Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964823AbXLNA2i (ORCPT ); Thu, 13 Dec 2007 19:28:38 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1765248AbXLNA21 (ORCPT ); Thu, 13 Dec 2007 19:28:27 -0500 Received: from mail3.key-systems.net ([81.3.43.213]:35694 "HELO mail3.key-systems.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1764435AbXLNA2Y (ORCPT ); Thu, 13 Dec 2007 19:28:24 -0500 X-Greylist: delayed 399 seconds by postgrey-1.27 at vger.kernel.org; Thu, 13 Dec 2007 19:28:23 EST Subject: Strange ATA problems From: Christoph Anton Mitterer To: linux-kernel@vger.kernel.org Content-Type: multipart/signed; micalg=sha1; protocol="application/x-pkcs7-signature"; boundary="=-Dm3iS718mObcR+7kUU44" Date: Fri, 14 Dec 2007 01:21:39 +0100 Message-Id: <1197591699.3453.38.camel@fermat.scientia.net> Mime-Version: 1.0 X-Mailer: Evolution 2.12.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 43283 Lines: 915 --=-Dm3iS718mObcR+7kUU44 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi everybody. Today I've experienced a very strange problem. I have a CD/DVD drive connected via USB,... and while woking the system suddenly freezed (at least those processes that tried to access the hardsisk). Looking at dmesg it showed me this: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK3] -> GSI 18 (level, high) -> IRQ 18 PCI: Setting latency timer of device 0000:02:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 usb 1-1: new high speed USB device using ehci_hcd and address 5 usb 1-1: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning scsi 6:0:0:0: CD-ROM PLEXTOR DVD-ROM PX-130A 1.03 PQ: 0 ANSI: 0 CCS sr0: scsi3-mmc drive: 0x/50x cd/rw xa/form2 cdda tray sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg3 type 5 usb-storage: device scan complete end_request: I/O error, dev sr0, sector 308688 Buffer I/O error on device sr0, logical block 77172 Buffer I/O error on device sr0, logical block 77173 end_request: I/O error, dev sr0, sector 308688 Buffer I/O error on device sr0, logical block 77172 Buffer I/O error on device sr0, logical block 77173 end_request: I/O error, dev sr0, sector 308816 Buffer I/O error on device sr0, logical block 77204 Buffer I/O error on device sr0, logical block 77205 end_request: I/O error, dev sr0, sector 308816 Buffer I/O error on device sr0, logical block 77204 Buffer I/O error on device sr0, logical block 77205 UDF-fs: No VRS found tun0: Disabled Privacy Extensions So I've plugged out the USB connected drive and then those processes continued. Anyway, now I got the following stuff: usb 1-1: USB disconnect, address 5 ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 next cpb idx 0x0 ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x2 ata1: timeout waiting for ADMA IDLE, stat=3D0x400 ata1.00: exception Emask 0x0 SAct 0x7ff SErr 0x0 action 0x2 frozen ata1.00: cmd 61/10:00:2e:07:a8/01:00:0b:00:00/40 tag 0 cdb 0x0 data 139264 out res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/18:08:07:3f:02/00:00:00:00:00/40 tag 1 cdb 0x0 data 12288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:10:b6:a8:23/00:00:0d:00:00/40 tag 2 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:18:f6:37:68/00:00:0d:00:00/40 tag 3 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:20:9e:32:a1/00:00:0d:00:00/40 tag 4 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:28:4f:00:dc/00:00:02:00:00/40 