Received-SPF: pass (google.com: domain of linux-kernel+bounces-8802-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
Date: Thu, 21 Dec 2023 18:55:17 +0200
From: Andy Shevchenko <andriy.shevchenko@intel.com>
To: Hugo Villeneuve <hugo@hugovil.com>
Cc: gregkh@linuxfoundation.org, jirislaby@kernel.org, jringle@gridpoint.com,
	kubakici@wp.pl, phil@raspberrypi.org, linux-kernel@vger.kernel.org,
	linux-serial@vger.kernel.org,
	Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: Re: [PATCH 09/18] serial: sc16is7xx: add macro for max number of
 UART ports
Message-ID: <ZYRt9QDnZFozRJRD@smile.fi.intel.com>
References: <20231219171903.3530985-1-hugo@hugovil.com>
 <20231219171903.3530985-10-hugo@hugovil.com>
 <ZYMNSqFgAhId-lQ2@smile.fi.intel.com>
 <20231221114103.557409e9875a0f2f95eacfb6@hugovil.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20231221114103.557409e9875a0f2f95eacfb6@hugovil.com>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo

On Thu, Dec 21, 2023 at 11:41:03AM -0500, Hugo Villeneuve wrote:
> On Wed, 20 Dec 2023 17:50:34 +0200
> Andy Shevchenko <andriy.shevchenko@intel.com> wrote:
> > On Tue, Dec 19, 2023 at 12:18:53PM -0500, Hugo Villeneuve wrote:

...

> > > -	if (count < 0 || count > ARRAY_SIZE(irda_port))
> > > +	if (count < 0 || count > SC16IS7XX_MAX_PORTS)
> > 
> > ARRAY_SIZE() is more robust than this. What if you change to support different
> > devices where this won't be as defined?
> 
> not sure that I understand your point, because SC16IS7XX_MAX_PORTS is
> the maximum for all devices supported by this driver. The irda_port
> array always has a fixed number of elements set to SC16IS7XX_MAX_PORTS,
> even if the device that we are probing has only one port for example.

For current models of the device, yes. Who knows the future?
Also, ARRAY_SIZE() make it less points to update if ever needed.

> But I can change it back to ARRAY_SIZE(irda_port) if you want.

Please change it back.

> > >  		return;

...

> > > +	WARN_ON(devtype->nr_uart > SC16IS7XX_MAX_PORTS);
> > 
> > Not sure about this, perhaps it's fine.
> 
> This check is only there if we add support for a new device and we
> incorrectly set nr_uart to an incorrect value, which will cause other
> problems anyway, of course :)
> 
> This could be removed.

Let's remove. We can add it back in case something like this (quite unlikely)
happens.

-- 
With Best Regards,
Andy Shevchenko