Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752473AbXLIRAV (ORCPT ); Sun, 9 Dec 2007 12:00:21 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750850AbXLIRAI (ORCPT ); Sun, 9 Dec 2007 12:00:08 -0500 Received: from echo836.server4you.de ([85.25.140.112]:39249 "EHLO mail.pianoinflames.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750845AbXLIQ77 (ORCPT ); Sun, 9 Dec 2007 11:59:59 -0500 Message-ID: <475C1F06.4080508@pianoinflames.de> Date: Sun, 09 Dec 2007 17:59:50 +0100 From: Marco Gatti User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: Linus Torvalds CC: Andrew Morton , linux-kernel@vger.kernel.org, Greg KH , Thomas Gleixner , Ingo Molnar Subject: Re: Bug: get EXT3-fs error Allocating block in system zone References: <4755BEA1.4090604@pianoinflames.de> <20071206162500.1f76a234.akpm@linux-foundation.org> <475B0AD7.10500@pianoinflames.de> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 70067 Lines: 1481 Linus Torvalds schrieb: > Was there a dmesg out there somewhere? > > With 4G of RAM, you probably have some of it above the 4GB mark (because > of RAM remapping etc, and the PCI decode hole in the low 4GB). It does > sound like this is a DMA problem, and your controller cannot correctly DMA > to the upper 4GB. > > So what controller/driver, what's the dmesg, and let's see if we can fix > it by adding a DMA mask to it to limit it to the low 32 bits. Controller / drivers: it's a board with intel Q35 chipset. The southbridge has an ICH9 Intel Gigabit 82566DM-2 => e1000 Intel matrix storage SATA => ahci.c Intel graphics media accelerator => not added to kernel Intel Audio => Intel HD Audio AC97 I just got "EXT3-fs error Allocating block in system zone" in dmesg with 4 or more GBs of RAM. I listed boot up dmesg to get an idea of dma config with different amount of RAM. Thanks for your help. dmesg with 2GB: Linux version 2.6.23.9 (root@adira) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #3 SMP Wed Dec 5 20:00:29 CET 2007 Command line: root=/dev/sdb3 udev BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e5c0000 (usable) BIOS-e820: 000000007e5c0000 - 000000007e5c8000 (ACPI data) BIOS-e820: 000000007e5c8000 - 000000007e5cb000 (ACPI NVS) BIOS-e820: 000000007e5cb000 - 000000007e700000 (reserved) BIOS-e820: 000000007e800000 - 0000000080000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 156) 0 entries of 3200 used Entering add_active_range(0, 256, 517568) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F7240, 0014 (r0 PTLTD ) ACPI: RSDT 7E5C2D9F, 0058 (r1 PTLTD RSDT 60000 LTP 0) ACPI: FACP 7E5C7AF3, 0074 (r1 FSC 60000 F4240) ACPI: DSDT 7E5C2DF7, 4CFC (r1 FSC D2587/A1 60000 MSFT 3000001) ACPI: FACS 7E5CAFC0, 0040 ACPI: TCPA 7E5C7B67, 0032 (r1 Phoeni x 60000 TL 0) ACPI: _MAR 7E5C7B99, 0030 (r1 Intel OEMDMAR 60000 LOHR 1) ACPI: SSDT 7E5C7BC9, 007A (r1 FSC CST_CPU0 60000 CSF 1) ACPI: SSDT 7E5C7C43, 007A (r1 FSC CST_CPU1 60000 CSF 1) ACPI: SSDT 7E5C7CBD, 00B6 (r1 FSC PST_CPU0 60000 CSF 1) ACPI: SSDT 7E5C7D73, 00B6 (r1 FSC PST_CPU1 60000 CSF 1) ACPI: SPCR 7E5C7E29, 0050 (r1 PTLTD $UCRTBL$ 60000 PTL 1) ACPI: MCFG 7E5C7E79, 003C (r1 PTLTD MCFG 60000 LTP 0) ACPI: HPET 7E5C7EB5, 0038 (r1 PTLTD HPETTBL 60000 LTP 1) ACPI: APIC 7E5C7EED, 0068 (r1 PTLTD APIC 60000 LTP 0) ACPI: BOOT 7E5C7F55, 0028 (r1 PTLTD $SBFTBL$ 60000 LTP 1) ACPI: ASF! 7E5C7F7D, 0083 (r16 CETP CETP 60000 PTL 1) No NUMA configuration found Faking a node at 0000000000000000-000000007e5c0000 Entering add_active_range(0, 0, 156) 0 entries of 3200 used Entering add_active_range(0, 256, 517568) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007e5c0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 156 0: 256 -> 517568 On node 0 totalpages: 517468 DMA zone: 56 pages used for memmap DMA zone: 1454 pages reserved DMA zone: 2486 pages, LIFO batch:0 DMA32 zone: 7020 pages used for memmap DMA32 zone: 506452 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009c000 - 000000000009d000 swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000 swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 30376 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 508938 Policy zone: DMA32 Kernel command line: root=/dev/sdb3 udev Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2327.499 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Memory: 2035320k/2070272k available (3107k kernel code, 34552k reserved, 1751k data, 328k init) Calibrating delay using timer specific routine.. 