Received-SPF: pass (google.com: domain of linux-kernel+bounces-20253-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Date: Tue, 9 Jan 2024 02:17:28 +0100
From: Andrew Lunn <andrew@lunn.ch>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	William Zhang <william.zhang@broadcom.com>,
	Anand Gore <anand.gore@broadcom.com>,
	Kursad Oney <kursad.oney@broadcom.com>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	=?utf-8?B?UmFmYcWCIE1pxYJlY2tp?= <rafal@milecki.pl>,
	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	=?iso-8859-1?Q?Fern=E1ndez?= Rojas <noltari@gmail.com>,
	Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	netdev@vger.kernel.org
Subject: Re: [net-next PATCH v9 3/5] net: phy: add support for PHY LEDs
 polarity modes
Message-ID: <b7bccef0-570a-4ed9-b349-6d7d0fcc2e2a@lunn.ch>
References: <20240105142719.11042-1-ansuelsmth@gmail.com>
 <20240105142719.11042-4-ansuelsmth@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240105142719.11042-4-ansuelsmth@gmail.com>

On Fri, Jan 05, 2024 at 03:27:15PM +0100, Christian Marangi wrote:
> Add support for PHY LEDs polarity modes. Some PHY require LED to be set
> to active low to be turned ON. Adds support for this by declaring
> active-low property in DT.
> 
> PHY driver needs to declare .led_polarity_set() to configure LED
> polarity modes. Function will pass the index with the LED index and a
> bitmap with all the required modes to set.
> 
> Current supported modes are:
> - active-low with the flag PHY_LED_ACTIVE_LOW. LED is set to active-low
>   to turn it ON.
> - inactive-high-impedance with the flag PHY_LED_INACTIVE_HIGH_IMPEDANCE.
>   LED is set to high impedance to turn it OFF.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew