Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.35 as permitted sender) client-ip=23.128.96.35;
From:   Tudor Ambarus <tudor.ambarus@linaro.org>
To:     peter.griffin@linaro.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, mturquette@baylibre.com,
        sboyd@kernel.org, conor+dt@kernel.org, andi.shyti@kernel.org,
        alim.akhtar@samsung.com, gregkh@linuxfoundation.org,
        jirislaby@kernel.org, catalin.marinas@arm.com, will@kernel.org,
        s.nawrocki@samsung.com, tomasz.figa@gmail.com,
        cw00.choi@samsung.com, arnd@arndb.de, semen.protsenko@linaro.org
Cc:     andre.draszik@linaro.org, saravanak@google.com,
        willmcvicker@google.com, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org,
        Tudor Ambarus <tudor.ambarus@linaro.org>
Subject: [PATCH 00/13] GS101 Oriole: CMU_PERIC0 support and USI updates
Date:   Thu, 14 Dec 2023 10:52:30 +0000
Message-ID: <20231214105243.3707730-1-tudor.ambarus@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add support for PERIC0 clocks. Use them for USI in serial and I2C
configurations. Tested the serial at different baudrates (115200,
1M, 3M) and the I2C with an at24 eeprom, all went fine.

Apart of the DT and defconfig changes, the patch set spans through the tty
and clk subsystems. The expectation is that Krzysztof will apply the whole
series through the Samsung SoC tree. If the tty and clk subsystem
maintainers can give an acked-by or reviewed-by on the relevant patches
that would be most appreciated!

Thanks!
ta

Tudor Ambarus (13):
  dt-bindings: clock: google,gs101: fix CMU_TOP gate clock names
  dt-bindings: clock: google,gs101-clock: add PERIC0 clock management
    unit
  dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
  dt-bindings: serial: samsung: gs101: make reg-io-width required
    property
  tty: serial: samsung: add gs101 earlycon support
  clk: samsung: gs101: add support for cmu_peric0
  clk: samsung: gs101: mark PERIC0 IP TOP gate clock as critical
  arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
  arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
  arm64: dts: exynos: gs101: define USI8 with I2C configuration
  arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
  arm64: defconfig: sync with savedefconfig
  arm64: defconfig: make at24 eeprom builtin

 .../bindings/clock/google,gs101-clock.yaml    |  25 +-
 .../devicetree/bindings/i2c/i2c-exynos5.yaml  |   1 +
 .../bindings/serial/samsung_uart.yaml         |   4 +
 .../boot/dts/exynos/google/gs101-oriole.dts   |  18 +
 arch/arm64/boot/dts/exynos/google/gs101.dtsi  |  52 +-
 arch/arm64/configs/defconfig                  | 146 ++--
 drivers/clk/samsung/clk-gs101.c               | 748 ++++++++++++++++--
 drivers/tty/serial/samsung_tty.c              |  11 +
 include/dt-bindings/clock/google,gs101.h      | 230 ++++--
 9 files changed, 980 insertions(+), 255 deletions(-)

-- 
2.43.0.472.g3155946c3a-goog