Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 27 Dec 2001 16:52:23 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 27 Dec 2001 16:52:10 -0500 Received: from [217.7.64.198] ([217.7.64.198]:51617 "EHLO mx1.net4u.de") by vger.kernel.org with ESMTP id ; Thu, 27 Dec 2001 16:51:44 -0500 Message-Id: <200112272151.fBRLpe415377@mx1.net4u.de> Content-Type: text/plain; charset=US-ASCII From: Ernst Herzberg Reply-To: earny@net4u.de To: linux-kernel@vger.kernel.org Subject: 2.4.17 with acpi on a Laptop Date: Thu, 27 Dec 2001 22:51:39 +0100 X-Mailer: KMail [version 1.3.1] MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, i've got a Gericom m6-t Laptop, and i try to install Linux on it (suse-7.3). With kernel 2.4.16 every works fine, but the internal tulip-adaper and sound. Analyses shows, that there are something going wrong with the irq-routing tables. I tried to install the acpi.sf.net on this kernel, but that does'n work. With 2.4.17 i can see the first time /proc/acpi, but the laptop will overheat after about 10 minutes. PCMCIA is also not working, if there is a card sticking in a slot, the PC will die without any errormessage (Starting kernel PCMCIA (using scheme: SuSE)). Any idea? The Laptop has in the moment a direct internet-connecton with a fixed ip-address (with 2.4.16 and 2.4.10 over a PCMCIA-Card). Pls help :-) Thanks, Earny ##### dmesg 2.4.17 Linux version 2.4.17 (root@lacpi) (gcc version 2.95.3 20010315 (SuSE)) #4 Thu Dec 27 20:34:20 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data) BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 0000000020000000 (usable) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) On node 0 totalpages: 131072 zone(0): 4096 pages. zone(1): 126976 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz enableapic vga=794 hdc=ide-scsi acpi=on acpi_boot=on ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1199.823 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 2392.06 BogoMIPS Memory: 512764k/524288k available (1454k kernel code, 11072k reserved, 443k data, 108k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) III CPU 1200MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd82e, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI: Found IRQ 4 for device 00:07.5 IRQ routing conflict for 00:0c.1, have irq 10, want irq 4 PCI: Via IRQ fixup for 00:07.5, from 255 to 4 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized tbxface-0099 [01] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:................................................................................................... 99 Control Methods found and parsed (350 nodes total) ACPI Namespace successfully loaded at root c030ad80 ACPI: Core Subsystem version [20011018] evxfevnt-0081 [02] Acpi_enable : Transition to ACPI mode successful Executing device _INI methods:...[ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_STA [ACPI Debug] String: __________________________________ ................................... 38 Devices found: 38 _STA, 2 _INI Completing Region and Field initialization:.................. 8/13 Regions, 10/11 Fields initialized (350 nodes total) ACPI: Subsystem enabled [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_STA [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_STA [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_STA [ACPI Debug] String: __________________________________ Power Resource: found ACPI: System firmware supports S0 S1 S4 S5 Processor[0]: C0 C1 C2, 8 throttling states [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_STA [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_STA [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_BIF [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_BIF_RETURN: [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] Package: Elements - 0xC1878608 [ACPI Debug] Str[ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_BIF [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: BAT0_BIF_RETURN: [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] Package: Elements - 0xC1878608 [ACPI Debug] String: __________________________________ ACPI: Battery socket found, battery present ACPI: AC Adapter found ACPI: Power Button (FF) found ACPI: Multiple power buttons detected, ignoring fixed-feature ACPI: Power Button (CM) found ACPI: Lid Switch (CM) found [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: THRM_TMP [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: THRM_TMP [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: THRM_TMP [ACPI Debug] String: __________________________________ [ACPI Debug] String: __________________________________ [ACPI Debug] String: [ACPI Debug] String: THRM_TMP [ACPI Debug] String: __________________________________ ACPI: Thermal Zone found vesafb: framebuffer at 0xf0000000, mapped to 0xe0814000, size 32768k vesafb: mode is 1280x1024x16, linelength=2560, pages=11 