spam-Status: No, score=-0.9 required=5.0 tests=DKIM_SIGNED,DKIM_VALID,
	DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,
	SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE,WEIRD_QUOTING
	autolearn=unavailable autolearn_force=no version=3.4.6
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lipwig.vger.email
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
X-Greylist: Sender passed SPF test, not delayed by milter-greylist-4.6.4 (lipwig.vger.email [0.0.0.0]); Sun, 10 Dec 2023 18:51:02 -0800 (PST)

Revise i2c11 and i2c12 schematic change:
- remove space for adm1272 compatible
- enable interrupt setting for pca9555
- add eeprom for yosemite4 medusa board/BSM use
- remove temperature sensor for yosemite4 schematic change
- add power sensor for power module reading

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 118 ++++++++++++++----
 1 file changed, 93 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index da413325ce30..ccb5ecd8d9a6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -821,41 +821,94 @@ imux29: i2c@1 {
 &i2c11 {
 	status = "okay";
 	power-sensor@10 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
 	power-sensor@12 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x12>;
 	};
 
-	gpio@20 {
+	gpio_ext1: pca9555@20 {
 		compatible = "nxp,pca9555";
-		reg = <0x20>;
+		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
-	};
-
-	gpio@21 {
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+		"P48V_OCP_GPIO1","P48V_OCP_GPIO2",
+		"P48V_OCP_GPIO3","FAN_BOARD_0_REVISION_0_R",
+		"FAN_BOARD_0_REVISION_1_R","FAN_BOARD_1_REVISION_0_R",
+		"FAN_BOARD_1_REVISION_1_R","RST_MUX_R_N",
+		"RST_LED_CONTROL_FAN_BOARD_0_N","RST_LED_CONTROL_FAN_BOARD_1_N",
+		"RST_IOEXP_FAN_BOARD_0_N","RST_IOEXP_FAN_BOARD_1_N",
+		"PWRGD_LOAD_SWITCH_FAN_BOARD_0_R","PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+		"","";
+	};
+
+	gpio_ext2: pca9555@21 {
 		compatible = "nxp,pca9555";
-		reg = <0x21>;
+		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
-	};
-
-	gpio@22 {
+		reg = <0x21>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+		"DELTA_MODULE_TYPE","VSENSE_ERR_VDROP_R",
+		"EN_P48V_AUX_0","EN_P48V_AUX_1",
+		"MEDUSA_BOARD_REV_0","MEDUSA_BOARD_REV_1",
+		"MEDUSA_BOARD_REV_2","MEDUSA_BOARD_TYPE",
+		"HSC_OCP_SLOT_ODD_GPIO1","HSC_OCP_SLOT_ODD_GPIO2",
+		"HSC_OCP_SLOT_ODD_GPIO3","HSC_OCP_SLOT_EVEN_GPIO1",
+		"HSC_OCP_SLOT_EVEN_GPIO2","HSC_OCP_SLOT_EVEN_GPIO3",
+		"ADC_TYPE_0_R","ADC_TYPE_1_R";
+	};
+
+	gpio_ext3: pca9555@22 {
 		compatible = "nxp,pca9555";
-		reg = <0x22>;
+		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
-	};
-
-	gpio@23 {
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+		"CARD_TYPE_SLOT1","CARD_TYPE_SLOT2",
+		"CARD_TYPE_SLOT3","CARD_TYPE_SLOT4",
+		"CARD_TYPE_SLOT5","CARD_TYPE_SLOT6",
+		"CARD_TYPE_SLOT7","CARD_TYPE_SLOT8",
+		"OC_P48V_HSC_0_N","FLT_P48V_HSC_0_N",
+		"PWRGD_P12V_AUX_1","OC_P48V_HSC_1_N",
+		"FLT_P48V_HSC_1_N","PWRGD_P12V_AUX_1",
+		"MEDUSA_ADC_EFUSE_TYPE_R","P12V_HSC_TYPE";
+	};
+
+	gpio_ext4: pca9555@23 {
 		compatible = "nxp,pca9555";
-		reg = <0x23>;
+		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
+		reg = <0x23>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+		"HSC1_ALERT1_R_N","HSC2_ALERT1_R_N",
+		"HSC3_ALERT1_R_N","HSC4_ALERT1_R_N",
+		"HSC5_ALERT1_R_N","HSC6_ALERT1_R_N",
+		"HSC7_ALERT1_R_N","HSC8_ALERT1_R_N",
+		"HSC1_ALERT2_R_N","HSC2_ALERT2_R_N",
+		"HSC3_ALERT2_R_N","HSC4_ALERT2_R_N",
+		"HSC5_ALERT2_R_N","HSC6_ALERT2_R_N",
+		"HSC7_ALERT2_R_N","HSC8_ALERT2_R_N";
+	};
+
+	power-sensor@40 {
+			compatible = "mps,mp5023";
+			reg = <0x40>;
 	};
 
 	temperature-sensor@48 {
@@ -868,19 +921,29 @@ temperature-sensor@49 {
 		reg = <0x49>;
 	};
 
-	temperature-sensor@4a {
-		compatible = "ti,tmp75";
-		reg = <0x4a>;
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
 	};
 
-	temperature-sensor@4b {
-		compatible = "ti,tmp75";
-		reg = <0x4b>;
+	power-sensor@62 {
+		compatible = "pmbus";
+		reg = <0x62>;
 	};
 
-	eeprom@54 {
-		compatible = "atmel,24c256";
-		reg = <0x54>;
+	power-sensor@64 {
+		compatible = "pmbus";
+		reg = <0x64>;
+	};
+
+	power-sensor@65 {
+		compatible = "pmbus";
+		reg = <0x65>;
+	};
+
+	power-sensor@68 {
+		compatible = "pmbus";
+		reg = <0x68>;
 	};
 };
 
@@ -898,6 +961,11 @@ eeprom@50 {
 		reg = <0x50>;
 	};
 
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+
 	rtc@6f {
 		compatible = "nuvoton,nct3018y";
 		reg = <0x6f>;
-- 
2.25.1