Received-SPF: pass (google.com: domain of linux-kernel+bounces-22110-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Luo Jie <quic_luoj@quicinc.com>
To: <agross@kernel.org>, <andersson@kernel.org>, <konrad.dybcio@linaro.org>,
        <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
        <pabeni@redhat.com>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
        <corbet@lwn.net>, <catalin.marinas@arm.com>, <will@kernel.org>,
        <p.zabel@pengutronix.de>, <linux@armlinux.org.uk>,
        <shannon.nelson@amd.com>, <anthony.l.nguyen@intel.com>,
        <jasowang@redhat.com>, <brett.creeley@amd.com>,
        <rrameshbabu@nvidia.com>, <joshua.a.hay@intel.com>, <arnd@arndb.de>,
        <geert+renesas@glider.be>, <neil.armstrong@linaro.org>,
        <dmitry.baryshkov@linaro.org>, <nfraprado@collabora.com>,
        <m.szyprowski@samsung.com>, <u-kumar1@ti.com>,
        <jacob.e.keller@intel.com>, <andrew@lunn.ch>
CC: <netdev@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-doc@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>,
        <ryazanov.s.a@gmail.com>, <ansuelsmth@gmail.com>,
        <quic_kkumarcs@quicinc.com>, <quic_suruchia@quicinc.com>,
        <quic_soni@quicinc.com>, <quic_pavir@quicinc.com>,
        <quic_souravp@quicinc.com>, <quic_linchen@quicinc.com>,
        <quic_leiwei@quicinc.com>
Subject: [PATCH net-next 01/20] Documentation: networking: qcom PPE driver documentation
Date: Wed, 10 Jan 2024 19:40:13 +0800
Message-ID: <20240110114033.32575-2-quic_luoj@quicinc.com>
In-Reply-To: <20240110114033.32575-1-quic_luoj@quicinc.com>
References: <20240110114033.32575-1-quic_luoj@quicinc.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

From: Lei Wei <quic_leiwei@quicinc.com>

Add Qualcomm PPE driver documentation

Signed-off-by: Lei Wei <quic_leiwei@quicinc.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 .../device_drivers/ethernet/index.rst         |   1 +
 .../ethernet/qualcomm/ppe/ppe.rst             | 305 ++++++++++++++++++
 2 files changed, 306 insertions(+)
 create mode 100644 Documentation/networking/device_drivers/ethernet/qualcomm/ppe/ppe.rst

diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst
index 43de285b8a92..fff37383f995 100644
--- a/Documentation/networking/device_drivers/ethernet/index.rst
+++ b/Documentation/networking/device_drivers/ethernet/index.rst
@@ -47,6 +47,7 @@ Contents:
    neterion/s2io
    netronome/nfp
    pensando/ionic
+   qualcomm/ppe/ppe
    smsc/smc9
    stmicro/stmmac
    ti/cpsw
diff --git a/Documentation/networking/device_drivers/ethernet/qualcomm/ppe/ppe.rst b/Documentation/networking/device_drivers/ethernet/qualcomm/ppe/ppe.rst
new file mode 100644
index 000000000000..0f728a178ee7
--- /dev/null
+++ b/Documentation/networking/device_drivers/ethernet/qualcomm/ppe/ppe.rst
@@ -0,0 +1,305 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================================
+PPE Driver for Qualcomm PPE Ethernet Network Family
+===================================================
+
+Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+
+Author: Lei Wei <quic_leiwei@quicinc.com>
+
+
+Contents
+========
+
+- `Overview`_
+- `PPE Driver Supported SoCs`_
+- `Enabling the Driver`_
+- `Supported Features`_
+- `PPE MAC and UNIPHY Interface`_
+- `Debugging`_
+- `APIs used by PPE EDMA driver`_
+- `Exported PPE Device Operations`_
+
+
+Overview
+========
+
+This file describes the Qualcomm PPE (Packet Process Engine) driver.
+
+PPE Architecture
+----------------
+
+PPE supports maximum 6 MACs (GMACs or XGMACs) which are connected with 6 PHYs through 3 UNIPHYs,
+the 6 PHYs correspond to 6 Panel ethernet ports from port1 to port6. Some IPQ platforms will have
+less than 6 MACs and 3 UNIPHYs.
+
+PPE supports to forward the ingress packets to EDMA network driver through intenal cpu port0. It
+also supports to forward packets between the PPE ports.
+
+A simplified example view of the PPE interfaces with PHYs and net devices::
+
+   +--------+ +--------+ +--------+ +--------+ +--------+   +--------+    start/stop   +---------+
+   | netdev | | netdev | | netdev | | netdev | | netdev |   | netdev | <-------------- |         |
+   +--------+ +--------+ +--------+ +--------+ +--------+   +--------+                 |         |
+                                |                                                      |         |
+                                P0                                                     |         |
+                                |                                                      |         |
+ +-------------------------------------------------------------------------+           |         |
+ |                                                                         |           |         |
+ |                        PPE(packet process engine)                       |           |         |
+ |                                                                         |           |         |
+ |                                                                         |           |         |
+ |    +------+ +------+ +------+ +------+    +------+       +------+       |  mac ops  | phylink |
+ |    | MAC0 | | MAC1 | | MAC2 | | MAC3 |    | MAC4 |       | MAC5 |       | <-------- |         |
+ |    +------+ +------+ +------+ +------+    +------+       +------+       |           |         |
+ |       |        |        |        |           |              |           |           |         |
+ +-------------------------------------------------------------------------+           |         |
+         |        |        |        |           |              |                       |         |
+      +-------------------------------+  +-------------+ +-------------+               |         |
+      |        [ QSGMII ]             |  | [ USXGMII ] | | [ USXGMII ] |    pcs ops    |         |
+      |         UNIPHY0               |  |   UNIPHY1   | |   UNIPHY2   | <------------ |         |
+      |                               |  |             | |             |               |         |
+      +-------------------------------+  +-------------+ +-------------+               |         |
+         |        |        |        |           |             |                        |         |
+  +----------------------------------------------------------------------+             |         |
+  |   +------+ +------+ +------+ +------+    +------+      +------+      | link change |         |
+  |   | PHY0 | | PHY1 | | PHY2 | | PHY3 |    | PHY4 |      | PHY5 |      | ----------> |         |
+  |   +------+ +------+ +------+ +------+    +------+      +------+      |             |         |
+  |      |        |        |        |           |             | MDIO bus |             |         |
+  +----------------------------------------------------------------------+             +---------+
+         |         |       |        |           |             |
+         P1        P2      P3       P4          P5            P6
+
+
+PPE Driver Overview
+-------------------
+
+PPE driver is the PPE platform driver which executes the initialization of the PPE
+hardware including the PPE clock, Queue management, Buffer management, TDM,
+scheduler, RSS, MAC and UNIPHY.
+
+PPE driver provides PPE MAC and UNIPHY PCS operations for PHYLINK. It also exports
+a set of PPE operations. These operations can be used by network driver to drive
+PPE.
+
+PPE driver exports functions to get the PPE device and PPE device operations. Other
+network drivers such as PPE EDMA network driver can use the exported functions to
+get the PPE device and PPE device operations.
+
+PPE driver provides debugfs file to get the PPE packet counters. These packet counters
+include port Rx and Tx counters, CPU code counters and queue counters.
+
+
+PPE Driver Supported SoCs
+=========================
+
+The PPE drivers enable the PPE engine present on the following SoCs:
+
+- IPQ9574
+- IPQ5332
+
+
+Enabling the Driver
+===================
+
+The driver is enabled automatically by the network driver which depends on it such as
+Qualcomm EDMA driver.
+
+The driver is located in the menu structure at:
+
+  -> Device Drivers
+    -> Network device support (NETDEVICES [=y])
+      -> Ethernet driver support
+        -> Qualcomm devices
+          -> Qualcomm Technologies, Inc. PPE Ethernet support
+
+If this driver is built as a module, we can use below commands to install and remove
+it:
+
+- insmod qcom-ppe.ko
+- rmmod qcom-ppe.ko
+
+Please note that this driver should be installed before the Qualcomm EDMA driver
+and removed after the Qualcomm EDMA driver if it is built as a module.
+
+
+Supported Features
+==================
+
+PPE Interface mode - SGMII, 2500BASEX, USXGMII, 10GBASER, QSGMII and QUSGMII.
+
+PPE port link speed from 10Mbps to 10000Mbps.
+
+PPE Packets forwarding and offloading.
+
+PPE RSS.
+
+PPE Buffer Manager.
+
+PPE Queues Manager and Scheduler.
+
+
+PPE MAC and UNIPHY Interface
+============================
+
+PPE MAC and UNIPHY supports various interface mode including SGMII, 2500BASEX, USXGMII,
+10GBASER, QSGMII and QUSGMII. A various link including external PHY mode, 2.5G fixed
+link mode and 10G SFP mode are also supported.
+
+PPE driver provides two phylink ops functions to PPE EDMA network driver to setup and
+destroy phylink for each PPE ports. EDMA neworking driver will setup the phylink when
+each net device created and destroy the phylink when each net device removed.
+
+ - .phylink_setup() will lookup the PPE port device tree for PHYLINK-compatible of
+   binding (phy-handle) and create and return a PHYLINK instance associated with the
+   received net device for each port.
+
+ - .phylink_destroy() will disconnect and destroy the PHYLINK instance for each port.
+
+The PPE phylink MAC ops and UNIPHY PCS ops functions are implemented in the PPE driver
+to drive PPE MAC and UNIPHY to interact with PHYLINK framework.
+
+
+Debugging
+=========
+
+PPE packet counters can be checked by debugfs file ``/sys/kernel/debug/ppe/packet_counter``.
+
+PPE MAC statistics can be checked by ``ethtool -S ethX``.
+
+PPE UNIPHY clock and PPE port clock rate can be checked by the clock debugfs file
+in ``/sys/kernel/debug/clk/``.
