Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758510AbXLPAGW (ORCPT ); Sat, 15 Dec 2007 19:06:22 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752504AbXLPAGL (ORCPT ); Sat, 15 Dec 2007 19:06:11 -0500 Received: from hades.rz.tu-clausthal.de ([139.174.2.20]:64297 "EHLO hades.rz.tu-clausthal.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752275AbXLPAGH (ORCPT ); Sat, 15 Dec 2007 19:06:07 -0500 From: "Hemmann, Volker Armin" To: linux-kernel@vger.kernel.org Subject: almost daily Kernel oops with 2.6.23.9 Date: Sun, 16 Dec 2007 01:06:00 +0100 User-Agent: KMail/1.9.7 MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_ovGZHcC5JBYVmHO" Message-Id: <200712160106.00464.volker.armin.hemmann@tu-clausthal.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 74148 Lines: 2404 --Boundary-00=_ovGZHcC5JBYVmHO Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, for some time I experience almost daily kernel oops. At first I suspected the nvidia driver, but today I got it without the driv= er=20 loaded (kernel modul removed from harddisk, nv set in config). This is a pretty much 'vanilla' kernel.org kernel. Only patch added is for= =20 reiser4 support. When this happens, ps aux is stuck. The process mentioned in the oops is st= uck=20 too. This happens completly unrelated to the load or temperature of the=20 system. It is a little bit hard to reproduce. Some days I don't get the oops, on ot= her=20 days I get two. The only thing I can say for sure: with 2.6.21 this did not= =20 happen and I can not remember any problems with 2.6.22. If the oops happens the system usually has had run for several hours. Sometimes it is kmail which triggers it, sometimes kio_http, emerge... Kern= el=20 is 'freshly' built to add CONFIG_KALLSYM which I have usually disabled. [ 8763.521595] Unable to handle kernel paging request at ffff910073e22db0 R= IP: [ 8763.521600] [] _spin_lock+0x0/0xf [ 8763.521606] PGD 0 [ 8763.521608] Oops: 0002 [1] SMP [ 8763.521610] CPU 1 [ 8763.521611] Modules linked in: isofs snd_usb_audio snd_usb_lib k8temp=20 w83627ehf hwmon_vid hwmon i2c_core snd_seq_midi snd_emu10k1_synth=20 snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_pcm_oss snd_mixer_oss= =20 snd_seq_oss snd_seq_midi_event snd_seq snd_emu10k1 snd_rawmidi snd_ac97_cod= ec=20 ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem=20 snd_hwdep snd r8169 [ 8763.521626] Pid: 10497, comm: emerge Not tainted 2.6.23.9reiser4 #4 [ 8763.521628] RIP: 0010:[] []=20 _spin_lock+0x0/0xf [ 8763.521631] RSP: 0018:ffff81005e185e10 EFLAGS: 00010282 [ 8763.521632] RAX: ffff81005e485f00 RBX: ffff910073e22db0 RCX:=20 0000000000000000 [ 8763.521634] RDX: 0000000000000000 RSI: ffff810040aeb3d8 RDI:=20 ffff910073e22db0 [ 8763.521635] RBP: ffff81005e485f00 R08: 800000007f3c2005 R09:=20 000000000003ccd0 [ 8763.521637] R10: ffff81000250d820 R11: 0000000000000001 R12:=20 ffff81003a3b3820 [ 8763.521638] R13: ffff81007e610f00 R14: ffff810040aeb330 R15:=20 ffff81007e610f00 [ 8763.521640] FS: 00002b2dce7a9140(0000) GS:ffff81007ff3bec0(0000)=20 knlGS:00000000f7b83b80 [ 8763.521642] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 8763.521644] CR2: ffff910073e22db0 CR3: 000000003ba69000 CR4:=20 00000000000006e0 [ 8763.521645] DR0: 0000000000000000 DR1: 0000000000000000 DR2:=20 0000000000000000 [ 8763.521647] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:=20 0000000000000400 [ 8763.521649] Process emerge (pid: 10497, threadinfo ffff81005e184000, tas= k=20 ffff8100580bb080) [ 8763.521650] Stack: ffffffff8026b048 0000000000000001 ffff81005e485f00=20 0000000000000001 [ 8763.521654] ffffffff80230d0c 00002b2dce7a91d0 0000000000000000=20 ffff81005e185f58 [ 8763.521656] 00007fffdc32be90 0000000001200011 0000000000000000=20 ffff81003a3b3820 [ 8763.521658] Call Trace: [ 8763.521662] [] anon_vma_link+0x1a/0x40 [ 8763.521666] [] copy_process+0xb03/0x1301 [ 8763.521671] [] do_fork+0xb1/0x1fc [ 8763.521675] [] system_call+0x7e/0x83 [ 8763.521677] [] ptregscall_common+0x67/0xb0 [ 8763.521681] [ 8763.521682] [ 8763.521682] Code: f0 ff 0f 79 09 f3 90 83 3f 00 7e f9 eb f2 c3 f0 81 2f = 00=20 00 [ 8763.521688] RIP [] _spin_lock+0x0/0xf [ 8763.521690] RSP [ 8763.521691] CR2: ffff910073e22db0 dmesg: [ 0.000000] Linux version 2.6.23.9reiser4 (root@energy) (gcc version 4.2= =2E2=20 (Gentoo 4.2.2 p1.0)) #4 SMP Sat Dec 15 20:06:33 CET 2007 [ 0.000000] Command line: root=3D/dev/sda3 nmi_watchdog=3D0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 524208) 1 entries of 256 u= sed [ 0.000000] end_pfn_map =3D 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000FA530, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7FFB0000, 003C (r1 A M I OEMRSDT 9000720 MSFT = =20 97) [ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT = =20 97) [ 0.000000] ACPI: DSDT 7FFB0450, 4FFA (r1 ASR19 ASR1915A 15A INTL= =20 20051117) [ 0.000000] ACPI: FACS 7FFC0000, 0040 [ 0.000000] ACPI: APIC 7FFB0390, 0080 (r1 A M I OEMAPIC 9000720 MSFT = =20 97) [ 0.000000] ACPI: MCFG 7FFB0410, 003C (r1 A M I OEMMCFG 9000720 MSFT = =20 97) [ 0.000000] ACPI: OEMB 7FFC0040, 0060 (r1 A M I AMI_OEM 9000720 MSFT = =20 97) [ 0.000000] ACPI: HPET 7FFB5450, 0038 (r1 A M I OEMHPET0 9000720 MSFT = =20 97) [ 0.000000] ACPI: SSDT 7FFB5490, 030E (r1 A M I POWERNOW 1 AMD = =20 1) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 524208) 1 entries of 256 u= sed [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524208 [ 0.000000] On node 0 totalpages: 524111 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1038 pages reserved [ 0.000000] DMA zone: 2905 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7110 pages used for memmap [ 0.000000] DMA32 zone: 513002 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -= =20 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -= =20 00000000000e6000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 -= =20 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap:=20 80000000:7ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 29608 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order. Total pages: 515907 [ 0.000000] Kernel command line: root=3D/dev/sda3 nmi_watchdog=3D0 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 30.860942] time.c: Detected 3013.887 MHz processor. [ 30.865131] Console: colour VGA+ 80x25 [ 30.865134] console [tty0] enabled [ 30.876134] Dentry cache hash table entries: 262144 (order: 9, 2097152=20 bytes) [ 30.877449] Inode-cache hash table entries: 131072 (order: 8, 1048576=20 bytes) [ 30.877821] Checking aperture... [ 30.877980] CPU 0: aperture @ e888000000 size 32 MB [ 30.878137] Aperture too small (32 MB) [ 30.883953] No AGP bridge found [ 30.895855] Memory: 2059832k/2096832k available (2324k kernel code, 3632= 0k=20 reserved, 950k data, 180k init) [ 30.977505] Calibrating delay using timer specific routine.. 6034.61=20 BogoMIPS (lpj=3D10053777) [ 30.977857] Mount-cache hash table entries: 256 [ 30.978095] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64=20 bytes/line) [ 30.978256] CPU: L2 Cache: 1024K (64 bytes/line) [ 30.978415] CPU: Physical Processor ID: 0 [ 30.978573] CPU: Processor Core ID: 0 [ 30.978747] SMP alternatives: switching to UP code [ 30.979293] ACPI: Core revision 20070126 [ 31.014735] Using local APIC timer interrupts. [ 31.048000] result 12557871 [ 31.048155] Detected 12.557 MHz APIC timer. [ 31.050745] SMP alternatives: switching to SMP code [ 31.051103] Booting processor 1/2 APIC 0x1 [ 31.061408] Initializing CPU#1 [ 31.143888] Calibrating delay using timer specific routine.. 6030.02=20 BogoMIPS (lpj=3D10046434) [ 31.143893] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64=20 bytes/line) [ 31.143894] CPU: L2 Cache: 1024K (64 bytes/line) [ 31.143896] CPU: Physical Processor ID: 0 [ 31.143897] CPU: Processor Core ID: 1 [ 31.143979] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 31.147126] Brought up 2 CPUs [ 31.148720] NET: Registered protocol family 16 [ 31.148962] ACPI: bus type pci registered [ 31.149170] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 31.149331] PCI: Not using MMCONFIG. [ 31.149488] PCI: Using configuration type 1 [ 31.152045] ACPI: EC: Look up EC in DSDT [ 31.155660] ACPI: Interpreter enabled [ 31.155818] ACPI: (supports S0 S1 S3 S4 S5) [ 31.156106] ACPI: Using