Received-SPF: pass (google.com: domain of linux-kernel+bounces-22035-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
Message-ID: <4f8aafa2-2145-4090-afba-8a26242d5ac3@linaro.org>
Date: Wed, 10 Jan 2024 12:03:20 +0100
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v3 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI
 definitions
Content-Language: en-US
To: Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
 Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
 Bjorn Andersson <andersson@kernel.org>,
 Mauro Carvalho Chehab <mchehab@kernel.org>, Rob Herring
 <robh+dt@kernel.org>, Krzysztof Kozlowski
 <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20240109-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v3-0-b8e3a74a6e6a@linaro.org>
 <20240109-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v3-3-b8e3a74a6e6a@linaro.org>
From: Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20240109-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v3-3-b8e3a74a6e6a@linaro.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit


On 1/9/24 17:06, Bryan O'Donoghue wrote:
> sc8280xp has four Camera Control Interface (CCI) blocks which pinout to
> two I2C master controllers for each CCI.
> 
> The CCI I2C pins are not muxed so we define them in the dtsi.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 307 +++++++++++++++++++++++++++++++++
>   1 file changed, 307 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index febf28356ff8..f48dfa5e5f36 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3451,6 +3451,169 @@ usb_1_role_switch: endpoint {
>   			};
>   		};
>   
> +		cci0: cci@ac4a000 {
> +			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
> +			reg = <0 0x0ac4a000 0 0x1000>;
> +
> +			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
> +
> +			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
> +				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
> +				 <&camcc CAMCC_CPAS_AHB_CLK>,
> +				 <&camcc CAMCC_CCI_0_CLK>;
> +			clock-names = "camnoc_axi",
> +				      "slow_ahb_src",
> +				      "cpas_ahb",
> +				      "cci";
> +
> +			power-domains = <&camcc TITAN_TOP_GDSC>;
> +
> +			pinctrl-names = "default", "sleep";
> +			pinctrl-0 = <&cci0_default>;
> +			pinctrl-1 = <&cci0_sleep>;
> +
property-names goes below property-n, just like with clocks 10 lines
above :/

other than that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad