Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
From:   Tudor Ambarus <tudor.ambarus@linaro.org>
To:     peter.griffin@linaro.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, mturquette@baylibre.com,
        sboyd@kernel.org, conor+dt@kernel.org, andi.shyti@kernel.org,
        alim.akhtar@samsung.com, gregkh@linuxfoundation.org,
        jirislaby@kernel.org, catalin.marinas@arm.com, will@kernel.org,
        s.nawrocki@samsung.com, tomasz.figa@gmail.com,
        cw00.choi@samsung.com, arnd@arndb.de, semen.protsenko@linaro.org
Cc:     andre.draszik@linaro.org, saravanak@google.com,
        willmcvicker@google.com, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-i2c@vger.kernel.org, linux-serial@vger.kernel.org,
        Tudor Ambarus <tudor.ambarus@linaro.org>
Subject: [PATCH 09/13] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
Date:   Thu, 14 Dec 2023 10:52:39 +0000
Message-ID: <20231214105243.3707730-10-tudor.ambarus@linaro.org>
In-Reply-To: <20231214105243.3707730-1-tudor.ambarus@linaro.org>
References: <20231214105243.3707730-1-tudor.ambarus@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Get rid of the dummy clock and start using the cmu_peric0 clocks
for the usi_uart and serial_0 nodes.

Tested the serial at 115200, 1000000 and 3000000 baudrates,
everthing went fine.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index d0b0ad70c6ba..ffb7b4d89a8c 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -180,14 +180,6 @@ HERA_CPU_SLEEP: cpu-hera-sleep {
 		};
 	};
 
-	/* TODO replace with CCF clock */
-	dummy_clk: clock-3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12345>;
-		clock-output-names = "pclk";
-	};
-
 	/* ect node is required to be present by bootloader */
 	ect {
 	};
@@ -369,7 +361,8 @@ usi_uart: usi@10a000c0 {
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clocks = <&dummy_clk>, <&dummy_clk>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI0_UART>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x1020>;
 			samsung,mode = <USI_V2_UART>;
@@ -381,7 +374,8 @@ serial_0: serial@10a00000 {
 				reg-io-width = <4>;
 				interrupts = <GIC_SPI 634
 					      IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI0_UART>;
 				clock-names = "uart", "clk_uart_baud0";
 				samsung,uart-fifosize = <256>;
 				status = "disabled";
-- 
2.43.0.472.g3155946c3a-goog