Received-SPF: pass (google.com: domain of linux-kernel+bounces-5924-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Javier Martinez Canillas <javierm@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
	Maxime Ripard <mripard@kernel.org>,
	Peter Robinson <pbrobinson@gmail.com>,
	Rob Herring <robh@kernel.org>,
	Conor Dooley <conor@kernel.org>,
	Jocelyn Falempe <jfalempe@redhat.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Javier Martinez Canillas <javierm@redhat.com>,
	Conor Dooley <conor+dt@kernel.org>,
	Daniel Vetter <daniel@ffwll.ch>,
	David Airlie <airlied@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org,
	dri-devel@lists.freedesktop.org
Subject: [PATCH v3 0/4] drm/solomon: Add support for the SSD133x controller family
Date: Tue, 19 Dec 2023 21:34:05 +0100
Message-ID: <20231219203416.2299702-1-javierm@redhat.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Hello,

This patch-set adds support for the family of SSD133x Solomon controllers,
such as the SSD1331. These are used for RGB Dot Matrix OLED/PLED panels.

This is a v3 that addresses issues pointed out in v2:

https://lore.kernel.org/dri-devel/20231218132045.2066576-1-javierm@redhat.com/

The patches were tested on a Waveshare SSD1331 display using glmark2-drm,
fbcon, fbtests and the retroarch emulator. The binding schema were tested
using the `make W=1 dt_binding_check` target.

Patch #1 and #2 are fixes for the DT binding schema of the existing SSD130x
and SSD132x families.

Patch #3 adds a DT binding schema for the SSD133x controllers and patch #4
extends the ssd130x DRM driver to support the SSD133x controller family.

Best regards,
Javier

Changes in v3:
- Move solomon,ssd-common.yaml ref before the properties section and
  width/height constraints after the other properties (Conor Dooley).

Changes in v2:
- Unconditionally set the width and height constraints (Conor Dooley).
- Fix indentation in the DTS examples (Krzysztof Kozlowski).

Javier Martinez Canillas (4):
  dt-bindings: display: ssd1307fb: Add vendor prefix to width and height
  dt-bindings: display: ssd132x: Add vendor prefix to width and height
  dt-bindings: display: Add SSD133x OLED controllers
  drm/ssd130x: Add support for the SSD133x OLED controller family

 .../bindings/display/solomon,ssd1307fb.yaml   |  20 +-
 .../bindings/display/solomon,ssd132x.yaml     |  12 +-
 .../bindings/display/solomon,ssd133x.yaml     |  57 +++
 drivers/gpu/drm/solomon/ssd130x-i2c.c         |   5 +
 drivers/gpu/drm/solomon/ssd130x-spi.c         |   7 +
 drivers/gpu/drm/solomon/ssd130x.c             | 370 ++++++++++++++++++
 drivers/gpu/drm/solomon/ssd130x.h             |   5 +-
 7 files changed, 459 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd133x.yaml

-- 
2.43.0