Received-SPF: pass (google.com: domain of linux-kernel+bounces-12655-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Tudor Ambarus <tudor.ambarus@linaro.org>
To: peter.griffin@linaro.org,
	robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org,
	mturquette@baylibre.com,
	sboyd@kernel.org,
	conor+dt@kernel.org,
	andi.shyti@kernel.org,
	alim.akhtar@samsung.com,
	gregkh@linuxfoundation.org,
	jirislaby@kernel.org,
	s.nawrocki@samsung.com,
	tomasz.figa@gmail.com,
	cw00.choi@samsung.com,
	arnd@arndb.de,
	semen.protsenko@linaro.org
Cc: andre.draszik@linaro.org,
	saravanak@google.com,
	willmcvicker@google.com,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org,
	linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-i2c@vger.kernel.org,
	linux-serial@vger.kernel.org,
	kernel-team@android.com,
	Tudor Ambarus <tudor.ambarus@linaro.org>
Subject: [PATCH v2 10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
Date: Thu, 28 Dec 2023 12:58:03 +0000
Message-ID: <20231228125805.661725-11-tudor.ambarus@linaro.org>
In-Reply-To: <20231228125805.661725-1-tudor.ambarus@linaro.org>
References: <20231228125805.661725-1-tudor.ambarus@linaro.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Get rid of the dummy clock and start using the cmu_peric0 clocks
for the usi_uart and serial_0 nodes.

Tested the serial at 115200, 1000000 and 3000000 baudrates,
everthing went fine.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
v2: identify and use gate clocks instead of divider clocks

 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index c693791ae584..0e5b1b490b0b 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -180,14 +180,6 @@ HERA_CPU_SLEEP: cpu-hera-sleep {
 		};
 	};
 
-	/* TODO replace with CCF clock */
-	dummy_clk: clock-3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12345>;
-		clock-output-names = "pclk";
-	};
-
 	/* ect node is required to be present by bootloader */
 	ect {
 	};
@@ -369,7 +361,8 @@ usi_uart: usi@10a000c0 {
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clocks = <&dummy_clk>, <&dummy_clk>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x1020>;
 			samsung,mode = <USI_V2_UART>;
@@ -380,7 +373,8 @@ serial_0: serial@10a00000 {
 				reg = <0x10a00000 0xc0>;
 				interrupts = <GIC_SPI 634
 					      IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
 				samsung,uart-fifosize = <256>;
 				status = "disabled";
-- 
2.43.0.472.g3155946c3a-goog