tag 5 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:30:6f:00:dc/00:00:02:00:00/40 tag 6 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:38:3f:03:2c/00:00:05:00:00/40 tag 7 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:40:36:ea:72/00:00:0d:00:00/40 tag 8 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:48:7f:00:c4/00:00:05:00:00/40 tag 9 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:50:47:02:d8/00:00:05:00:00/40 tag 10 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1/sda is my harddisk (at least one of them) What do does errors mean? Is this probably a hardware failure? And how can the CD/DVD problem relate to this? Any ideas? Thanks and best wishes, Christoph Anton Mitterer. total demsg: usb-dib0700.force_lna_activation=3D1 iommu=3Dsoft=20 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b000 (usable) BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000da000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff80000 (usable) BIOS-e820: 000000007ff80000 - 000000007ff91000 (ACPI data) BIOS-e820: 000000007ff91000 - 0000000080000000 (ACPI NVS) BIOS-e820: 0000000080000000 - 000000009ff80000 (usable) BIOS-e820: 000000009ff80000 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000160000000 (usable) Entering add_active_range(0, 0, 155) 0 entries of 3200 used Entering add_active_range(0, 256, 524160) 1 entries of 3200 used Entering add_active_range(0, 524288, 655232) 2 entries of 3200 used Entering add_active_range(0, 1048576, 1441792) 3 entries of 3200 used end_pfn_map =3D 1441792 DMI present. ACPI: RSDP 000F78F0, 0014 (r0 PTLTD ) ACPI: RSDT 7FF8B258, 0038 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 7FF90B06, 0074 (r1 NVIDIA CK8S 6040000 PTL_ F4240) ACPI: DSDT 7FF8B290, 5876 (r1 NVIDIA CK8 6040000 MSFT 100000E) ACPI: FACS 7FF91FC0, 0040 ACPI: SPCR 7FF90B7A, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: APIC 7FF90BCA, 009E (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 7FF90C68, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 7FF90C90, 0370 (r1 PTLTD POWERNOW 6040000 LTP 1) Scanning NUMA topology in Northbridge 24 CPU has 2 num_cores Number of nodes 2 Node 0 using interleaving mode 1/0 No NUMA configuration found Faking a node at 0000000000000000-0000000160000000 Entering add_active_range(0, 0, 155) 0 entries of 3200 used Entering add_active_range(0, 256, 524160) 1 entries of 3200 used Entering add_active_range(0, 524288, 655232) 2 entries of 3200 used Entering add_active_range(0, 1048576, 1441792) 3 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000160000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1441792 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0 -> 155 0: 256 -> 524160 0: 524288 -> 655232 0: 1048576 -> 1441792 On node 0 totalpages: 1048219 DMA zone: 56 pages used for memmap DMA zone: 1368 pages reserved DMA zone: 2571 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 636728 pages, LIFO batch:31 Normal zone: 5376 pages used for memmap Normal zone: 387840 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xd0000000] gsi_base[24]) IOAPIC[1]: apic_id 5, address 0xd0000000, GSI 24-27 ACPI: IOAPIC (id[0x06] address[0xd0001000] gsi_base[28]) IOAPIC[2]: apic_id 6, address 0xd0001000, GSI 28-31 ACPI: IOAPIC (id[0x07] address[0xd0800000] gsi_base[32]) IOAPIC[3]: apic_id 7, address 0xd0800000, GSI 32-55 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at