Received-SPF: pass (google.com: domain of linux-kernel+bounces-1903-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Christian Marangi <ansuelsmth@gmail.com>,
	netdev@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Tobias Waldekranz <tobias@waldekranz.com>
Subject: [net-next PATCH v4 1/4] dt-bindings: net: phy: Document new LEDs polarity property
Date: Fri, 15 Dec 2023 22:22:41 +0100
Message-Id: <20231215212244.1658-2-ansuelsmth@gmail.com>
In-Reply-To: <20231215212244.1658-1-ansuelsmth@gmail.com>
References: <20231215212244.1658-1-ansuelsmth@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Document new LEDs polarity property to define what mode the LED needs to
be put to turn it on.

Currently supported modes are:

- active-low
- active-high
- active-low-tristate
- active-high-tristate

Mode is optional and if it's not defined, a default value is chosed by
the driver.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v4:
- Drop support for global active-low
- Rework to polarity option (for marvell10g series support)
Changes v3:
- Out of RFC
Changes v2:
- Add this patch

 .../devicetree/bindings/net/ethernet-phy.yaml         | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 8fb2a6ee7e5b..282bf18f50fd 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -225,6 +225,17 @@ properties:
               driver dependent and required for ports that define multiple
               LED for the same port.
 
+          polarity:
+            description: |
+              Electrical polarity and drive type for the LED to turn it
+              on.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum:
+              - active-low
+              - active-high
+              - active-low-tristate
+              - active-high-tristate
+
         required:
           - reg
 
-- 
2.40.1