Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:3 as permitted sender) client-ip=2620:137:e000::3:3;
Date:   Mon, 11 Dec 2023 18:46:40 -0800
From:   Jakub Kicinski <kuba@kernel.org>
To:     Christian Marangi <ansuelsmth@gmail.com>
Cc:     Florian Fainelli <florian.fainelli@broadcom.com>,
        Broadcom internal kernel review list 
        <bcm-kernel-feedback-list@broadcom.com>,
        Andrew Lunn <andrew@lunn.ch>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Paolo Abeni <pabeni@redhat.com>,
        David Epping <david.epping@missinglinkelectronics.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        Harini Katakam <harini.katakam@amd.com>,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [net-next PATCH v4 3/3] net: phy: add support for PHY package
 MMD read/write
Message-ID: <20231211184640.5faa296c@kernel.org>
In-Reply-To: <20231206232547.2501-3-ansuelsmth@gmail.com>
References: <20231206232547.2501-1-ansuelsmth@gmail.com>
        <20231206232547.2501-3-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

Some nit picks since nobody has acked :(

On Thu,  7 Dec 2023 00:25:47 +0100 Christian Marangi wrote:
> +/**
> + * __phy_package_read_mmd - Convenience function for reading a register
> + * on an MMD on a given PHY using the PHY package base addr, added of

s/on an MMD/of an MMD/ ?
s/added of/added to/ ?

> + * the addr_offset value.
> + * @phydev: The phy_device struct
> + * @addr_offset: The offset to be added to PHY package base_addr
> + * @devad: The MMD to read from
> + * @regnum: The register on the MMD to read
> + *
> + * Same rules as for __phy_read();
> + *
> + * NOTE: It's assumed that the entire PHY package is either C22 or C45.

I'd try to make the headline shorter:

/**
 * __phy_package_read_mmd - read MMD reg relative to PHY package base addr
 * @phydev: The phy_device struct
 * @addr_offset: The offset to be added to PHY package base_addr
 * @devad: The MMD to read from
 * @regnum: The register on the MMD to read
 *
 * Convenience helper for reading a register of an MMD on a given PHY
 * using the PHY package base address. The base address is added to
 * the addr_offset value.
 *
 * Same calling rules as for __phy_read();
 *
 * NOTE: It's assumed that the entire PHY package is either C22 or C45.
 */