vesafb: protected mode interface info at c000:51a4 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHN2300AT, ATA DISK drive hdc: UJDA710, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(100) ide-floppy driver 0.97.sv Partition check: hda: hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.97.sv SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 131072 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 571k freed VFS: Mounted root (ext2 filesystem). scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MATSHITA Model: UJDA710 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MATSHITA Model: UJDA710 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MATSHITA Model: UJDA710 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MATSHITA Model: UJDA710 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MATSHITA Model: UJDA710 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MATSHITA Model: UJDA710 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MATSHITA Model: UJDA710 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1 Attached scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2 Attached scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3 Attached scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4 Attached scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5 Attached scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray sr2: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray sr3: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray sr4: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray sr5: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray sr6: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray FAT: bogus logical sector size 0 FAT: bogus logical sector size 0 reiserfs: checking transaction log (device 03:03) ... Warning, log replay starting on readonly filesystem reiserfs: replayed 3 transactions in 4 seconds Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. change_root: old root has d_count=2 Trying to unmount old root ... okay Freeing unused kernel memory: 108k freed Adding Swap: 1052248k swap-space (priority 42) ip_tables: (c)2000 Netfilter core team ip_conntrack (4096 buckets, 32768 max) usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Assigned IRQ 5 for device 00:07.2 uhci.c: USB UHCI at I/O 0x1020, IRQ 5 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Assigned IRQ 10 for device 00:0c.0 PCI: Sharing IRQ 10 with 00:06.0 PCI: Sharing IRQ 10 with 00:0d.0 PCI: Found IRQ 4 for device 00:0c.1 PCI: Sharing IRQ 4 with 00:07.5 IRQ routing conflict for 00:0c.1, have irq 10, want irq 4 Yenta IRQ list 0800, PCI irq10 Socket status: 30000006 Yenta IRQ list 0800, PCI irq10 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. ##### lspci -vvx 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 91 06 06 00 10 a2 c4 00 00 06 00 00 00 00 10: 08 00 00 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 98 85 07 00 30 22 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 90 90 00 00 20: 10 e0 10 e0 00 f0 f0 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00 00:06.0 Communication controller: Lucent Microelectronics LT WinModem Subsystem: Askey Computer Corp.: Unknown device 4005 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 13 11 16 12 00 00 90 02 11 00 00 02 00 00 00 00 10: 01 1c 00 00 00 00 00 20 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 13 11 42 22 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 01 ff ff 00:0c.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01) Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1860 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00: 17 12 33 69 87 00 10 04 01 00 07 06 00 a8 82 00 10: 00 10 00 20 a0 00 00 02 00 02 05 b0 00 00 40 20 20: 00 f0 7f 20 00 00 80 20 00 f0 bf 20 01 40 00 00 30: fd 40 00 00 01 44 00 00 fd 44 00 00 0a 01 80 05 40: 09 15 60 18 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0c.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01) Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1860 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00: 17 12 33 69 87 00 10 04 01 00 07 06 00 a8 82 00 10: 00 20 00 20 a0 00 00 02 00 06 09 b0 00 00 c0 20 20: 00 f0 ff 20 00 00 00 21 00 f0 3f 21 01 48 00 00 30: fd 48 00 00 01 4c 00 00 fd 4c 00 00 0a 02 80 05 40: 09 15 60 18 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0d.0 FireWire (IEEE 1394): Lucent Microelectronics: Unknown device 5811 (rev 04) (prog-if 10 [OHCI]) Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1881 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA+ AGP- 64bit- FW- Rate= Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 59 4c 83 02 b0 02 00 00 00 03 08 42 00 00 10: 08 00 00 f0 01 90 00 00 00 00 10 e0 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 09 15 30 19 30: 00 00 00 00 58 00 00 00 00 00 00 00 05 01 08 00 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/