Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757781AbXLHKNS (ORCPT ); Sat, 8 Dec 2007 05:13:18 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753502AbXLHKNC (ORCPT ); Sat, 8 Dec 2007 05:13:02 -0500 Received: from rhlx01.hs-esslingen.de ([129.143.116.10]:53766 "EHLO rhlx01.hs-esslingen.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752167AbXLHKM7 (ORCPT ); Sat, 8 Dec 2007 05:12:59 -0500 Date: Sat, 8 Dec 2007 11:12:57 +0100 From: Andreas Mohr To: Andrew Morton Cc: "Rafael J. Wysocki" , LKML , Linus Torvalds , Ingo Molnar , linux-ide@vger.kernel.org, Tejun Heo Subject: Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23 Message-ID: <20071208101256.GA25807@rhlx01.hs-esslingen.de> References: <200712080340.49546.rjw@sisk.pl> <20071208013631.3147986a.akpm@linux-foundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20071208013631.3147986a.akpm@linux-foundation.org> X-Priority: none User-Agent: Mutt/1.5.17 (2007-11-01) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19236 Lines: 438 Hi, On Sat, Dec 08, 2007 at 01:36:31AM -0800, Andrew Morton wrote: > > Subject : PATA scan: ACPI Exception AE_AML_PACKAGE_LIMIT... is beyond end of object > > Submitter : Hans de Bruin > > References : http://bugzilla.kernel.org/show_bug.cgi?id=9320 > > Handled-By : Robert Moore > > Tejun Heo > > Fu Michael > > Patch : > > > > A number of other people are seeing the same thing and Tejun is putting in > a blacklist of machines which cannot use libata+acpi. That patch is not > yet in any git tree which I pull. > > AFACIT the machines kepe working OK - there's just some nasty dmesg spew. > > If any machines _are_ breaking then this could cause real problems and I'd > prefer that we either go for a whitelist or arrange to detect the condition > and fall back to non-acpi ata. Does this report now win me the lucky draw, pretty please? ;) STD regression rc1 -> rc234, suspend fails completely, recovering is pretty much useless since HDD is DEAD from this point on anyway. Managed to capture -rc2 suspend logging via still-alive ssh session. 2.6.24-rc1 suspend/resume log, successful (well, a couple seconds delay, most likely due to well-recovered AML failure): swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Shrinking memory... done (0 pages freed) Freed 0 kbytes in 0.02 seconds (0.00 MB/s) Suspending console(s) hub 4-0:1.0: hub_suspend usb usb4: bus suspend ehci_hcd 0000:00:10.3: suspend root hub hub 3-0:1.0: hub_suspend usb usb3: bus suspend usb usb3: suspend_rh hub 2-0:1.0: hub_suspend usb usb2: bus suspend usb usb2: suspend_rh hub 1-0:1.0: hub_suspend usb usb1: bus suspend usb usb1: suspend_rh sd 0:0:0:0: [sda] Synchronizing SCSI cache parport_pc 00:09: disabled serial 00:08: disabled serial 00:07: disabled ACPI: PCI interrupt for device 0000:00:11.5 disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:00:11.1 disabled ACPI: PCI interrupt for device 0000:00:10.3 disabled ehci_hcd 0000:00:10.3: --> PCI D3/wakeup uhci_hcd 0000:00:10.2: uhci_suspend ACPI: PCI interrupt for device 0000:00:10.2 disabled uhci_hcd 0000:00:10.2: --> PCI D3 uhci_hcd 0000:00:10.1: uhci_suspend ACPI: PCI interrupt for device 0000:00:10.1 disabled uhci_hcd 0000:00:10.1: --> PCI D3 uhci_hcd 0000:00:10.0: uhci_suspend ACPI: PCI interrupt for device 0000:00:10.0 disabled uhci_hcd 0000:00:10.0: --> PCI D3 ACPI: PCI interrupt for device 0000:00:0d.0 disabled ACPI handle has no context! ACPI: PCI interrupt for device 0000:00:0c.0 disabled ACPI handle has no context! pci_set_power_state(): 0000:00:00.0: state=3, current state=5 swsusp: critical section: swsusp: Need to copy 51195 pages Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. evxfevnt-0079 [00] enable : System is already in ACPI mode ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 evxfevnt-0079 [00] enable : System is already in ACPI mode ACPI: Unable to turn cooling device [c180ff60] 'off' PCI: Setting latency timer of device 0000:00:01.0 to 64 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[db140000-db1407ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 e100: eth-intel: e100_watchdog: link up, 100Mbps, full-duplex PM: Writing back config space on device 0000:00:0d.0 at offset 1 (was 2100007, writing 2100003) ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.0: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: uhci_resume uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.0: Performing full reset usb usb1: root hub lost power or was reset usb usb1: suspend_rh uhci_hcd 0000:00:10.1: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.1: uhci_resume uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.1: Performing full reset usb usb2: root hub lost power or was reset usb usb2: suspend_rh uhci_hcd 0000:00:10.2: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.2: uhci_resume uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.2: Performing full reset usb usb3: root hub lost power or was reset usb usb3: suspend_rh ehci_hcd 0000:00:10.3: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20 PM: Writing back config space on device 0000:00:10.3 at offset 3 (was 2008, writing 2010) PM: Writing back config space on device 0000:00:10.3 at offset 1 (was 2100007, writing 2100017) PM: Writing back config space on device 0000:00:11.1 at offset 1 (was 2900003, writing 2900007) ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:11.5 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 serial 00:07: activated serial 00:08: activated parport_pc 00:09: activated i8042 aux 00:0a: activation failed i8042 kbd 00:0b: activation failed sd 0:0:0:0: [sda] Starting disk ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node c180b888), AE_AML_PACKAGE_LIMIT ata1.01: _GTF evaluation failed (AE 0x300d) ata1.01: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node c180b888), AE_AML_PACKAGE_LIMIT ata1.01: _GTF evaluation failed (AE 0x300d) ata1.01: ACPI on devcfg failed the second time, disabling (errno=-5) ata1.01: revalidation failed (errno=1) ata1: failed to recover some devices, retrying in 5 secs ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c180b840), AE_AML_PACKAGE_LIMIT ata1.00: _GTF evaluation failed (AE 0x300d) ata1.00: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c180b840), AE_AML_PACKAGE_LIMIT ata1.00: _GTF evaluation failed (AE 0x300d) ata1.00: ACPI on devcfg failed the second time, disabling (errno=-5) ata1.00: revalidation failed (errno=1) ata1: failed to recover some devices, retrying in 5 secs ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb usb1: usb resume usb usb1: wakeup_rh hub 1-0:1.0: trying to enable port power on non-switchable hub usb usb2: usb resume usb usb2: wakeup_rh hub 2-0:1.0: trying to enable port power on non-switchable hub usb usb3: usb resume usb usb3: wakeup_rh hub 3-0:1.0: trying to enable port power on non-switchable hub usb usb4: usb resume ehci_hcd 0000:00:10.3: resume root hub hub 4-0:1.0: hub_resume Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.0: port 1 portsc 018a,00 hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s done. swsusp: Basic memory bitmaps freed hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 uhci_hcd 0000:00:10.0: port 2 portsc 008a,00 hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.1: port 1 portsc 018a,00 hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 uhci_hcd 0000:00:10.1: port 2 portsc 008a,00 hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.2: port 1 portsc 008a,00 hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 uhci_hcd 0000:00:10.2: port 2 portsc 008a,00 hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 usb usb1: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb3: suspend_rh (auto-stop) agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode 2.6.24-rc2 suspend log (one screenful), UNSUCCESSFUL: serial 00:07: disabled ACPI: PCI interrupt for device 0000:00:11.5 disabled ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTM_] (Node c180b9a8), AE_AML_PACKAGE_LIMIT ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1._GTM] (Node c180b8d0), AE_AML_PACKAGE_LIMIT ata2: ACPI get timing mode failed (AE 0x300d) pci_device_suspend(): ata_pci_device_suspend+0x0/0x40() returns -22 suspend_device(): pci_device_suspend+0x0/0x70() returns -22 Could not suspend device 0000:00:11.1: error -22 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 serial 00:07: activated serial 00:08: activated parport_pc 00:09: activated i8042 aux 00:0a: activation failed i8042 kbd 00:0b: activation failed sd 0:0:0:0: [sda] Starting disk sd 0:0:0:0: timing out command, waited 180s sd 0:0:0:0: [sda] START_STOP FAILED sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 done. swsusp: Basic memory bitmaps freed swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created Syncing filesystems ... # lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] 00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) 00:0a.0 Multimedia audio controller: Aureal Semiconductor Vortex 2 (rev fe) 00:0c.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08) 00:0d.0 Multimedia audio controller: Aztech System Ltd 3328 Audio (rev 10) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01) 01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01) # dmidecode 2.9 SMBIOS 2.2 present. 39 structures occupying 1035 bytes. Table at 0x000F0800. Handle 0x0000, DMI type 0, 19 bytes BIOS Information Vendor: Award Software International, Inc. Version: 6.00 PG Release Date: 09/16/2003 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: VIA Technologies, Inc. Product Name: VT8367-8235 Version: Serial Number: UUID: Not Present Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: Product Name: VT8367-8235 Version: Serial Number: Handle 0x0003, DMI type 3, 13 bytes Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown Handle 0x0004, DMI type 4, 32 bytes Processor Information Socket Designation: Socket A Type: Central Processor Family: Duron Manufacturer: AMD ID: 81 06 00 00 FF FB 83 03 Signature: Family 6, Model 8, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) Version: AMD K7 processor Voltage: 3.3 V External Clock: 133 MHz Max Speed: 1500 MHz Current Speed: 1200 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x000A L2 Cache Handle: 0x000B L3 Cache Handle: No L3 Cache Handle 0x0005, DMI type 5, 24 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: Four-way Interleave Maximum Memory Module Size: 32 MB Maximum Total Memory Size: 128 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: Standard EDO Memory Module Voltage: 5.0 V Associated Memory Slots: 4 0x0006 0x0007 0x0008 0x0009 Enabled Error Correcting Capabilities: None . . . # hdparm -i /dev/sda /dev/sda: Model=WDC WD1200JB-00CRA1 , FwRev=17.07W17, SerialNo=WD-WCA8C4285629 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?16? CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode Athlon on EPOX 8K5A2+ board. Again, 2.6.23 and 2.6.24-rc1 work, yet 2.6.24 -rc2, -rc3 and -rc4 FAIL. Probably won't be able to do any reporting over the weekend (WOL is inoperable ATM for some weird reason), let me know what you need. Took too much time to gather this report already anyway ;) Thanks, Andreas Mohr -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/