Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) client-ip=23.128.96.38;
Message-ID: <c21ace70-12c0-4fdc-9316-341876b871a6@linaro.org>
Date:   Wed, 13 Dec 2023 17:46:01 +0100
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v2 3/4] arm64: dts: qcom: sm8550: move Soundwire pinctrl
 to its nodes
Content-Language: en-GB
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20231213162856.188566-1-krzysztof.kozlowski@linaro.org>
 <20231213162856.188566-4-krzysztof.kozlowski@linaro.org>
From:   Neil Armstrong <neil.armstrong@linaro.org>
In-Reply-To: <20231213162856.188566-4-krzysztof.kozlowski@linaro.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk

Le 13/12/2023 à 17:28, Krzysztof Kozlowski a écrit :
> Pin configuration for Soundwire bus should be set in Soundwire
> controller nodes, not in the associated macro codec node.  This
> placement change should not have big impact in general, because macro
> codec is a clock provider for Soundwire controller, thus its devices is
> probed first.  However it will have impact for disabled Soundwire buses,
> e.g. WSA2, because after this change the pins will be left in default
> state.
> 
> We also follow similar approach in newer SoCs, like Qualcomm SM8650.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8550.dtsi | 20 ++++++++++++--------
>   1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 1f06fd33d1ce..d8f79b5895f5 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -2050,8 +2050,6 @@ lpass_wsa2macro: codec@6aa0000 {
>   
>   			#clock-cells = <0>;
>   			clock-output-names = "wsa2-mclk";
> -			pinctrl-names = "default";
> -			pinctrl-0 = <&wsa2_swr_active>;
>   			#sound-dai-cells = <1>;
>   		};
>   
> @@ -2063,6 +2061,9 @@ swr3: soundwire-controller@6ab0000 {
>   			clock-names = "iface";
>   			label = "WSA2";
>   
> +			pinctrl-0 = <&wsa2_swr_active>;
> +			pinctrl-names = "default";
> +
>   			qcom,din-ports = <4>;
>   			qcom,dout-ports = <9>;
>   
> @@ -2096,8 +2097,6 @@ lpass_rxmacro: codec@6ac0000 {
>   
>   			#clock-cells = <0>;
>   			clock-output-names = "mclk";
> -			pinctrl-names = "default";
> -			pinctrl-0 = <&rx_swr_active>;
>   			#sound-dai-cells = <1>;
>   		};
>   
> @@ -2109,6 +2108,9 @@ swr1: soundwire-controller@6ad0000 {
>   			clock-names = "iface";
>   			label = "RX";
>   
> +			pinctrl-0 = <&rx_swr_active>;
> +			pinctrl-names = "default";
> +
>   			qcom,din-ports = <1>;
>   			qcom,dout-ports = <11>;
>   
> @@ -2142,8 +2144,6 @@ lpass_txmacro: codec@6ae0000 {
>   
>   			#clock-cells = <0>;
>   			clock-output-names = "mclk";
> -			pinctrl-names = "default";
> -			pinctrl-0 = <&tx_swr_active>;
>   			#sound-dai-cells = <1>;
>   		};
>   
> @@ -2161,8 +2161,6 @@ lpass_wsamacro: codec@6b00000 {
>   
>   			#clock-cells = <0>;
>   			clock-output-names = "mclk";
> -			pinctrl-names = "default";
> -			pinctrl-0 = <&wsa_swr_active>;
>   			#sound-dai-cells = <1>;
>   		};
>   
> @@ -2174,6 +2172,9 @@ swr0: soundwire-controller@6b10000 {
>   			clock-names = "iface";
>   			label = "WSA";
>   
> +			pinctrl-0 = <&wsa_swr_active>;
> +			pinctrl-names = "default";
> +
>   			qcom,din-ports = <4>;
>   			qcom,dout-ports = <9>;
>   
> @@ -2203,6 +2204,9 @@ swr2: soundwire-controller@6d30000 {
>   			clock-names = "iface";
>   			label = "TX";
>   
> +			pinctrl-0 = <&tx_swr_active>;
> +			pinctrl-names = "default";
> +
>   			qcom,din-ports = <4>;
>   			qcom,dout-ports = <0>;
>   			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>