Received-SPF: pass (google.com: domain of linux-kernel+bounces-7823-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Bjorn Andersson <quic_bjorande@quicinc.com>
Date: Wed, 20 Dec 2023 19:50:40 -0800
Subject: [PATCH 6/8] arm64: dts: qcom: sa8295p-adp: add max20411
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-ID: <20231220-sa8295p-gpu-v1-6-d8cdf2257f97@quicinc.com>
References: <20231220-sa8295p-gpu-v1-0-d8cdf2257f97@quicinc.com>
In-Reply-To: <20231220-sa8295p-gpu-v1-0-d8cdf2257f97@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio
	<konrad.dybcio@linaro.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
        "Krzysztof
 Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley
	<conor+dt@kernel.org>,
        Taniya Das <quic_tdas@quicinc.com>,
        Ulf Hansson
	<ulf.hansson@linaro.org>,
        Johan Hovold <johan+linaro@kernel.org>,
        "Catalin
 Marinas" <catalin.marinas@arm.com>,
        Will Deacon <will@kernel.org>
CC: <linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-pm@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>,
        "Bjorn
 Andersson" <quic_bjorande@quicinc.com>,
        Bjorn Andersson
	<andersson@kernel.org>

From: Bjorn Andersson <andersson@kernel.org>

The SA8295P ADP has a MAX20411 LDO regulator on I2C 12, supplying the
VDD_GFX pads. Enable the bus and add the maxim,max20411 device on the
bus.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 40 ++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index fd253942e5e5..e16406c9c19d 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -266,6 +266,26 @@ &dispcc1 {
 	status = "okay";
 };
 
+&i2c12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup1_i2c4_state>;
+
+	status = "okay";
+
+	vdd_gfx: regulator@39 {
+		compatible = "maxim,max20411";
+		reg = <0x39>;
+
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <968750>;
+
+		enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&max20411_en>;
+	};
+};
+
 &mdss0 {
 	status = "okay";
 };
@@ -476,6 +496,10 @@ &pcie4_phy {
 	status = "okay";
 };
 
+&qup1 {
+	status = "okay";
+};
+
 &qup2 {
 	status = "okay";
 };
@@ -728,4 +752,20 @@ wake-n-pins {
 			bias-pull-up;
 		};
 	};
+
+	qup1_i2c4_state: qup1-i2c4-state {
+		pins = "gpio0", "gpio1";
+		function = "qup12";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&pmm8540a_gpios {
+	max20411_en: max20411-en-state {
+		pins = "gpio2";
+		function = "normal";
+		output-enable;
+	};
 };

-- 
2.25.1