Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.34 as permitted sender) client-ip=23.128.96.34;
Date:   Thu, 14 Dec 2023 16:44:46 +0530
From:   Viresh Kumar <viresh.kumar@linaro.org>
To:     Brandon Cheo Fusi <fusibrandon13@gmail.com>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Samuel Holland <samuel@sholland.org>,
        Paul Walmsley <paul.walmsley@sifive.com>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        "Rafael J . Wysocki" <rafael@kernel.org>,
        Yangtao Li <tiny.windzz@gmail.com>, devicetree@vger.kernel.org,
        linux-riscv@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev,
        linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 1/5] riscv: dts: allwinner: Update opp table to allow CPU
 frequency scaling
Message-ID: <20231214111446.camz2krqanaieybh@vireshk-i7>
References: <20231214103342.30775-1-fusibrandon13@gmail.com>
 <20231214103342.30775-2-fusibrandon13@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20231214103342.30775-2-fusibrandon13@gmail.com>
Precedence: bulk

On 14-12-23, 11:33, Brandon Cheo Fusi wrote:
> Two OPPs are currently defined for the D1/D1s; one at 408MHz and
> another at 1.08GHz. Switching between these can be done with the
> "sun50i-cpufreq-nvmem" driver. This patch populates the opp table
> appropriately, with inspiration from
> https://github.com/Tina-Linux/linux-5.4/blob/master/arch/riscv/boot/dts/sunxi/sun20iw1p1.dtsi
> 
> The supply voltages are PWM-controlled, but support for that IP
> is still in the works. So stick to a fixed 0.9V vdd-cpu supply,
> which seems to be the default on most D1 boards.
> 
> Signed-off-by: Brandon Cheo Fusi <fusibrandon13@gmail.com>
> ---
>  arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi | 18 +++++++++++++++---
>  1 file changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
> index 64c3c2e6c..e211fe4c7 100644
> --- a/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
> @@ -39,16 +39,22 @@ cpu0_intc: interrupt-controller {
>  	};
>  
>  	opp_table_cpu: opp-table-cpu {
> -		compatible = "operating-points-v2";
> +		compatible = "allwinner,sun20i-d1-operating-points",

I don't think you should add a new compatible for every SoC that needs
to be supported by a DT bindings and cpufreq driver. Maybe you should
just reuse "allwinner,sun50i-h6-operating-points" and it will work
fine for you ?

Rob ?

> +				 "allwinner,sun50i-h6-operating-points";
> +		nvmem-cells = <&cpu_speed_grade>;
> +		nvmem-cell-names = "speed";
> +		opp-shared;
>  
>  		opp-408000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
>  			opp-hz = /bits/ 64 <408000000>;
> -			opp-microvolt = <900000 900000 1100000>;
> +			opp-microvolt-speed0 = <900000>;

The separate property name thing was required when you could have
different values for different SoC instances, which can be read from
efuses, like in your case.

But all I see is speed0 here, why don't you always set opp-microvolt
then ?

Also why degrade from min/max/target type to just target ?

>  		};
>  
>  		opp-1080000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
>  			opp-hz = /bits/ 64 <1008000000>;
> -			opp-microvolt = <900000 900000 1100000>;
> +			opp-microvolt-speed0 = <900000>;
>  		};
>  	};
>  
> @@ -115,3 +121,8 @@ pmu {
>  			<0x00000000 0x0000000f 0xffffffff 0xffffffff 0x00020000>;
>  	};
>  };
> +
> +&sid {
> +	cpu_speed_grade: cpu-speed-grade@0 {
> +		reg = <0x00 0x2>;
> +	};
> +};
> -- 
> 2.30.2

-- 
viresh