4750.72 BogoMIPS (lpj=2375362) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 20781235 Detected 20.781 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4654.94 BogoMIPS (lpj=2327472) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f8000000 - f90fffff ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Device [LPT] status [00000008]: functional but not present; setting present ACPI: Device [ECP] status [00000008]: functional but not present; setting present ACPI: Device [COM2] status [00000008]: functional but not present; setting present ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 11 12 14 15) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:01.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.4 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. pnp: 00:03: iomem range 0xfec00000-0xfecfffff could not be reserved pnp: 00:03: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:03: iomem range 0xf8000000-0xfbffffff could not be reserved pnp: 00:03: iomem range 0xfed19000-0xfed19fff has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x43 set to 0x1 Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] Marking TSC unstable due to possible TSC halt in C2 Time: hpet clocksource has been installed. Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) tpm_tis 00:01: Unable to request irq: 8 for probe Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x1c90 (irq = 17) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ahci 0000:00:1f.2: version 2.3 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: nr_ports (6) and implemented port map (0xf) don't match ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc20000334100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata2: SATA max UDMA/133 cmd 0xffffc20000334180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata3: SATA max UDMA/133 cmd 0xffffc20000334200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata4: SATA max UDMA/133 cmd 0xffffc20000334280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: ST380815AS, 3.AAA, max UDMA/133 ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: Optiarc DVD-ROM DDU1671S, 1.81, max UDMA/33 ata2.00: applying bridge limits ata2.00: configured for UDMA/33 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: WDC WD5000AAKS-65YGA0, 12.01C02, max UDMA/133 ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM Optiarc DVD-ROM DDU1671S 1.81 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 3:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg2 type 0 Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.05 ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt 0000:00:1a.7[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf03a3000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf03a3400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 20, io base 0x000018a0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018c0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018e0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-1 Fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 328k freed Intel(R) PRO/1000 Network Driver - version 7.6.12 Copyright (c) 1999-2007 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:99:13:ca:4f e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection EXT3 FS on sdb3, internal journal Adding 2000084k swap on /dev/sdb2. Priority:-1 extents:1 across:2000084k dmesg with 4GB: Linux version 2.6.23.9 (root@adira) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #3 SMP Wed Dec 5 20:00:29 CET 2007 Command line: root=/dev/sdb3 udev BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df5c0000 (usable) BIOS-e820: 00000000df5c0000 - 00000000df5c8000 (ACPI data) BIOS-e820: 00000000df5c8000 - 00000000df5cb000 (ACPI NVS) BIOS-e820: 00000000df5cb000 - 00000000df700000 (reserved) BIOS-e820: 00000000df800000 - 00000000e0100000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000011a000000 (usable) BIOS-e820: 000000011a000000 - 000000011c000000 (reserved) Entering add_active_range(0, 0, 156) 0 entries of 3200 used Entering add_active_range(0, 256, 914880) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1155072) 2 entries of 3200 used end_pfn_map = 1163264 DMI present. ACPI: RSDP 000F7240, 0014 (r0 PTLTD ) ACPI: RSDT DF5C2D9F, 0058 (r1 PTLTD RSDT 60000 LTP 0) ACPI: FACP DF5C7AF3, 0074 (r1 FSC 60000 F4240) ACPI: DSDT DF5C2DF7, 4CFC (r1 FSC D2587/A1 60000 MSFT 3000001) ACPI: FACS DF5CAFC0, 0040 ACPI: TCPA DF5C7B67, 0032 (r1 Phoeni x 60000 TL 0) ACPI: _MAR DF5C7B99, 0030 (r1 Intel OEMDMAR 60000 LOHR 1) ACPI: SSDT DF5C7BC9, 007A (r1 FSC CST_CPU0 60000 CSF 1) ACPI: SSDT DF5C7C43, 007A (r1 FSC CST_CPU1 60000 CSF 1) ACPI: SSDT DF5C7CBD, 00B6 (r1 FSC PST_CPU0 60000 CSF 1) ACPI: SSDT DF5C7D73, 00B6 (r1 FSC PST_CPU1 60000 CSF 1) ACPI: SPCR DF5C7E29, 0050 (r1 PTLTD $UCRTBL$ 60000 PTL 1) ACPI: MCFG DF5C7E79, 003C (r1 PTLTD MCFG 60000 LTP 0) ACPI: HPET DF5C7EB5, 0038 (r1 PTLTD HPETTBL 60000 LTP 1) ACPI: APIC DF5C7EED, 0068 (r1 PTLTD APIC 60000 LTP 0) ACPI: BOOT DF5C7F55, 0028 (r1 PTLTD $SBFTBL$ 60000 LTP 1) ACPI: ASF! DF5C7F7D, 0083 (r16 CETP CETP 60000 PTL 1) No NUMA configuration found Faking a node at 0000000000000000-000000011a000000 Entering add_active_range(0, 0, 156) 0 entries of 3200 used Entering add_active_range(0, 256, 914880) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1155072) 2 entries of 3200 used Bootmem setup node 0 0000000000000000-000000011a000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1155072 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 156 0: 256 -> 914880 0: 1048576 -> 1155072 On node 0 totalpages: 1021276 DMA zone: 56 pages used for memmap DMA zone: 1456 pages reserved DMA zone: 2484 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 896504 pages, LIFO batch:31 Normal zone: 1456 pages used for memmap Normal zone: 105040 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009c000 - 000000000009d000 swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000 swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000df5c0000 - 00000000df5c8000 swsusp: Registered nosave memory region: 00000000df5c8000 - 00000000df5cb000 swsusp: Registered nosave memory region: 00000000df5cb000 - 00000000df700000 swsusp: Registered nosave memory region: 00000000df700000 - 00000000df800000 swsusp: Registered nosave memory region: 00000000df800000 - 00000000e0100000 swsusp: Registered nosave memory region: 00000000e0100000 - 00000000f8000000 swsusp: Registered nosave memory region: 00000000f8000000 - 00000000fc000000 swsusp: Registered nosave memory region: 00000000fc000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0100000:17f00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 30376 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 1004028 Policy zone: Normal Kernel command line: root=/dev/sdb3 udev Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2327.500 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x1076000 - 0x5076000 Memory: 3949672k/4620288k available (3107k kernel code, 135432k reserved, 1751k data, 328k init) Calibrating delay using timer specific routine.. 4657.58 BogoMIPS (lpj=2328791) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 20781232 Detected 20.781 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4654.98 BogoMIPS (lpj=2327490) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f8000000 - f90fffff ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Device [LPT] status [00000008]: functional but not present; setting present ACPI: Device [ECP] status [00000008]: functional but not present; setting present ACPI: Device [COM2] status [00000008]: functional but not present; setting present ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 11 12 14 15) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:01.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.4 PCI: Cannot allocate resource region 2 of device 0000:00:02.0 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. pnp: 00:03: iomem range 0xfec00000-0xfecfffff could not be reserved pnp: 00:03: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:03: iomem range 0xf8000000-0xfbffffff could not be reserved pnp: 00:03: iomem range 0xfed19000-0xfed19fff has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 12582912 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered Simple Boot Flag at 0x43 set to 0x1 Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] Marking TSC unstable due to possible TSC halt in C2 Time: hpet clocksource has been installed. Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) tpm_tis 00:01: Unable to request irq: 8 for probe Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x1c90 (irq = 17) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ahci 0000:00:1f.2: version 2.3 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: nr_ports (6) and implemented port map (0xf) don't match ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc2000063a100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata2: SATA max UDMA/133 cmd 0xffffc2000063a180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata3: SATA max UDMA/133 cmd 0xffffc2000063a200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata4: SATA max UDMA/133 cmd 0xffffc2000063a280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: ST380815AS, 3.AAA, max UDMA/133 ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: Optiarc DVD-ROM DDU1671S, 1.81, max UDMA/33 ata2.00: applying