Received-SPF: pass (google.com: domain of linux-kernel+bounces-32176-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Andre Werner <andre.werner@systec-electronic.com>
To: andrew@lunn.ch,
	hkallweit1@gmail.com,
	davem@davemloft.net,
	edumazet@google.com,
	kuba@kernel.org,
	pabeni@redhat.com
Cc: linux@armlinux.org.uk,
	netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Andre Werner <andre.werner@systec-electronic.com>
Subject: [RFC net-next v4 1/2] net: phy: phy_device: Prevent nullptr exceptions on ISR
Date: Sun, 21 Jan 2024 20:54:48 +0100
Message-ID: <20240121201511.8997-2-andre.werner@systec-electronic.com>
In-Reply-To: <20240121201511.8997-1-andre.werner@systec-electronic.com>
References: <20240121201511.8997-1-andre.werner@systec-electronic.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

If phydev->irq is set unconditionally, check
for valid interrupt handler or fall back to polling mode to prevent
nullptr exceptions in interrupt service routine.

Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
---
v4:
- Delete phydev_warn and comment as suggested.
---
 drivers/net/phy/phy_device.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 3611ea64875e..7cbe7c714177 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1413,6 +1413,11 @@ int phy_sfp_probe(struct phy_device *phydev,
 }
 EXPORT_SYMBOL(phy_sfp_probe);
=20
+static bool phy_drv_supports_irq(struct phy_driver *phydrv)
+{
+	return phydrv->config_intr && phydrv->handle_interrupt;
+}
+
 /**
  * phy_attach_direct - attach a network device to a given PHY device poi=
nter
  * @dev: network device to attach
@@ -1527,6 +1532,9 @@ int phy_attach_direct(struct net_device *dev, struc=
t phy_device *phydev,
 	if (phydev->dev_flags & PHY_F_NO_IRQ)
 		phydev->irq =3D PHY_POLL;
=20
+	if (!phy_drv_supports_irq(phydev->drv) && phy_interrupt_is_valid(phydev=
))
+		phydev->irq =3D PHY_POLL;
+
 	/* Port is set to PORT_TP by default and the actual PHY driver will set
 	 * it to different value depending on the PHY configuration. If we have
 	 * the generic PHY driver we can't figure it out, thus set the old
@@ -2992,11 +3000,6 @@ s32 phy_get_internal_delay(struct phy_device *phyd=
ev, struct device *dev,
 }
 EXPORT_SYMBOL(phy_get_internal_delay);
=20
-static bool phy_drv_supports_irq(struct phy_driver *phydrv)
-{
-	return phydrv->config_intr && phydrv->handle_interrupt;
-}
-
 static int phy_led_set_brightness(struct led_classdev *led_cdev,
 				  enum led_brightness value)
 {
--=20
2.43.0