IOAPIC for interrupt routing [ 31.156447] Error attaching device data [ 31.156608] Error attaching device data [ 31.156768] Error attaching device data [ 31.156929] Error attaching device data [ 31.162533] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 31.163163] PCI: Transparent bridge - 0000:00:08.0 [ 31.163591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 31.163732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 31.163838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 31.163898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 31.163957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 31.164016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 31.168099] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5 [ 31.168556] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 31.169011] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,=20 disabled. [ 31.169491] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11 [ 31.169946] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0,=20 disabled. [ 31.170427] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 31.170883] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0,=20 disabled. [ 31.171363] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 31.171819] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 31.172274] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0,=20 disabled. [ 31.172755] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 31.173210] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,=20 disabled. [ 31.173691] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0,=20 disabled. [ 31.174186] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 31.174642] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0,=20 disabled. [ 31.175122] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 31.175577] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0,=20 disabled. [ 31.176082] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,=20 disabled. [ 31.176563] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0,=20 disabled. [ 31.177044] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0,=20 disabled. [ 31.177501] Linux Plug and Play Support v0.97 (c) Adam Belay [ 31.177674] pnp: PnP ACPI init [ 31.177835] ACPI: bus type pnp registered [ 31.180623] pnp: PnP ACPI: found 13 devices [ 31.180782] ACPI: ACPI bus type pnp unregistered [ 31.181044] SCSI subsystem initialized [ 31.181223] libata version 2.21 loaded. [ 31.181275] usbcore: registered new interface driver usbfs [ 31.181453] usbcore: registered new interface driver hub [ 31.181631] usbcore: registered new device driver usb [ 31.181825] PCI: Using ACPI for IRQ routing [ 31.181984] PCI: If a device doesn't work, try "pci=3Drouteirq". If it= =20 helps, post a report [ 31.193725] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 31.193982] hpet0: 3 32-bit timers, 25000000 Hz [ 31.197104] Time: hpet clocksource has been installed. [ 31.203675] pnp: 00:05: iomem range 0x0-0x0 could not be reserved [ 31.203837] pnp: 00:05: iomem range 0xfee01000-0xfeefffff has been reser= ved [ 31.204001] pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be=20 reserved [ 31.204291] pnp: 00:07: iomem range 0xfee00000-0xfee00fff could not be=20 reserved [ 31.204585] pnp: 00:0a: ioport range 0x290-0x29f has been reserved [ 31.204747] pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reser= ved [ 31.204909] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 31.205069] pnp: 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 31.205230] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 31.205391] pnp: 00:0c: iomem range 0x100000-0x7fffffff could not be=20 reserved [ 31.205724] PCI: Bridge: 0000:00:08.0 [ 31.205882] IO window: d000-dfff [ 31.206041] MEM window: f9f00000-f9ffffff [ 31.206200] PREFETCH window: 88000000-880fffff [ 31.206359] PCI: Bridge: 0000:00:0b.0 [ 31.206517] IO window: c000-cfff [ 31.206675] MEM window: f9e00000-f9efffff [ 31.206833] PREFETCH window: disabled. [ 31.206993] PCI: Bridge: 0000:00:0c.0 [ 31.207150] IO window: disabled. [ 31.207308] MEM window: disabled. [ 