bridge limits ata2.00: configured for UDMA/33 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: WDC WD5000AAKS-65YGA0, 12.01C02, max UDMA/133 ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM Optiarc DVD-ROM DDU1671S 1.81 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 3:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg2 type 0 Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.05 ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt 0000:00:1a.7[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf03a3000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf03a3400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 20, io base 0x000018a0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018c0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018e0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-1 Fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 328k freed Intel(R) PRO/1000 Network Driver - version 7.6.12 Copyright (c) 1999-2007 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:99:13:ca:4f e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection EXT3 FS on sdb3, internal journal Adding 2000084k swap on /dev/sdb2. Priority:-1 extents:1 across:2000084k dmesg with 8 GB: Linux version 2.6.23.9 (root@adira) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #2 SMP Sat Dec 1 23:07:18 CET 2007 Command line: root=/dev/sdb3 udev pci=nommconf BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df5c0000 (usable) BIOS-e820: 00000000df5c0000 - 00000000df5c8000 (ACPI data) BIOS-e820: 00000000df5c8000 - 00000000df5cb000 (ACPI NVS) BIOS-e820: 00000000df5cb000 - 00000000df700000 (reserved) BIOS-e820: 00000000df800000 - 00000000e0100000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000021a000000 (usable) BIOS-e820: 000000021a000000 - 000000021c000000 (reserved) Entering add_active_range(0, 0, 156) 0 entries of 3200 used Entering add_active_range(0, 256, 914880) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2203648) 2 entries of 3200 used end_pfn_map = 2211840 DMI present. ACPI: RSDP 000F7240, 0014 (r0 PTLTD ) ACPI: RSDT DF5C2D9F, 0058 (r1 PTLTD RSDT 60000 LTP 0) ACPI: FACP DF5C7AF3, 0074 (r1 FSC 60000 F4240) ACPI: DSDT DF5C2DF7, 4CFC (r1 FSC D2587/A1 60000 MSFT 3000001) ACPI: FACS DF5CAFC0, 0040 ACPI: TCPA DF5C7B67, 0032 (r1 Phoeni x 60000 TL 0) ACPI: _MAR DF5C7B99, 0030 (r1 Intel OEMDMAR 60000 LOHR 1) ACPI: SSDT DF5C7BC9, 007A (r1 FSC CST_CPU0 60000 CSF 1) ACPI: SSDT DF5C7C43, 007A (r1 FSC CST_CPU1 60000 CSF 1) ACPI: SSDT DF5C7CBD, 00B6 (r1 FSC PST_CPU0 60000 CSF 1) ACPI: SSDT DF5C7D73, 00B6 (r1 FSC PST_CPU1 60000 CSF 1) ACPI: SPCR DF5C7E29, 0050 (r1 PTLTD $UCRTBL$ 60000 PTL 1) ACPI: MCFG DF5C7E79, 003C (r1 PTLTD MCFG 60000 LTP 0) ACPI: HPET DF5C7EB5, 0038 (r1 PTLTD HPETTBL 60000 LTP 1) ACPI: APIC DF5C7EED, 0068 (r1 PTLTD APIC 60000 LTP 0) ACPI: BOOT DF5C7F55, 0028 (r1 PTLTD $SBFTBL$ 60000 LTP 1) ACPI: ASF! DF5C7F7D, 0083 (r16 CETP CETP 60000 PTL 1) No NUMA configuration found Faking a node at 0000000000000000-000000021a000000 Entering add_active_range(0, 0, 156) 0 entries of 3200 used Entering add_active_range(0, 256, 914880) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2203648) 2 entries of 3200 used Bootmem setup node 0 0000000000000000-000000021a000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2203648 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 156 0: 256 -> 914880 0: 1048576 -> 2203648 On node 0 totalpages: 2069852 DMA zone: 56 pages used for memmap DMA zone: 1460 pages reserved DMA zone: 2480 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 896504 pages, LIFO batch:31 Normal zone: 15792 pages used for memmap Normal zone: 1139280 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009c000 - 000000000009d000 swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000 swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000df5c0000 - 00000000df5c8000 swsusp: Registered nosave memory region: 00000000df5c8000 - 00000000df5cb000 swsusp: Registered nosave memory region: 00000000df5cb000 - 00000000df700000 swsusp: Registered nosave memory region: 00000000df700000 - 00000000df800000 swsusp: Registered nosave memory region: 00000000df800000 - 00000000e0100000 swsusp: Registered nosave memory region: 00000000e0100000 - 00000000f8000000 swsusp: Registered nosave memory region: 00000000f8000000 - 00000000fc000000 swsusp: Registered nosave memory region: 00000000fc000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0100000:17f00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 30376 bytes of per cpu data Built 1 zonelists in Zone order. Total pages: 2038264 Policy zone: Normal Kernel command line: root=/dev/sdb3 udev pci=nommconf Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2327.498 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x108b000 - 0x508b000 Memory: 8086532k/8814592k available (3107k kernel code, 192876k reserved, 1751k data, 328k init) Calibrating delay using timer specific routine.. 