Received-SPF: pass (google.com: domain of linux-kernel+bounces-6458-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
References: <20231218-pinephone-pll-fixes-v1-0-e238b6ed6dc1@oltmanns.dev>
 <20231218-pinephone-pll-fixes-v1-4-e238b6ed6dc1@oltmanns.dev>
 <13411739.uLZWGnKmhe@jernej-laptop>
From: Frank Oltmanns <frank@oltmanns.dev>
To: Jernej =?utf-8?Q?=C5=A0krabec?= <jernej.skrabec@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd
 <sboyd@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Samuel Holland
 <samuel@sholland.org>, Guido =?utf-8?Q?G=C3=BCnther?= <agx@sigxcpu.org>,
 Purism Kernel Team
 <kernel@puri.sm>, Ondrej Jirman <megi@xff.cz>, Neil Armstrong
 <neil.armstrong@linaro.org>, Jessica Zhang <quic_jesszhan@quicinc.com>,
 Sam Ravnborg <sam@ravnborg.org>, Maarten Lankhorst
 <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>,
 Thomas Zimmermann <tzimmermann@suse.de>, David Airlie <airlied@gmail.com>,
 Daniel Vetter <daniel@ffwll.ch>, linux-clk@vger.kernel.org,
 linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev,
 linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 4/5] clk: sunxi-ng: a64: Add constraints on PLL-VIDEO0's
 n/m ratio
Date: Wed, 20 Dec 2023 08:09:28 +0100
In-reply-to: <13411739.uLZWGnKmhe@jernej-laptop>
Message-ID: <87il4t9wi1.fsf@oltmanns.dev>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable


On 2023-12-19 at 17:54:19 +0100, Jernej =C5=A0krabec <jernej.skrabec@gmail.=
com> wrote:
> Dne ponedeljek, 18. december 2023 ob 14:35:22 CET je Frank Oltmanns napis=
al(a):
>> The Allwinner A64 manual lists the following constraint for the
>> PLL-VIDEO0 clock: 8 <=3D N/M <=3D 25
>>
>> Use this constraint.
>>
>> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
>> ---
>>  drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 8 ++++++--
>>  1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-n=
g/ccu-sun50i-a64.c
>> index c034ac027d1c..75d839da446c 100644
>> --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
>> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
>> @@ -68,7 +68,8 @@ static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_=
clk, "pll-audio-base",
>>  				       BIT(28),	/* lock */
>>  				       CLK_SET_RATE_UNGATE);
>>
>> -static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST(pll_video0_clk,=
 "pll-video0",
>> +static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_FEAT_NM_RATIO(pll_video=
0_clk,
>> +						"pll-video0",
>>  						"osc24M", 0x010,
>>  						192000000,	/* Minimum rate */
>>  						1008000000,	/* Maximum rate */
>> @@ -80,7 +81,10 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSE=
ST(pll_video0_clk, "pll-vid
>>  						297000000,	/* frac rate 1 */
>>  						BIT(31),	/* gate */
>>  						BIT(28),	/* lock */
>> -						CLK_SET_RATE_UNGATE);
>> +						CLK_SET_RATE_UNGATE,
>> +						CCU_FEATURE_FRACTIONAL |
>> +						CCU_FEATURE_CLOSEST_RATE,
>
> Above flags are unrelated change, put them in new patch if needed.

You might notice that I am using a new macro for initializing the
pll_video0_clk struct:
New: SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_FEAT_NM_RATIO
Old: SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_CLOSEST

Setting the two CCU_FEATURE flags is part of the old initialization
macro.

I'll add SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX_NM_RATIO_CLOSEST which
hopefully resolves the confusion.

Thanks,
  Frank

>
> Best regards,
> Jernej
>
>> +						8, 25);		/* min/max nm ratio */
>>
>>  static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
>>  					"osc24M", 0x018,
>>
>>