Received-SPF: pass (google.com: domain of linux-kernel+bounces-12471-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Alex Soo <yuklin.soo@starfivetech.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Adrian Hunter
	<adrian.hunter@intel.com>, Yangtao Li <frank.li@vivo.com>, Andy Shevchenko
	<andriy.shevchenko@linux.intel.com>, Linus Walleij
	<linus.walleij@linaro.org>, Rob Herring <robh+dt@kernel.org>, "Krzysztof
 Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley
	<conor+dt@kernel.org>, Emil Renner Berthing <kernel@esmil.dk>
CC: <linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-riscv@lists.infradead.org>, "Paul
 Walmsley" <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>, Alex Soo <yuklin.soo@starfivetech.com>
Subject: [PATCH 3/3] riscv: dts: starfive: jh8100: Add SD/eMMC device tree nodes
Date: Thu, 28 Dec 2023 14:53:22 +0800
Message-ID: <20231228065322.1176351-4-yuklin.soo@starfivetech.com>
In-Reply-To: <20231228065322.1176351-1-yuklin.soo@starfivetech.com>
References: <20231228065322.1176351-1-yuklin.soo@starfivetech.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable

Add SD/eMMC device tree nodes.

Signed-off-by: Alex Soo <yuklin.soo@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh8100.dtsi | 34 ++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh8100.dtsi b/arch/riscv/boot/d=
ts/starfive/jh8100.dtsi
index 9c8ca73fffe0..545109ca6c49 100644
--- a/arch/riscv/boot/dts/starfive/jh8100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh8100.dtsi
@@ -484,6 +484,15 @@ syscrg_sw: syscrg_sw@12720000 {
 			#reset-cells =3D <1>;
 		};
=20
+		sd1: mmc@12740000 {
+			compatible =3D "starfive,jh8100-sd6hc", "cdns,sd6hc";
+			reg =3D <0x0 0x12740000 0x0 0x10000>;
+			interrupts =3D <91>;
+			bus-width =3D <4>;
+			cap-sd-highspeed;
+			status =3D "disabled";
+		};
+
 		pinctrl_gmac: pinctrl@12770000 {
 			compatible =3D "starfive,jh8100-sys-pinctrl-gmac",
 				     "syscon", "simple-mfd";
@@ -509,6 +518,31 @@ uart6: serial@127e0000  {
 			status =3D "disabled";
 		};
=20
+		emmc: mmc@1f110000 {
+			compatible =3D "starfive,jh8100-sd6hc", "cdns,sd6hc";
+			reg =3D <0x0 0x1f110000 0x0 0x10000>;
+			interrupts =3D <174>;
+			clock-names =3D "main", "sdmclk";
+			clocks =3D <&aoncrg AONCRG_CLK_EMMC_ICG_EN>,
+				 <&aoncrg AONCRG_CLK_EMMC_SDMCLK>;
+			resets =3D <&aoncrg AONCRG_RSTN_EMMC>;
+			bus-width =3D <8>;
+			status =3D "disabled";
+		};
+
+		sd0: mmc@1f120000 {
+			compatible =3D "starfive,jh8100-sd6hc", "cdns,sd6hc";
+			reg =3D <0x0 0x1f120000 0x0 0x10000>;
+			interrupts =3D <175>;
+			clock-names =3D "main", "sdmclk";
+			clocks =3D <&aoncrg AONCRG_CLK_SDIO0_ICG_EN>,
+				 <&aoncrg AONCRG_CLK_SDIO0_SDMCLK>;
+			resets =3D <&aoncrg AONCRG_RSTN_SDIO0>;
+			bus-width =3D <4>;
+			cap-sd-highspeed;
+			status =3D "disabled";
+		};
+
 		pinctrl_aon: pinctrl@1f300000 {
 			compatible =3D "starfive,jh8100-aon-pinctrl",
 				     "syscon", "simple-mfd";
--=20
2.25.1