Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755723AbXLGNcW (ORCPT ); Fri, 7 Dec 2007 08:32:22 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752142AbXLGNcO (ORCPT ); Fri, 7 Dec 2007 08:32:14 -0500 Received: from hades.rz.tu-clausthal.de ([139.174.2.20]:56732 "EHLO hades.rz.tu-clausthal.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751246AbXLGNcO (ORCPT ); Fri, 7 Dec 2007 08:32:14 -0500 From: "Hemmann, Volker Armin" To: Andrew Morton Subject: Re: question about sata-error on boot. Date: Fri, 7 Dec 2007 14:32:08 +0100 User-Agent: KMail/1.9.7 Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org References: <200711021934.21123.volker.armin.hemmann@tu-clausthal.de> <20071106221556.55c3cd0b.akpm@linux-foundation.org> In-Reply-To: <20071106221556.55c3cd0b.akpm@linux-foundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712071432.08699.volker.armin.hemmann@tu-clausthal.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4061 Lines: 82 Hi, On Mittwoch, 7. November 2007, Andrew Morton wrote: > > On Fri, 2 Nov 2007 19:34:20 +0100 "Hemmann, Volker Armin" > > wrote: Hi, > > (cc linux-ide) > > > for some time (and I can't say for how long, but the board is less than a > > month old) I get this error on boot: > > > > [ 42.116273] ahci 0000:00:0a.0: version 2.2 > > [ 42.116482] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 > > [ 42.116653] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI > > 23 (level, low) -> IRQ 23 > > [ 43.119478] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps > > 0xf impl IDE mode > > [ 43.119778] ahci 0000:00:0a.0: flags: 64bit led clo pmp pio > > [ 43.119943] PCI: Setting latency timer of device 0000:00:0a.0 to 64 > > [ 43.120149] scsi0 : ahci > > [ 43.120365] scsi1 : ahci > > [ 43.120556] scsi2 : ahci > > [ 43.120741] scsi3 : ahci > > [ 43.120927] ata1: SATA max UDMA/133 cmd 0xffffc20000014100 ctl > > 0x0000000000000000 bmdma 0x0000000000000000 irq 315 > > [ 43.121227] ata2: SATA max UDMA/133 cmd 0xffffc20000014180 ctl > > 0x0000000000000000 bmdma 0x0000000000000000 irq 315 > > [ 43.121526] ata3: SATA max UDMA/133 cmd 0xffffc20000014200 ctl > > 0x0000000000000000 bmdma 0x0000000000000000 irq 315 > > [ 43.121826] ata4: SATA max UDMA/133 cmd 0xffffc20000014280 ctl > > 0x0000000000000000 bmdma 0x0000000000000000 irq 315 > > [ 43.934296] ata1: softreset failed (1st FIS failed) > > [ 43.934461] ata1: reset failed (errno=-5), retrying in 10 secs > > [ 53.885194] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > [ 53.885890] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max > > UDMA/133 [ 53.886056] ata1.00: 312581808 sectors, multi 16: LBA48 > > [ 53.886804] ata1.00: configured for UDMA/133 > > [ 54.201147] ata2: SATA link down (SStatus 0 SControl 300) > > [ 54.517101] ata3: SATA link down (SStatus 0 SControl 300) > > [ 54.833055] ata4: SATA link down (SStatus 0 SControl 300) this is gone with 2.6.22.13 an 2.6.23.9: [ 33.277039] scsi0 : ahci [ 33.277262] scsi1 : ahci [ 33.277454] scsi2 : ahci [ 33.277645] scsi3 : ahci [ 33.277826] ata1: SATA max UDMA/133 cmd 0xffffc20000020100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 33.278120] ata2: SATA max UDMA/133 cmd 0xffffc20000020180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 33.278414] ata3: SATA max UDMA/133 cmd 0xffffc20000020200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 33.278708] ata4: SATA max UDMA/133 cmd 0xffffc20000020280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 33.751855] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 33.752659] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 33.752821] ata1.00: 312581808 sectors, multi 16: LBA48 [ 33.753574] ata1.00: configured for UDMA/133 [ 34.067809] ata2: SATA link down (SStatus 0 SControl 300) [ 34.383762] ata3: SATA link down (SStatus 0 SControl 300) [ 34.699717] ata4: SATA link down (SStatus 0 SControl 300) [ 34.700029] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5 [ 34.700377] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 34.700544] sd 0:0:0:0: [sda] Write Protect is off [ 34.700703] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 34.700712] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.701026] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 34.701191] sd 0:0:0:0: [sda] Write Protect is off [ 34.701350] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 34.701358] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.701651] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/