31.207466] PREFETCH window: disabled. [ 31.207624] PCI: Bridge: 0000:00:0d.0 [ 31.207782] IO window: e000-efff [ 31.207939] MEM window: fa000000-febfffff [ 31.208097] PREFETCH window: d0000000-dfffffff [ 31.208255] PCI: Bridge: 0000:00:0e.0 [ 31.208413] IO window: disabled. [ 31.208570] MEM window: disabled. [ 31.208728] PREFETCH window: disabled. [ 31.208891] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 31.208897] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 31.208902] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 31.208907] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 31.208911] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 31.208930] NET: Registered protocol family 2 [ 31.246914] IP route cache hash table entries: 65536 (order: 7, 524288=20 bytes) [ 31.247469] TCP established hash table entries: 131072 (order: 9, 314572= 8=20 bytes) [ 31.248924] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 31.252802] TCP: Hash tables configured (established 131072 bind 65536) [ 31.252963] TCP reno registered [ 31.264399] Total HugeTLB memory allocated, 0 [ 31.264639] Loading Reiser4. See www.namesys.com for a description of=20 Reiser4. [ 31.264998] io scheduler noop registered [ 31.265165] io scheduler cfq registered (default) [ 31.266123] Boot video device is 0000:04:00.0 [ 31.266243] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 31.266259] assign_interrupt_mode Found MSI capability [ 31.266434] Allocate Port Service[0000:00:0b.0:pcie00] [ 31.266477] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 31.266492] assign_interrupt_mode Found MSI capability [ 31.266660] Allocate Port Service[0000:00:0c.0:pcie00] [ 31.266698] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 31.266712] assign_interrupt_mode Found MSI capability [ 31.266880] Allocate Port Service[0000:00:0d.0:pcie00] [ 31.266917] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 31.266932] assign_interrupt_mode Found MSI capability [ 31.267106] Allocate Port Service[0000:00:0e.0:pcie00] [ 31.267273] input: Power Button (FF) as /class/input/input0 [ 31.267433] ACPI: Power Button (FF) [PWRF] [ 31.267644] input: Power Button (CM) as /class/input/input1 [ 31.267804] ACPI: Power Button (CM) [PWRB] [ 31.268072] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processo= r=20 Device is not present [20070126] [ 31.268419] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processo= r=20 Device is not present [20070126] [ 31.272588] Real Time Clock Driver v1.12ac [ 31.272827] hpet_resources: 0xfed00000 is busy [ 31.272838] Linux agpgart interface v0.102 [ 31.272997] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 secon= ds,=20 margin is 60 seconds). [ 31.273288] Hangcheck: Using get_cycles(). [ 31.273505] tun: Universal TUN/TAP device driver, 1.6 [ 31.273667] tun: (C) 1999-2004 Max Krasnyansky [ 31.273847] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 31.274008] ide: Assuming 33MHz system bus speed for PIO modes; override= =20 with idebus=3Dxx [ 31.274322] NFORCE-MCP65: IDE controller at PCI slot 0000:00:09.0 [ 31.274490] NFORCE-MCP65: chipset revision 161 [ 31.274647] NFORCE-MCP65: not 100% native mode: will probe irqs later [ 31.274810] NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller [ 31.274973] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,=20 hdb:pio [ 31.275318] Probing IDE interface ide0... [ 31.563038] hda: SAMSUNG SP1213N, ATA DISK drive [ 32.204893] hda: selected mode 0x45 [ 32.204959] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 32.207566] hda: max request size: 512KiB [ 32.207776] hda: 234493056 sectors (120060 MB) w/8192KiB Cache,=20 CHS=3D16383/255/63, UDMA(100) [ 32.208548] hda: cache flushes supported [ 32.208724] hda: hda1 hda2 hda3 < hda5 hda6 hda7 > [ 32.252230] ahci 0000:00:0a.0: version 2.3 [ 32.252405] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 32.252569] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23= =20 (level, low) -> IRQ 23 [ 33.255804] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x= f=20 impl IDE mode [ 33.256100] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio=20 [ 33.256261] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 33.256475] scsi0 : ahci [ 33.256700] scsi1 : ahci [ 33.256891] scsi2 : ahci [ 33.257083] scsi3 : ahci [ 33.257265] ata1: SATA max UDMA/133 cmd 0xffffc20000020100 ctl=20 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 33.257558] ata2: SATA max UDMA/133 cmd 0xffffc20000020180 ctl=20 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 33.257851] ata3: SATA max UDMA/133 cmd 0xffffc20000020200 ctl=20 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 33.258144] ata4: SATA max UDMA/133 cmd 0xffffc20000020280 ctl=20 0x0000000000000000 bmdma 0x0000000000000000 irq 315 [ 38.733347] ata1: port is slow to respond, please be patient (Status 0xd= 0) [ 43.579086] ata1: softreset failed (device not ready) [ 44.054683] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 44.055482] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133 [ 44.055643] ata1.00: 312581808 sectors, multi 16: LBA48=20 [ 44.056388] ata1.00: configured for UDMA/133 [ 44.370635] ata2: SATA link down (SStatus 0 SControl 300) [ 44.686590] ata3: SATA link down (SStatus 0 SControl 300) [ 45.002543] ata4: SATA link down (SStatus 0 SControl 300) [ 45.002855] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10= =2E0=20 PQ: 0 ANSI: 5 [ 45.003212] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 45.003378] sd 0:0:0:0: [sda] Write Protect is off [ 45.003537] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 45.003546] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 45.003860] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (16004= 2=20 MB) [ 45.004025] sd 0:0:0:0: [sda] Write Protect is off [ 45.004183] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 45.004191] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 45.004484] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 45.046817] sd 0:0:0:0: [sda] Attached SCSI disk [ 45.047020] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 45.047202] usbmon: debugfs is not available [ 45.047600] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 45.047765] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22= =20 (level, low) -> IRQ 22 [ 45.048343] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 45.048347] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 45.048599] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus= =20 number 1 [ 45.048910] ehci_hcd 0000:00:02.1: debug port 1 [ 45.049070] PCI: cache line size of 64 is not supported by device=20 0000:00:02.1 [ 45.049078] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00 [ 45.049249] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10= =20 Dec 2004 [ 45.049647] usb usb1: configuration #1 chosen from 1 choice [ 45.049834] hub 1-0:1.0: USB hub found [ 45.049995] hub 1-0:1.0: 10 ports detected [ 45.155677] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHC= I)=20 Driver [ 45.155904] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 45.156070] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 21= =20 (level, low) -> IRQ 21 [ 45.156551] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 45.156555] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 45.156796] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus= =20 number 2 [ 45.157101] ohci_hcd 0000:00:02.0: irq 21, io mem 0xf9dff000 [ 45.214253] usb usb2: configuration #1 chosen from 1 choice [ 45.214440] hub 2-0:1.0: USB hub found [ 45.214602] hub 2-0:1.0: 10 ports detected [ 45.318648] Initializing USB Mass Storage driver... [ 45.385017] usb 1-3: new high speed USB device using ehci_hcd and addres= s 2 [ 45.519386] usb 1-3: configuration #1 chosen from 1 choice [ 45.519849] hub 1-3:1.0: USB hub found [ 45.520326] hub 1-3:1.0: 4 ports detected [ 46.083539] usb 1-5: new high speed USB device using ehci_hcd and addres= s 4 [ 46.219320] usb 1-5: configuration #1 chosen from 1 choice [ 46.459366] usb 2-4: new full speed USB device using ohci_hcd and addres= s 2 [ 46.616086] usb 2-4: configuration #1 chosen from 1 choice [ 46.622040] hub 2-4:1.0: USB hub found [ 46.625010] hub 2-4:1.0: 4 ports detected [ 46.966245] usb 2-4.1: new