Received-SPF: pass (google.com: domain of linux-kernel+bounces-5413-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Date: Tue, 19 Dec 2023 16:49:18 +0200
From: Andy Shevchenko <andy@kernel.org>
To: xiongxin <xiongxin@kylinos.cn>
Cc: fancer.lancer@gmail.com, hoan@os.amperecomputing.com,
	linus.walleij@linaro.org, brgl@bgdev.pl, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@kernel.org,
	Riwen Lu <luriwen@kylinos.cn>
Subject: Re: [PATCH v4] gpio: dwapb: mask/unmask IRQ when disable/enale it
Message-ID: <ZYGtbgmQS0x43l3k@smile.fi.intel.com>
References: <20231219101620.4617-1-xiongxin@kylinos.cn>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20231219101620.4617-1-xiongxin@kylinos.cn>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo

On Tue, Dec 19, 2023 at 06:16:20PM +0800, xiongxin wrote:

Code wise it's fine, but while answering to Serge's email I realized that
the Subject has a typo and additionally you or Bart (if he is fine with that)
can amend:

> In the hardware implementation of the i2c hid driver based on dwapb gpio

I?C HID (alternatively: I2C HID)

here and everywhere else in the commit message unless it's the file or
function name.

> irq,

DesignWare GPIO IRQ chip

> when the user continues to use the i2c hid device in the suspend
> process, the i2c hid interrupt will be masked after the resume process
> is finished.
> 
> This is because the disable_irq()/enable_irq() of the dwapb gpio driver

DesignWare GPIO

> does not synchronize the irq mask register state. In normal use of the

IRQ

> i2c hid procedure, the gpio irq irq_mask()/irq_unmask() functions are
> called in pairs. In case of an exception, i2c_hid_core_suspend() calls
> disable_irq() to disable the gpio irq. With low probability, this causes

GPIO IRQ

> irq_unmask() to not be called, which causes the gpio irq to be masked

GPIO IRQ

> and not unmasked in enable_irq(), raising an exception.
> 
> Add synchronization to the masked register state in the
> dwapb_irq_enable()/dwapb_irq_disable() function. mask the gpio irq

GPIO IRQ

> before disabling it. After enabling the gpio irq, unmask the irq.

GPIO IRQ
IRQ

-- 
With Best Regards,
Andy Shevchenko