Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.38 as permitted sender) client-ip=23.128.96.38;
From:   George Stark <gnstark@salutedevices.com>
To:     <andy.shevchenko@gmail.com>, <pavel@ucw.cz>, <lee@kernel.org>,
        <vadimp@nvidia.com>, <mpe@ellerman.id.au>, <npiggin@gmail.com>,
        <christophe.leroy@csgroup.eu>, <hdegoede@redhat.com>,
        <mazziesaccount@gmail.com>, <peterz@infradead.org>,
        <mingo@redhat.com>, <will@kernel.org>, <longman@redhat.com>,
        <boqun.feng@gmail.com>, <nikitos.tr@gmail.com>
CC:     <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linuxppc-dev@lists.ozlabs.org>, <kernel@salutedevices.com>,
        George Stark <gnstark@salutedevices.com>
Subject: [PATCH v3 05/11] leds: aw200xx: use devm API to cleanup module's resources
Date:   Thu, 14 Dec 2023 11:29:34 +0300
Message-ID: <20231214082940.2718303-1-gnstark@salutedevices.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().

Signed-off-by: George Stark <gnstark@salutedevices.com>
---
 drivers/leds/leds-aw200xx.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/leds/leds-aw200xx.c b/drivers/leds/leds-aw200xx.c
index 1d3943f86f7f..eed1e65c1c0e 100644
--- a/drivers/leds/leds-aw200xx.c
+++ b/drivers/leds/leds-aw200xx.c
@@ -10,6 +10,7 @@
 #include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/container_of.h>
+#include <linux/devm-helpers.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
@@ -530,6 +531,16 @@ static const struct regmap_config aw200xx_regmap_config = {
 	.disable_locking = true,
 };
 
+static void aw200xx_chip_reset_action(void *data)
+{
+	aw200xx_chip_reset(data);
+}
+
+static void aw200xx_disable_action(void *data)
+{
+	aw200xx_disable(data);
+}
+
 static int aw200xx_probe(struct i2c_client *client)
 {
 	const struct aw200xx_chipdef *cdef;
@@ -568,11 +579,17 @@ static int aw200xx_probe(struct i2c_client *client)
 
 	aw200xx_enable(chip);
 
+	ret = devm_add_action(&client->dev, aw200xx_disable_action, chip);
+	if (ret)
+		return ret;
+
 	ret = aw200xx_chip_check(chip);
 	if (ret)
 		return ret;
 
-	mutex_init(&chip->mutex);
+	ret = devm_mutex_init(&client->dev, &chip->mutex);
+	if (ret)
+		return ret;
 
 	/* Need a lock now since after call aw200xx_probe_fw, sysfs nodes created */
 	mutex_lock(&chip->mutex);
@@ -581,6 +598,10 @@ static int aw200xx_probe(struct i2c_client *client)
 	if (ret)
 		goto out_unlock;
 
+	ret = devm_add_action(&client->dev, aw200xx_chip_reset_action, chip);
+	if (ret)
+		goto out_unlock;
+
 	ret = aw200xx_probe_fw(&client->dev, chip);
 	if (ret)
 		goto out_unlock;
@@ -595,15 +616,6 @@ static int aw200xx_probe(struct i2c_client *client)
 	return ret;
 }
 
-static void aw200xx_remove(struct i2c_client *client)
-{
-	struct aw200xx *chip = i2c_get_clientdata(client);
-
-	aw200xx_chip_reset(chip);
-	aw200xx_disable(chip);
-	mutex_destroy(&chip->mutex);
-}
-
 static const struct aw200xx_chipdef aw20036_cdef = {
 	.channels = 36,
 	.display_size_rows_max = 3,
@@ -652,7 +664,6 @@ static struct i2c_driver aw200xx_driver = {
 		.of_match_table = aw200xx_match_table,
 	},
 	.probe_new = aw200xx_probe,
-	.remove = aw200xx_remove,
 	.id_table = aw200xx_id,
 };
 module_i2c_driver(aw200xx_driver);
-- 
2.25.1