full speed USB device using ohci_hcd and addr= ess=20 3 [ 47.101005] usb 2-4.1: configuration #1 chosen from 1 choice [ 47.325442] usb 2-4.4: new low speed USB device using ohci_hcd and addre= ss=20 4 [ 47.439245] usb 2-4.4: configuration #1 chosen from 1 choice [ 47.446182] usbcore: registered new interface driver usb-storage [ 47.446342] USB Mass Storage support registered. [ 47.446545] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x6= 4=20 irq 1,12 [ 47.449605] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 47.449766] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 47.450011] mice: PS/2 mouse device common for all mice [ 47.457273] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [ 47.457473] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse]= on=20 usb-0000:00:02.0-4.4 [ 47.457820] usbcore: registered new interface driver usbhid [ 47.457979] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 47.458164] TCP cubic registered [ 47.458329] NET: Registered protocol family 1 [ 47.458488] NET: Registered protocol family 17 [ 47.458661] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processo= r=20 6000+ processors (2 cpu cores) (version 2.00.00) [ 47.458896] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6 [ 47.459057] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8 [ 47.459217] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa [ 47.459385] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc [ 47.459545] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe [ 47.459705] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 47.459864] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 47.460023] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 47.473477] input: AT Translated Set 2 keyboard as /class/input/input3 [ 47.585999] ReiserFS: sda3: found reiserfs format "3.6" with standard=20 journal [ 47.586163] ReiserFS: sda3: using ordered data mode [ 47.595573] ReiserFS: sda3: journal params: device sda3, size 8192, jour= nal=20 first block 18, max trans len 1024, max batch 900, max commit age 30, max=20 trans age 30 [ 47.597024] ReiserFS: sda3: checking transaction log (sda3) [ 47.639879] ReiserFS: sda3: Using r5 hash to sort names [ 47.640052] VFS: Mounted root (reiserfs filesystem) readonly. [ 47.640224] Freeing unused kernel memory: 180k freed [ 52.296004] ReiserFS: sda3: switching to journaled data mode [ 52.661837] r8169 Gigabit Ethernet driver 2.2LK loaded [ 52.662119] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 52.662127] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19= =20 (level, low) -> IRQ 19 [ 52.662143] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 52.662318] eth0: RTL8168b/8111b at 0xffffc20000176000, 00:19:66:47:f3:c= b,=20 XID 38000000 IRQ 19 [ 53.079405] reiser4: sda5: found disk format 4.0.0. [ 58.429182] reiser4: sda6: found disk format 4.0.0. [ 59.790443] reiser4: hda7: found disk format 4.0.0. [ 60.459639] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1=20 across:1951888k [ 63.394904] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 63.394914] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18= =20 (level, low) -> IRQ 18 [ 63.397618] Audigy2 value: Special config. [ 64.938749] hda: selected mode 0x45 [ 65.739980] w83627ehf: Found W83627EHG chip at 0x290 [ 66.375065] r8169: eth0: link up [ 66.375207] r8169: eth0: link up [ 115.015710] kio_http_cache_[4201] general protection rip:3919ff1fe9=20 rsp:7fffa32dd7f0 error:0 [ 555.532998] usb 1-3.2: new full speed USB device using ehci_hcd and addr= ess=20 5 [ 555.601070] usb 1-3.2: configuration #1 chosen from 2 choices [ 555.603656] scsi4 : SCSI emulation for USB Mass Storage devices [ 555.603308] usb-storage: device found at 5 [ 555.603312] usb-storage: waiting for device to settle before scanning [ 559.174754] scsi 4:0:0:0: Direct-Access Motorola Motorola Phone 2.