a4000000 (gap: a0000000:40000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 30120 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 1027139 Policy zone: Normal Kernel command line: root=3D/dev/sda1 ro mce=3Dbootlog snd-ice1724.index=3D= 0 snd-intel8x0.index=3D1 snd-intel8x0.ac97_quirk=3Dhp_only dvb-usb-dib0700.force_lna_activation=3D1 iommu=3Dsoft=20 Unknown boot option `dvb-usb-dib0700.force_lna_activation=3D1': ignoring Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2210.196 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... CPU 0: aperture @ ac000000 size 64 MB CPU 1: aperture @ ac000000 size 64 MB PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x104f000 - 0x504f000 Memory: 4042276k/5767168k available (3210k kernel code, 150600k reserved, 1430k data, 300k init) Calibrating delay using timer specific routine.. 4421.73 BogoMIPS (lpj=3D2210867) Security Framework v1.0.0 initialized Capability LSM initialized Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12557933 Detected 12.557 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4419.72 BogoMIPS (lpj=3D2209861) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Dual Core AMD Opteron(tm) Processor 275 stepping 02 SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 4419.73 BogoMIPS (lpj=3D2209865) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/2 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 Dual Core AMD Opteron(tm) Processor 275 stepping 02 SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 4419.72 BogoMIPS (lpj=3D2209861) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 Dual Core AMD Opteron(tm) Processor 275 stepping 02 Brought up 4 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Root Bridge [PCI2] (0000:10) ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT] ACPI: PCI Root Bridge [PCI1] (0000:80) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LSI1] (IRQs 52 53 54 55) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a report pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be reserved pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:00: iomem range 0xfefff000-0xfeffffff has been reserved pnp: 00:02: ioport range 0x8000-0x807f has been reserved pnp: 00:02: ioport range 0x8080-0x80ff has been reserved pnp: 00:02: ioport range 0x8400-0x847f has been reserved pnp: 00:02: ioport range 0x8480-0x84ff has been reserved pnp: 00:02: ioport range 0x8800-0x887f has been reserved pnp: 00:02: ioport range 0x8880-0x88ff has been reserved pnp: 00:02: ioport range 0xa000-0xa03f has been reserved pnp: 00:02: ioport range 0xa040-0xa07f has been reserved PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: b0100000-b01fffff PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:02:00.0 PCI: Bridge: 0000:00:0e.0 IO window: 2000-2fff MEM window: b1000000-b2ffffff PREFETCH window: c0000000-cfffffff Time: acpi_pm clocksource has been installed. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:10:0a.0 IO window: 3000-3fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:0b.0 IO window: 4000-4fff MEM window: d0100000-d05fffff PREFETCH window: a4000000-a41fffff PCI: Bridge: 0000:80:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:80:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 12582912 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1197561911.480:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 Boot video device is 0000:02:00.0 PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:10:0a.0 subordinate bus. AMD8131 rev 12 detected, disabling PCI-X MMRBC PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:10:0b.0 subordinate bus. AMD8131 rev 12 detected, disabling PCI-X MMRBC PCI: Found disabled HT MSI Mapping on 0000:80:0e.0 PCI: Found enabled HT MSI Mapping on 0000:80:00.0 PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:80:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:80:0e.0:pcie00] input: Power Button (FF) as /devices/virtual/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/virtual/input/input1 ACPI: Power Button (CM) [PWRB] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded nbd: registered device at major 43 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 010f1:2895 bound to 0000:00:0a.0 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 55 ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LMAC] -> GSI 55 (level, high) -> IRQ 55 PCI: Setting latency timer of device 0000:80:0a.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 010f1:2895 bound to 0000:80:0a.0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Linux video capture interface: v2.00 pwc: Philips webcam module version 10.0.13 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. usbcore: registered new interface driver Philips webcam Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3Dxx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: Hitachi HDT725025VLAT80, ATA DISK drive hdb: PLEXTOR DVDR PX-760A, ATAPI CD/DVD-ROM drive hda: selected mode 0x46 hdb: selected mode 0x44 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 512KiB hda: 488397168 sectors (250059 MB) w/7372KiB Cache, CHS=3D30401/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, high) -> IRQ 22 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xffffc2000143a480 ctl 0xffffc2000143a4a0 bmdma 0x0000000000011c10 irq 22 ata2: SATA max UDMA/133 cmd 0xffffc2000143a580 ctl 0xffffc2000143a5a0 bmdma 0x0000000000011c18 irq 22 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: HDT722525DLA380, V44OA80A, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: HDT722525DLA380, V44OA80A, max UDMA/133 ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5 ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5 ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg1 type 0 ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 21 (level, high) -> IRQ 21 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xffffc2000143c480 ctl 0xffffc2000143c4a0 bmdma 0x0000000000011c20 irq 21 ata4: SATA max UDMA/133 cmd 0xffffc2000143c580 ctl 0xffffc2000143c5a0 bmdma 0x0000000000011c28 irq 21 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: ST3750640AS, 3.AAK, max UDMA/133 ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5 ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg2 type 0 Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.05 ACPI: PCI Interrupt 0000:12:06.0[A] -> GSI 30 (level, low) -> IRQ 30 mptbase: Initiating ioc0 bringup ioc0: LSI53C1030 B2: Capabilities=3D{Initiator,Target} scsi4 : ioc0: LSI53C1030 B2, FwRev=3D01032700h, Ports=3D1, MaxQ=3D255, IRQ= =3D30 ACPI: PCI Interrupt 0000:12:06.1[B] -> GSI 31 (level, low) -> IRQ 31 mptbase: Initiating ioc1 bringup ioc1: LSI53C1030 B2: Capabilities=3D{Initiator,Target} scsi5 : ioc1: LSI53C1030 B2, FwRev=3D01032700h, Ports=3D1, MaxQ=3D255, IRQ= =3D31 Fusion MPT misc device (ioctl) driver 3.04.05 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=3D10,220) ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK4] -> GSI 19 (level, high) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[19] MMIO=3D[b0104000-b01047ff] Max Packet=3D[2048] IR/IT contexts=3D[4/8] ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 20, io mem 0xb0001000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt 0000:12:04.2[C] -> GSI 30 (level, low) -> IRQ 30 ehci_hcd 0000:12:04.2: EHCI Host Controller ehci_hcd 0000:12:04.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:12:04.2: irq 30, io mem 0xd0100000 ehci_hcd 0000:12:04.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 23, io mem 0xb0000000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected Initializing USB Mass Storage driver... usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using ohci_hcd and address 2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0810000238d2d] usb 3-2: configuration #1 chosen from 1 choice usb 3-3: new full speed USB device using ohci_hcd and address 3 usb 3-3: configuration #1 chosen from 1 choice pwc: Logitech QuickCam 4000 Pro USB webcam detected. pwc: Registered as /dev/video0. usb 3-4: new full speed USB device using ohci_hcd and address 4 usb 3-4: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input3 i2c /dev entries driver i2c-adapter i2c-0: nForce2 SMBus adapter at 0xa000 i2c-adapter i2c-1: nForce2 SMBus adapter at 0xa040 smsc47b397: found SMSC LPC47B397-NC (base address 0x0480, revision 1) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com usbcore: registered new interface driver hiddev input: Microsoft Natural=C2=AE Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input4 input: USB HID v1.11 Keyboard [Microsoft Natural=C2=AE Ergonomic Keyboard 4000] on usb-0000:00:02.0-2 input: Microsoft Natural=C2=AE Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input5 input: USB HID v1.11 Device [Microsoft Natural=C2=AE Ergonomic Keyboard 400= 0] on usb-0000:00:02.0-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC). ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 50837 usecs intel8x0: clocking to 46776 ACPI: PCI Interrupt 0000:11:04.0[A] -> GSI 24 (level, low) -> IRQ 24 usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: Terratec Aureon 7.1-Universe at 0x3080, irq 24 #1: NVidia CK804 with AD1981B at irq 22 #2: USB Device 0x46d:0x8b2 at usb-0000:00:02.0-3, full speed TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 300k freed dib0700: loaded with support for 2 different device-types dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. i2c-adapter i2c-2: SMBus Quick command not supported, can't probe for chips dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) i2c-adapter i2c-3: SMBus Quick command not supported, can't probe for chips DVB: registering frontend 0 (DiBcom 3000MC/P)... MT2060: successfully identified (IF1 =3D 1220) dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips DVB: registering frontend 1 (DiBcom 3000MC/P)... MT2060: successfully identified (IF1 =3D 1220) dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700 Adding 8446968k swap on /dev/hda7. Priority:-1 extents:1 across:8446968k EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth1: no link during