Received-SPF: pass (google.com: domain of linux-kernel+bounces-30157-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Chukun Pan <amadeus@jmu.edu.cn>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	Chukun Pan <amadeus@jmu.edu.cn>
Subject: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
Date: Thu, 18 Jan 2024 21:30:22 +0800
Message-Id: <20240118133022.553339-3-amadeus@jmu.edu.cn>
In-Reply-To: <20240118133022.553339-1-amadeus@jmu.edu.cn>
References: <20240118133022.553339-1-amadeus@jmu.edu.cn>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Enable mmc device found on ipq6018 devices.
This node supports both eMMC and SD cards.

Tested with:
  eMMC (HS200)
  SD Card (SDR50/SDR104)

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 322eced0b876..420c192bccd9 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -441,6 +441,25 @@ dwc_1: usb@7000000 {
 			};
 		};
 
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x7804000 0x0 0x1000>,
+			      <0x0 0x7805000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			max-frequency = <192000000>;
+			status = "disabled";
+		};
+
 		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07884000 0x0 0x2b000>;
-- 
2.25.1