Received-SPF: pass (google.com: domain of linux-kernel+bounces-9646-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Jerome Brunet <jbrunet@baylibre.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	=?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org,
	linux-pwm@vger.kernel.org,
	JunYi Zhao <junyi.zhao@amlogic.com>
Subject: [PATCH v4 0/6] pwm: meson: dt-bindings fixup
Date: Fri, 22 Dec 2023 12:16:48 +0100
Message-ID: <20231222111658.832167-1-jbrunet@baylibre.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

This patchset aims to:
* Fix the incorrect bindings for the s4 type of pwm that was introduced
  while converting the documentation from txt to yaml format.
* Introduce a new compatible for the existing PWMs to better describe the
  HW in DT, instead of describing driver settings.
* Make the introduction of a new pwm variant (s4) slightly easier.

Changes since v3 [3]:
 * Split first rework patch into 3 changes
 * Use dev_warn_once() to notify use of obsolete bindings
 * Rebased on Uwe dev_err_probe() change.

Changes since v2 [2]:
* Drop DTS changes. These will be re-submitted later on. Possibly after
  u-boot gets support for the new compatible to minimise conversion
  problems.
* Position deprecated property correctly in dt-bindings for the old
  meson8 type pwm bindings
* Reword commit description of patch #2 to make more obvious it does not
  introduce a new HW support but fixes a bad bindings.
* Dropped Rob's Reviewed-by on patch #2. It seemed appropriate considering
  the discussion on this change.

Changes since v1 [1]:
* Fix typo in the new binding compatible documentation
* Disallow clock-names for the new compatibles in the schema documenation

[1]: https://lore.kernel.org/linux-amlogic/20231106103259.703417-1-jbrunet@baylibre.com
[2]: https://lore.kernel.org/linux-amlogic/20231117125919.1696980-1-jbrunet@baylibre.com
[3]: https://lore.kernel.org/linux-amlogic/20231129134004.3642121-1-jbrunet@baylibre.com

Jerome Brunet (6):
  dt-bindings: pwm: amlogic: fix s4 bindings
  dt-bindings: pwm: amlogic: add new compatible for meson8 pwm type
  pwm: meson: generalize 4 inputs clock on meson8 pwm type
  pwm: meson: use device data to carry information around
  pwm: meson: don't carry internal clock elements around
  pwm: meson: add generic compatible for meson8 to sm1

 .../devicetree/bindings/pwm/pwm-amlogic.yaml  | 113 ++++++-
 drivers/pwm/pwm-meson.c                       | 291 +++++++++++-------
 2 files changed, 276 insertions(+), 128 deletions(-)

-- 
2.42.0