initialization. ADDRCONF(NETDEV_UP): eth1: link is not ready PPP generic driver version 2.4.2 NET: Registered protocol family 24 eth2: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK3] -> GSI 18 (level, high) -> IRQ 18 PCI: Setting latency timer of device 0000:02:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 usb 1-1: new high speed USB device using ehci_hcd and address 5 usb 1-1: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning scsi 6:0:0:0: CD-ROM PLEXTOR DVD-ROM PX-130A 1.03 PQ: 0 ANSI: 0 CCS sr0: scsi3-mmc drive: 0x/50x cd/rw xa/form2 cdda tray sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg3 type 5 usb-storage: device scan complete end_request: I/O error, dev sr0, sector 308688 Buffer I/O error on device sr0, logical block 77172 Buffer I/O error on device sr0, logical block 77173 end_request: I/O error, dev sr0, sector 308688 Buffer I/O error on device sr0, logical block 77172 Buffer I/O error on device sr0, logical block 77173 end_request: I/O error, dev sr0, sector 308816 Buffer I/O error on device sr0, logical block 77204 Buffer I/O error on device sr0, logical block 77205 end_request: I/O error, dev sr0, sector 308816 Buffer I/O error on device sr0, logical block 77204 Buffer I/O error on device sr0, logical block 77205 UDF-fs: No VRS found tun0: Disabled Privacy Extensions usb 1-1: USB disconnect, address 5 ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 next cpb idx 0x0 ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 5: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 6: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 7: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 8: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 9: ctl_flags 0x1f, resp_flags 0x2 ata1: CPB 10: ctl_flags 0x1f, resp_flags 0x2 ata1: timeout waiting for ADMA IDLE, stat=3D0x400 ata1.00: exception Emask 0x0 SAct 0x7ff SErr 0x0 action 0x2 frozen ata1.00: cmd 61/10:00:2e:07:a8/01:00:0b:00:00/40 tag 0 cdb 0x0 data 139264 out res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/18:08:07:3f:02/00:00:00:00:00/40 tag 1 cdb 0x0 data 12288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:10:b6:a8:23/00:00:0d:00:00/40 tag 2 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:18:f6:37:68/00:00:0d:00:00/40 tag 3 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:20:9e:32:a1/00:00:0d:00:00/40 tag 4 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:28:4f:00:dc/00:00:02:00:00/40 tag 5 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:30:6f:00:dc/00:00:02:00:00/40 tag 6 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:38:3f:03:2c/00:00:05:00:00/40 tag 7 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:40:36:ea:72/00:00:0d:00:00/40 tag 8 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:48:7f:00:c4/00:00:05:00:00/40 tag 9 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:50:47:02:d8/00:00:05:00:00/40 tag 10 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: soft resetting port ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA --=-Dm3iS718mObcR+7kUU44 Content-Type: application/x-pkcs7-signature; name=smime.p7s Content-Disposition: attachment; filename=smime.p7s Content-Transfer-Encoding: base64 MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIQ/DCCBXQw ggNcoAMCAQICAjh/MA0GCSqGSIb3DQEBBQUAMFQxFDASBgNVBAoTC0NBY2VydCBJbmMuMR4wHAYD VQQLExVodHRwOi8vd3d3LkNBY2VydC5vcmcxHDAaBgNVBAMTE0NBY2VydCBDbGFzcyAzIFJvb3Qw