Received-SPF: pass (google.com: domain of linux-kernel+bounces-2270-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Alex Bee <knaerzche@gmail.com>
To: Sandy Huang <hjc@rock-chips.com>,
	=?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>,
	Andy Yan <andyshrk@163.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Alex Bee <knaerzche@gmail.com>
Subject: [PATCH v2 22/27] drm/rockchip: inno_hdmi: Add RK3128 support
Date: Sat, 16 Dec 2023 17:26:33 +0100
Message-ID: <20231216162639.125215-23-knaerzche@gmail.com>
In-Reply-To: <20231216162639.125215-1-knaerzche@gmail.com>
References: <20231216162639.125215-1-knaerzche@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

This variant requires the phy reference clock to be enabled before the DDC
block can work and the (initial) DDC bus frequency is calculated based on
the rate of this clock. Besides the only difference is phy configuration
required to make the driver working for this variant as well.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
changes in v2:
 - no changes

 drivers/gpu/drm/rockchip/inno_hdmi.c | 46 +++++++++++++++++++++++++---
 1 file changed, 41 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 579baba6a61b..792e5fad09bf 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -51,6 +51,7 @@ struct inno_hdmi {
 	struct device *dev;
 
 	struct clk *pclk;
+	struct clk *refclk;
 	void __iomem *regs;
 
 	struct drm_connector	connector;
@@ -133,6 +134,12 @@ static struct inno_hdmi_phy_config rk3036_hdmi_phy_configs[] = {
 	{      ~0UL, 0x00, 0x00 }
 };
 
+static struct inno_hdmi_phy_config rk3128_hdmi_phy_configs[] = {
+	{  74250000, 0x3f, 0xaa },
+	{ 165000000, 0x5f, 0xaa },
+	{      ~0UL, 0x00, 0x00 }
+};
+
 static int inno_hdmi_find_phy_config(struct inno_hdmi *hdmi,
 				     unsigned long pixelclk)
 {
@@ -182,13 +189,17 @@ static unsigned long inno_hdmi_tmds_rate(struct inno_hdmi *hdmi)
 	}
 
 	/*
-	 * When IP controller haven't configured to an accurate video
-	 * timing, then the TMDS clock source would be switched to
-	 * PCLK_HDMI, so we need to init the TMDS rate to PCLK rate,
-	 * and reconfigure the DDC clock.
+	 * When IP controller isn't configured to an accurate
+	 * video timing and there is no reference clock available,
+	 * then the TMDS clock source would be switched to PCLK_HDMI,
+	 * so we need to init the TMDS rate to PCLK rate, and
+	 * reconfigure the DDC clock.
 	 */
 
-	return clk_get_rate(hdmi->pclk);
+	if (hdmi->refclk)
+		return clk_get_rate(hdmi->refclk);
+	else
+		return clk_get_rate(hdmi->pclk);
 }
 
 static void inno_hdmi_i2c_init(struct inno_hdmi *hdmi)
@@ -912,6 +923,20 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	hdmi->refclk = devm_clk_get_optional(hdmi->dev, "ref");
+	if (IS_ERR(hdmi->refclk)) {
+		DRM_DEV_ERROR(hdmi->dev, "Unable to get HDMI reference clock\n");
+		ret = PTR_ERR(hdmi->refclk);
+		goto err_disable_pclk;
+	}
+
+	ret = clk_prepare_enable(hdmi->refclk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev,
+			      "Cannot enable HDMI reference clock: %d\n", ret);
+		goto err_disable_pclk;
+	}
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = irq;
@@ -951,6 +976,8 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
 err_put_adapter:
 	i2c_put_adapter(hdmi->ddc);
 err_disable_clk:
+	clk_disable_unprepare(hdmi->refclk);
+err_disable_pclk:
 	clk_disable_unprepare(hdmi->pclk);
 	return ret;
 }
@@ -964,6 +991,7 @@ static void inno_hdmi_unbind(struct device *dev, struct device *master,
 	hdmi->encoder.encoder.funcs->destroy(&hdmi->encoder.encoder);
 
 	i2c_put_adapter(hdmi->ddc);
+	clk_disable_unprepare(hdmi->refclk);
 	clk_disable_unprepare(hdmi->pclk);
 }
 
@@ -987,10 +1015,18 @@ static const struct inno_hdmi_variant rk3036_inno_hdmi_variant = {
 	.default_phy_config = &rk3036_hdmi_phy_configs[1],
 };
 
+static const struct inno_hdmi_variant rk3128_inno_hdmi_variant = {
+	.phy_configs = rk3128_hdmi_phy_configs,
+	.default_phy_config = &rk3128_hdmi_phy_configs[1],
+};
+
 static const struct of_device_id inno_hdmi_dt_ids[] = {
 	{ .compatible = "rockchip,rk3036-inno-hdmi",
 	  .data = &rk3036_inno_hdmi_variant,
 	},
+	{ .compatible = "rockchip,rk3128-inno-hdmi",
+	  .data = &rk3128_inno_hdmi_variant,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, inno_hdmi_dt_ids);
-- 
2.43.0