Received-SPF: pass (google.com: domain of linux-kernel+bounces-17923-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Christian Marangi <ansuelsmth@gmail.com>
To: Pavel Machek <pavel@ucw.cz>,
	Lee Jones <lee@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	William Zhang <william.zhang@broadcom.com>,
	Anand Gore <anand.gore@broadcom.com>,
	Kursad Oney <kursad.oney@broadcom.com>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	=?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>,
	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	=?UTF-8?q?Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>,
	Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
	Christian Marangi <ansuelsmth@gmail.com>,
	linux-leds@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	netdev@vger.kernel.org
Subject: [net-next PATCH v9 1/5] dt-bindings: net: phy: Make LED active-low property common
Date: Fri,  5 Jan 2024 15:27:13 +0100
Message-ID: <20240105142719.11042-2-ansuelsmth@gmail.com>
In-Reply-To: <20240105142719.11042-1-ansuelsmth@gmail.com>
References: <20240105142719.11042-1-ansuelsmth@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Move LED active-low property to common.yaml. This property is currently
defined multiple times by bcm LEDs. This property will now be supported
in a generic way for PHY LEDs with the use of a generic function.

With active-low bool property not defined, active-high is always
assumed.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v5:
- Make active-low generic
Changes v4:
- Drop support for global active-low
- Rework to polarity option (for marvell10g series support)
Changes v3:
- Out of RFC
Changes v2:
- Add this patch

 Documentation/devicetree/bindings/leds/common.yaml          | 6 ++++++
 Documentation/devicetree/bindings/leds/leds-bcm63138.yaml   | 4 ----
 Documentation/devicetree/bindings/leds/leds-bcm6328.yaml    | 4 ----
 Documentation/devicetree/bindings/leds/leds-bcm6358.txt     | 2 --
 .../devicetree/bindings/leds/leds-pwm-multicolor.yaml       | 4 ----
 Documentation/devicetree/bindings/leds/leds-pwm.yaml        | 5 -----
 6 files changed, 6 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index c8d0ba5f2327..f5b40df6b421 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -200,6 +200,12 @@ properties:
       #trigger-source-cells property in the source node.
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  active-low:
+    type: boolean
+    description:
+      Makes LED active low. To turn the LED ON, line needs to be
+      set to low voltage instead of high.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
index 52252fb6bb32..bb20394fca5c 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -52,10 +52,6 @@ patternProperties:
         maxItems: 1
         description: LED pin number
 
-      active-low:
-        type: boolean
-        description: Makes LED active low
-
     required:
       - reg
 
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
index 51cc0d82c12e..f3a3ef992929 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -78,10 +78,6 @@ patternProperties:
           - maximum: 23
         description: LED pin number (only LEDs 0 to 23 are valid).
 
-      active-low:
-        type: boolean
-        description: Makes LED active low.
-
       brcm,hardware-controlled:
         type: boolean
         description: Makes this LED hardware controlled.
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
index 6e51c6b91ee5..211ffc3c4a20 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -25,8 +25,6 @@ LED sub-node required properties:
 
 LED sub-node optional properties:
   - label : see Documentation/devicetree/bindings/leds/common.txt
-  - active-low : Boolean, makes LED active low.
-    Default : false
   - default-state : see
     Documentation/devicetree/bindings/leds/common.txt
   - linux,default-trigger : see
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
index bd6ec04a8727..5edfbe347341 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -41,10 +41,6 @@ properties:
 
           pwm-names: true
 
-          active-low:
-            description: For PWMs where the LED is wired to supply rather than ground.
-            type: boolean
-
           color: true
 
         required:
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
index 7de6da58be3c..113b7c218303 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -34,11 +34,6 @@ patternProperties:
           Maximum brightness possible for the LED
         $ref: /schemas/types.yaml#/definitions/uint32
 
-      active-low:
-        description:
-          For PWMs where the LED is wired to supply rather than ground.
-        type: boolean
-
     required:
       - pwms
       - max-brightness
-- 
2.43.0