HhcNMDcxMDI0MTkyNzQxWhcNMDkxMDIzMTkyNzQxWjB8MSEwHwYDVQQDExhDaHJpc3RvcGggQW50 b24gTWl0dGVyZXIxJDAiBgkqhkiG9w0BCQEWFWNhbGVzdHlvQHNjaWVudGlhLm5ldDExMC8GCSqG SIb3DQEJARYibWFpbEBjaHJpc3RvcGguYW50b24ubWl0dGVyZXIubmFtZTCCASIwDQYJKoZIhvcN AQEBBQADggEPADCCAQoCggEBAPgLlUBy3NRbH25w8pOnhF+qtj4GN04aG7ur+JsXTcEkFNOZWZ5I al2PaQWP7GfEEp5lL0w/LdYXPfnLNohp4l/Nb+db8aHUeVBYgGBTPGF+mJHfJGeochfvZo78u6Bp KkCrDAw2BKN1JNxw+OxmWuunCmXSFM9gqRfBnfmc25P6ba9tQlDXGLKZA8/JKXLMKcTTS7dIkroE bM5FTSaAmGWkvwnD6fpxjFgWNLXjagNqlQD6+q+a//+gXNOGP34aZ3qPnLPR/gUi/yqrQuAVvGep GAhl4B1Kn+c7eROoodq33Ghomoznh8hogBkDJXp+Xq4k8measwtN99ZUdMaFeJsCAwEAAaOCASYw ggEiMAwGA1UdEwEB/wQCMAAwVgYJYIZIAYb4QgENBEkWR1RvIGdldCB5b3VyIG93biBjZXJ0aWZp Y2F0ZSBmb3IgRlJFRSBoZWFkIG92ZXIgdG8gaHR0cDovL3d3dy5DQWNlcnQub3JnMEAGA1UdJQQ5 MDcGCCsGAQUFBwMEBggrBgEFBQcDAgYKKwYBBAGCNwoDBAYKKwYBBAGCNwoDAwYJYIZIAYb4QgQB MDIGCCsGAQUFBwEBBCYwJDAiBggrBgEFBQcwAYYWaHR0cDovL29jc3AuY2FjZXJ0Lm9yZzBEBgNV HREEPTA7gRVjYWxlc3R5b0BzY2llbnRpYS5uZXSBIm1haWxAY2hyaXN0b3BoLmFudG9uLm1pdHRl cmVyLm5hbWUwDQYJKoZIhvcNAQEFBQADggIBAKZI/PvI6ynlgITrRTU7WaFlllAtkWCC6MGKEE16 hUebNwK/ccjUquHLfDg2LYbp/WHx3zZQxkj7CarzMUqnoDTnJMbKovDOdZ3vqbs6p6fKuRUjTkaE cN/0ZDllc4Bewa5ZUfdD2Ml3ObxF2oK7wmTw4tQCSKZlPcq+ML5hV3Exag2fBcGzeR+G/QUWKcmY laOpRj8Vu8ZMXpzSD8T+Tp2nKP+iqa2lv+UCI6cSXJ+fdyVMB1Tw98TdRo2ogk38ZhdlxpEDRonW kWuBmS9e7lABqVpyfVAuODF3cKfbxWJnFBkipEJzkpSUsCFQ0SSxs5xkad/bAFF3g1p+E9+EnZMe UJ55L2ZEEtFfgfsPo0N/M7QvWS8COPSwttdSgiXFm9/WHPxu10D6mb/ghNeUFRTrn8miZOer+3p+ 8TRruFMazmsak0emJ8dxsTCdbWZzJEqgz833uttaqZWbHsNY7FuIcj242RTsgetkIRHzaxpKxmUY NnF78vxm3HW/ZX1OpOQsLIT5t+7YDKuLGB15dJnQjQFy9w8TZFaoFUSd39rFdrFtfps7FWb73yov Zcz42a8MrxBcWpZWzpif59TT34IJEEN1/+bXPMGELyT417DIoV8faB6GPKCFV0l7G1TEJTYlobbZ rYVb8B7a0Uu1lPgyxLWlZLWiTYDQF2y8U3KWMIIFdDCCA1ygAwIBAgICOH8wDQYJKoZIhvcNAQEF BQAwVDEUMBIGA1UEChMLQ0FjZXJ0IEluYy4xHjAcBgNVBAsTFWh0dHA6Ly93d3cuQ0FjZXJ0Lm9y ZzEcMBoGA1UEAxMTQ0FjZXJ0IENsYXNzIDMgUm9vdDAeFw0wNzEwMjQxOTI3NDFaFw0wOTEwMjMx OTI3NDFaMHwxITAfBgNVBAMTGENocmlzdG9waCBBbnRvbiBNaXR0ZXJlcjEkMCIGCSqGSIb3DQEJ ARYVY2FsZXN0eW9Ac2NpZW50aWEubmV0MTEwLwYJKoZIhvcNAQkBFiJtYWlsQGNocmlzdG9waC5h bnRvbi5taXR0ZXJlci5uYW1lMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA+AuVQHLc 1FsfbnDyk6eEX6q2PgY3Thobu6v4mxdNwSQU05lZnkhqXY9pBY/sZ8QSnmUvTD8t1hc9+cs2iGni X81v51vxodR5UFiAYFM8YX6Ykd8kZ6hyF+9mjvy7oGkqQKsMDDYEo3Uk3HD47GZa66cKZdIUz2Cp F8Gd+Zzbk/ptr21CUNcYspkDz8kpcswpxNNLt0iSugRszkVNJoCYZaS/CcPp+nGMWBY0teNqA2qV APr6r5r//6Bc04Y/fhpneo+cs9H+BSL/KqtC4BW8Z6kYCGXgHUqf5zt5E6ih2rfcaGiajOeHyGiA GQMlen5eriTyZ5qzC0331lR0xoV4mwIDAQABo4IBJjCCASIwDAYDVR0TAQH/BAIwADBWBglghkgB hvhCAQ0ESRZHVG8gZ2V0IHlvdXIgb3duIGNlcnRpZmljYXRlIGZvciBGUkVFIGhlYWQgb3ZlciB0 byBodHRwOi8vd3d3LkNBY2VydC5vcmcwQAYDVR0lBDkwNwYIKwYBBQUHAwQGCCsGAQUFBwMCBgor BgEEAYI3CgMEBgorBgEEAYI3CgMDBglghkgBhvhCBAEwMgYIKwYBBQUHAQEEJjAkMCIGCCsGAQUF BzABhhZodHRwOi8vb2NzcC5jYWNlcnQub3JnMEQGA1UdEQQ9MDuBFWNhbGVzdHlvQHNjaWVudGlh Lm5ldIEibWFpbEBjaHJpc3RvcGguYW50b24ubWl0dGVyZXIubmFtZTANBgkqhkiG9w0BAQUFAAOC AgEApkj8+8jrKeWAhOtFNTtZoWWWUC2RYILowYoQTXqFR5s3Ar9xyNSq4ct8ODYthun9YfHfNlDG SPsJqvMxSqegNOckxsqi8M51ne+puzqnp8q5FSNORoRw3/RkOWVzgF7BrllR90PYyXc5vEXagrvC ZPDi1AJIpmU9yr4wvmFXcTFqDZ8FwbN5H4b9BRYpyZiVo6lGPxW7xkxenNIPxP5Onaco/6KpraW/ 5QIjpxJcn593JUwHVPD3xN1GjaiCTfxmF2XGkQNGidaRa4GZL17uUAGpWnJ9UC44MXdwp9vFYmcU GSKkQnOSlJSwIVDRJLGznGRp39sAUXeDWn4T34Sdkx5QnnkvZkQS0V+B+w+jQ38ztC9ZLwI49LC2 11KCJcWb39Yc/G7XQPqZv+CE15QVFOufyaJk56v7en7xNGu4UxrOaxqTR6Ynx3GxMJ1tZnMkSqDP