+
+PPE port link state and PHY features can be also checked by ``ethtool ethX``.
+
+The SFP module state can be checked by the debugfs file in ``/sys/kernel/debug/@sfp/state``,
+where the ``@sfp`` is the SFP DTS node name.
+
+
+APIs used by PPE EDMA driver
+============================
+
+PPE driver also exports a set of APIs. Whether PPE driver have been probed can be
+checked by below API, the PPE EDMA driver uses it to query and ascertain that the
+PPE driver is installed and probed before going ahead with its initialization.
+::
+
+	bool ppe_is_probed(struct platform_device *pdev);
+
+PPE driver private PPE device structure can be got by below API::
+
+	struct ppe_device *ppe_dev_get(struct platform_device *pdev);
+
+PPE device operations pointer can be got by below API::
+
+	struct ppe_device_ops *ppe_ops_get(struct platform_device *pdev);
+
+Above APIs are exported and also declared in the common ppe header file in
+"include/linux/soc/qcom/ppe.h". The network driver which wants to drive PPE
+can include this header file and get the PPE device structure by exported
+"ppe_dev_get" API, and get the PPE device operations by exported
+"ppe_ops_get" API.
+
+PPE queue configuration operations pointer can be got by below API::
+
+	const struct ppe_queue_ops *ppe_queue_config_ops_get(void);
+
+This API is exported and is only used by PPE EDMA driver.
+
+
+Exported PPE Device Operations
+==============================
+
+PPE driver provides a set of PPE device operations to drive the PPE. Higher level
+network drivers such as PPE EDMA ethernet driver or a PPE DSA driver can use these
+operations to drive the PPE. The definitions of these PPE device operations can be
+found in "include/linux/soc/qcom/ppe.h". Below lists these PPE device operations.
+
+phylink_setup::
+
+	.phylink_setup(struct ppe_device *ppe_dev, struct net_device *netdev, int port);
+
+The phylink_setup operation is used by the network driver such as PPE EDMA driver to
+create PHYLINK when creating net device. This operation takes net device and the PPE
+port id as input parameters, PPE driver will create and return a PHYLINK instance
+associated with the net device and port.
+
+phylink_destroy::
+
+	.phylink_destroy(struct ppe_device *ppe_dev, int port);
+
+The phylink_destroy operation is used by the network driver such as PPE EDMA driver
+to destroy the PHYLINK.
+
+phylink_mac_config::
+
+	.phylink_mac_config(struct ppe_device *ppe_dev, int port, unsigned int mode,
+			const struct phylink_link_state *state);
+
+phylink_mac_link_up::
+
+	.phylink_mac_link_up(struct ppe_device *ppe_dev, int port, struct phy_device *phy,
+			unsigned int mode, phy_interface_t interface, int speed, int duplex,
+			bool tx_pause, bool rx_pause);
+
+phylink_mac_link_down::
+
+	.phylink_mac_link_down(struct ppe_device *ppe_dev, int port,  unsigned int mode,
+			phy_interface_t interface);
+
+phylink_mac_select_pcs::
+
+	.phylink_mac_select_pcs(struct ppe_device *ppe_dev, int port,
+			phy_interface_t interface);
+
+Above PHYLINK MAC operations are used by the network driver which creates the PHYLINK and
+provides the PHYLINK MAC ops such as PPE DSA driver. In the network driver PHYLINK MAC ops,
+it can use above PPE PHYLINK MAC operations to drive the PPE MAC for PHYLINK.
+
+get_stats64::
+
+	.get_stats64(struct ppe_device *ppe_dev, int port, struct rtnl_link_stats64 *s);
+
+This operation is used by PPE network driver to get the PPE MAC statistics, for example
+used in network driver net device ops.
+
+get_strings::
+
+	.get_strings(struct ppe_device *ppe_dev, int port, u32 stringset, u8 *data);
+
+get_sset_count::
+
+	.get_sset_count(struct ppe_device *ppe_dev, int port, int sset);
+
+get_ethtool_stats::
+
+	.get_ethtool_stats(struct ppe_device *ppe_dev, int port, u64 *data);
+
+Above operations are used by PPE network driver to show PPE MAC statistics, for example
+used in network driver ethtool ops.
+
+set_mac_address::
+
+	.set_mac_address(struct ppe_device *ppe_dev, int port, u8 *macaddr);
+
+This operation is used by PPE network driver to set the PPE MAC address, for example
+used in network driver net device ops.
+
+set_mac_eee::
+
+	.set_mac_eee(struct ppe_device *ppe_dev, int port, struct ethtool_eee *eee);
+
+get_mac_eee::
+
+	.get_mac_eee(struct ppe_device *ppe_dev, int port, struct ethtool_eee *eee);
+
+Above operations are used by PPE network driver to set and get the PPE MAC eee, for example
+used in network driver ethtool ops.
+
+set_maxframe::
+
+	.set_maxframe(struct ppe_device *ppe_dev, int port, int maxframe_size);
+
+This operation is used by PPE network driver to set the PPE port maximum frame size, for
+example used in network net device ops.
-- 
2.42.0