Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:7 as permitted sender) client-ip=2620:137:e000::3:7;
From:   Alex Bee <knaerzche@gmail.com>
To:     Sandy Huang <hjc@rock-chips.com>,
        =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>,
        Andy Yan <andyshrk@163.com>, Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
        Maxime Ripard <mripard@kernel.org>,
        Thomas Zimmermann <tzimmermann@suse.de>
Cc:     David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
        Alex Bee <knaerzche@gmail.com>
Subject: [PATCH 11/11] ARM: dts: rockchip: Enable HDMI output for XPI-3128
Date:   Wed, 13 Dec 2023 20:51:25 +0100
Message-ID: <20231213195125.212923-12-knaerzche@gmail.com>
In-Reply-To: <20231213195125.212923-1-knaerzche@gmail.com>
References: <20231213195125.212923-1-knaerzche@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add an hdmi-connector node and enable the hdmi, display-subsystem and vop
nodes.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
 .../arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 03a97881519a..21c1678f4e91 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -47,6 +47,17 @@ dc_5v: dc-5v-regulator {
 		regulator-boot-on;
 	};
 
+	hdmi-connnector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
+
 	/*
 	 * This is a vbus-supply, which also supplies the GL852G usb hub,
 	 * thus has to be always-on
@@ -239,6 +250,10 @@ &cpu0 {
 	cpu-supply = <&vdd_arm>;
 };
 
+&display_subsystem {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	vmmc-supply = <&vcc_io>;
@@ -328,6 +343,16 @@ &gpu {
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_connector_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &mdio {
 	phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -423,3 +448,7 @@ &usb2phy_host {
 &usb2phy_otg {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
-- 
2.43.0