4657.58 BogoMIPS (lpj=2328790) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 20781223 Detected 20.781 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4654.98 BogoMIPS (lpj=2327491) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Device [LPT] status [00000008]: functional but not present; setting present ACPI: Device [ECP] status [00000008]: functional but not present; setting present ACPI: Device [COM2] status [00000008]: functional but not present; setting present ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 11 12 14 15) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:01.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.4 PCI: Cannot allocate resource region 2 of device 0000:00:02.0 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. pnp: 00:03: iomem range 0xfec00000-0xfecfffff could not be reserved pnp: 00:03: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:03: iomem range 0xf8000000-0xfbffffff could not be reserved pnp: 00:03: iomem range 0xfed19000-0xfed19fff has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 1048576 (order: 12, 25165824 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 1048576 bind 65536) TCP reno registered Simple Boot Flag at 0x43 set to 0x1 Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] Marking TSC unstable due to possible TSC halt in C2 Time: hpet clocksource has been installed. Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) tpm_tis 00:01: Unable to request irq: 8 for probe Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x1c90 (irq = 17) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ahci 0000:00:1f.2: version 2.3 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: nr_ports (6) and implemented port map (0xf) don't match ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc2000274e100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata2: SATA max UDMA/133 cmd 0xffffc2000274e180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata3: SATA max UDMA/133 cmd 0xffffc2000274e200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata4: SATA max UDMA/133 cmd 0xffffc2000274e280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 316 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: ST380815AS, 3.AAA, max UDMA/133 ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: Optiarc DVD-ROM DDU1671S, 1.81, max UDMA/33 ata2.00: applying bridge limits ata2.00: configured for UDMA/33 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: WDC WD5000AAKS-65YGA0, 12.01C02, max UDMA/133 ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM Optiarc DVD-ROM DDU1671S 1.81 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 3:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg2 type 0 Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.05 ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt 0000:00:1a.7[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf03a3000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf03a3400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 20, io base 0x000018a0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018c0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018e0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-1 Fixing up Logitech keyboard report descriptor input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 328k freed Intel(R) PRO/1000 Network Driver - version 7.6.12 Copyright (c) 1999-2007 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:99:13:ca:4f e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection EXT3 FS on sdb3, internal journal VFS: Can't find ext3 filesystem on dev sdb4. Adding 2000084k swap on /dev/sdb2. Priority:-1 extents:1 across:2000084k ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready lspci: 00:00.0 Host bridge: Intel Corporation DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation PCI Express Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Integrated Graphics Controller (rev 02) 00:03.0 Communication controller: Intel Corporation MEI Controller (rev 02) 00:03.2 IDE interface: Intel Corporation PT IDER Controller (rev 02) 00:03.3 Serial controller: Intel Corporation Serial KT Controller (rev 02) 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02) 00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/