zfe621qplZsew1jsW4hyPbjZFOyB62QhEfNrGkrGZRg2cXvy/Gbcdb9lfU6k5CwshPm37tgMq4sY HXl0mdCNAXL3DxNkVqgVRJ3f2sV2sW1+mzsVZvvfKi9lzPjZrwyvEFxallbOmJ/n1NPfggkQQ3X/ 5tc8wYQvJPjXsMihXx9oHoY8oIVXSXsbVMQlNiWhttmthVvwHtrRS7WU+DLEtaVktaJNgNAXbLxT cpYwggYIMIID8KADAgECAgEBMA0GCSqGSIb3DQEBBAUAMHkxEDAOBgNVBAoTB1Jvb3QgQ0ExHjAc BgNVBAsTFWh0dHA6Ly93d3cuY2FjZXJ0Lm9yZzEiMCAGA1UEAxMZQ0EgQ2VydCBTaWduaW5nIEF1 dGhvcml0eTEhMB8GCSqGSIb3DQEJARYSc3VwcG9ydEBjYWNlcnQub3JnMB4XDTA1MTAxNDA3MzY1 NVoXDTMzMDMyODA3MzY1NVowVDEUMBIGA1UEChMLQ0FjZXJ0IEluYy4xHjAcBgNVBAsTFWh0dHA6 Ly93d3cuQ0FjZXJ0Lm9yZzEcMBoGA1UEAxMTQ0FjZXJ0IENsYXNzIDMgUm9vdDCCAiIwDQYJKoZI hvcNAQEBBQADggIPADCCAgoCggIBAKtJNRFIfNImflOUz0Op3SjXQiqL84d4GVh8D57aiX3h++ty kA10oZZkq5+gJJlz2uJVdscXe/UErEa4w75/ZI0QbCTzYZzA8pD6Ueb1aQFjww9W4kpCz+JEjCUo qMV5CX1GuYrz6fM0KQhF5Byfy5QEHIGoFLOYZcRD7E6CjQnRvapbjZLQ7N6QxX8KwuPr5jFaXnQ+ lzNZ6MMDPWAzv/fRb0fEze5ig1JuLgiapNkVGJGmhZJHsK5I6223IeyFGmhyNav/8BBdwPSUp2rV O5J+TJAFfpPBLIukjmJ0FXFuC3ED6q8VOJrU0gVyb4z5K+taciX5OUbjchs+BMNkJyIQKopPWKcD rb60LhPtXapI19V91Cp7XPpGBFDkzA5CW4zt2/LP/JaT4NsRNlRiNDiPDGCbO5dWOK3z0luLoFvq Tpa4fNfVoIZwQNORKbeiPK31jLvPGpKK5DR7wNhsX+kKwsOnIJpa3yxdUly6R9Wb7yQocDggL9V/ KcCyQQNokszgnMyXS0XvOhAKq3A6mJVwrTWx6oUrpByAITGprmB6gCZIALgBwJNjVSKRPFbnr9s6 JfOPMVTqJouBWfmh0VMRxXudA/Z0EeBtsSw/LIaRmXGapneLNGDRFLQsrJ2vjBDTn8Rq+G8T/HNZ 92ZCdB6K4/jc0m+YnMtHmJVABfvpAgMBAAGjgb8wgbwwDwYDVR0TAQH/BAUwAwEB/zBdBggrBgEF BQcBAQRRME8wIwYIKwYBBQUHMAGGF2h0dHA6Ly9vY3NwLkNBY2VydC5vcmcvMCgGCCsGAQUFBzAC hhxodHRwOi8vd3d3LkNBY2VydC5vcmcvY2EuY3J0MEoGA1UdIARDMEEwPwYIKwYBBAGBkEowMzAx BggrBgEFBQcCARYlaHR0cDovL3d3dy5DQWNlcnQub3JnL2luZGV4LnBocD9pZD0xMDANBgkqhkiG 9w0BAQQFAAOCAgEAfwiIodoaUEnaifuhCHLzivcexDq0eVsgMLFF3sJd02Vp8cJdVFQ8hV+5e0KR wpn9G1Gbq0aloRBTnm2IrHNuLDOm8PSe4HXBPohFqeFmQ/5WWtF6QXj3QNpKOvELW6W7FgbmwueT uYVNl0+xHjhDgO+bDYzvuKdgAIdXfR5EHMsj75s8mZ2vtSkcRXkWlk0nbfEcbMPCVWSzvBTi86Qf HjL8JxUFz90urj6CYXvwIRAY9kTqUzn53NCaIODGu+C7Wk/EmcgHvbW9otsuYg1CNEG8/4uK9VEi qogwAOKw1Ly+ZbrVA1d5m+jcyE34UO2RpVIooqz7Nlg+6ZQrkVCHG9Ze1ozM9w8QDFJO0BZh5eUK bL8Xx3JGV5yY9WxgY3pvXrlOL8i5ubtqhbyYDe35PpeENJSuAK+h5eeSbk698+LZFItc0usBbKAX pS0Q65x6Sr297s797SJAq3A4iPUKh2rCqwVgyUgF2lPB3kR3arPzPDztgLymOEopJF/+WTubJXpW YwBkuV2kYn1XNk+tg+8fklOgjndX3eVhET0jAJBMPPqjYJMEo6819g5qj09KYKeFBWxGoY/0x3bj oVlX93GyxG4UXG1tQWbfG5Ox1ADD7svPPD0hgKlfY2X83eBfpPQr8IVxQdRnJfsasZeu1pmCE0HS bqUbmSeA5wupqAAxggK6MIICtgIBATBaMFQxFDASBgNVBAoTC0NBY2VydCBJbmMuMR4wHAYDVQQL ExVodHRwOi8vd3d3LkNBY2VydC5vcmcxHDAaBgNVBAMTE0NBY2VydCBDbGFzcyAzIFJvb3QCAjh/ MAkGBSsOAwIaBQCgggE1MBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8X DTA3MTIxNDAwMjEzOVowIwYJKoZIhvcNAQkEMRYEFA94T1knjRq0ZqNvo3tGLfIUC1lUMGkGCSsG AQQBgjcQBDFcMFowVDEUMBIGA1UEChMLQ0FjZXJ0IEluYy4xHjAcBgNVBAsTFWh0dHA6Ly93d3cu Q0FjZXJ0Lm9yZzEcMBoGA1UEAxMTQ0FjZXJ0IENsYXNzIDMgUm9vdAICOH8wawYLKoZIhvcNAQkQ AgsxXKBaMFQxFDASBgNVBAoTC0NBY2VydCBJbmMuMR4wHAYDVQQLExVodHRwOi8vd3d3LkNBY2Vy dC5vcmcxHDAaBgNVBAMTE0NBY2VydCBDbGFzcyAzIFJvb3QCAjh/MA0GCSqGSIb3DQEBAQUABIIB ALwDX4nsueG6giOSPfZPZpsiRRQjHXsnRYUTxhPR4sFv07UXagtOaVQPfC4uAdCJjyZygPQaWKUd hCy0q9WjxtM6lLggAsqphm3cbUDPs9qI5e7o8ctK+OttvprA6n7ZhxXMBL+prMIvX06qw5q9jllz 2H7gGeRwPN3NEjmhjCv75JWM+RsNJhqbgzfmePtVCg/MLez+rwWbMcNQRSV8l8ztJpuSn6EvtFL5 8oXZLg+b46NQPWhr/SEfWMXQV/ax/rggXlIsPlUQbCdGnW0kswWUj27VK6ll2y7RH8BGsV9VgsgN spgnRg5nS68zdMKu++JWLbx/ldnv2ODa7HsOGcEAAAAAAAA= --=-Dm3iS718mObcR+7kUU44-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/