= 31=20 PQ: 0 ANSI: 2 [ 559.190122] sd 4:0:0:0: [sdb] 979456 512-byte hardware sectors (501 MB) [ 559.198183] sd 4:0:0:0: [sdb] Write Protect is off [ 559.198186] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 559.198187] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 559.228047] sd 4:0:0:0: [sdb] 979456 512-byte hardware sectors (501 MB) [ 559.235932] sd 4:0:0:0: [sdb] Write Protect is off [ 559.235935] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 559.235936] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 559.235945] sdb: sdb1 [ 559.257659] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 559.257695] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 559.257897] usb-storage: device scan complete [ 3348.892721] kio_http_cache_[5911] general protection rip:3919ff1fe9=20 rsp:7fffab797ca0 error:0 [ 4584.408120] kio_http_cache_[7020] general protection rip:3919ff1fe9=20 rsp:7ffff44b69c0 error:0 [ 5799.546999] kio_http_cache_[7826] general protection rip:3919ff1fe9=20 rsp:7fff0551ca30 error:0 [ 6372.520336] usb 1-5: USB disconnect, address 4 [ 6372.689352] usb 1-5: new high speed USB device using ehci_hcd and addres= s 6 [ 6372.775552] usb 1-5: configuration #1 chosen from 1 choice [ 6372.836210] usbcore: registered new interface driver snd-usb-audio [ 6373.438681] usb 1-5: USB disconnect, address 6 [ 6373.617312] usb 1-5: new high speed USB device using ehci_hcd and addres= s 7 [ 6373.695645] usb 1-5: configuration #1 chosen from 1 choice [ 7005.779226] kio_http_cache_[8829] general protection rip:3919ff1fe9=20 rsp:7fffa7ca71b0 error:0 [ 8257.197220] kio_http_cache_[10032] general protection rip:3919ff1fe9=20 rsp:7fff3d69dbb0 error:0 [ 8540.395721] usb 1-3.4: new high speed USB device using ehci_hcd and addr= ess=20 8 [ 8540.457758] usb 1-3.4: configuration #1 chosen from 1 choice [ 8540.458096] scsi5 : SCSI emulation for USB Mass Storage devices [ 8540.458304] usb-storage: device found at 8 [ 8540.458306] usb-storage: waiting for device to settle before scanning [ 8543.784201] scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.= 19=20 PQ: 0 ANSI: 0 [ 8543.802196] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 8543.802199] Uniform CD-ROM driver Revision: 3.20 [ 8543.793153] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 8543.793206] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 8543.793374] usb-storage: device scan complete [ 8572.123753] ISO 9660 Extensions: RRIP_1991A [ 8605.798506] ISO 9660 Extensions: RRIP_1991A [ 8763.521595] Unable to handle kernel paging request at ffff910073e22db0 R= IP:=20 [ 8763.521600] [] _spin_lock+0x0/0xf [ 8763.521606] PGD 0=20 [ 8763.521608] Oops: 0002 [1] SMP=20 [ 8763.521610] CPU 1=20 [ 8763.521611] Modules linked in: isofs snd_usb_audio snd_usb_lib k8temp=20 w83627ehf hwmon_vid hwmon i2c_core snd_seq_midi snd_emu10k1_synth=20 snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_pcm_oss snd_mixer_oss= =20 snd_seq_oss snd_seq_midi_event snd_seq snd_emu10k1 snd_rawmidi snd_ac97_cod= ec=20 ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem=20 snd_hwdep snd r8169 [ 8763.521626] Pid: 10497, comm: emerge Not tainted 2.6.23.9reiser4 #4 [ 8763.521628] RIP: 0010:[] []=20 _spin_lock+0x0/0xf [ 8763.521631] RSP: 0018:ffff81005e185e10 EFLAGS: 00010282 [ 8763.521632] RAX: ffff81005e485f00 RBX: ffff910073e22db0 RCX:=20 0000000000000000 [ 8763.521634] RDX: 0000000000000000 RSI: ffff810040aeb3d8 RDI:=20 ffff910073e22db0 [ 8763.521635] RBP: ffff81005e485f00 R08: 800000007f3c2005 R09:=20 000000000003ccd0 [ 8763.521637] R10: ffff81000250d820 R11: 0000000000000001 R12:=20 ffff81003a3b3820 [ 8763.521638] R13: ffff81007e610f00 R14: ffff810040aeb330 R15:=20 ffff81007e610f00 [ 8763.521640] FS: 00002b2dce7a9140(0000) GS:ffff81007ff3bec0(0000)=20 knlGS:00000000f7b83b80 [ 8763.521642] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 8763.521644] CR2: ffff910073e22db0 CR3: 000000003ba69000 CR4:=20 00000000000006e0 [ 8763.521645] DR0: 0000000000000000 DR1: 0000000000000000 DR2:=20 0000000000000000 [ 8763.521647] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:=20 0000000000000400 [ 8763.521649] Process emerge (pid: 10497, threadinfo ffff81005e184000, tas= k=20 ffff8100580bb080) [ 8763.521650] Stack: ffffffff8026b048 0000000000000001 ffff81005e485f00=20 0000000000000001 [ 8763.521654] ffffffff80230d0c 00002b2dce7a91d0 0000000000000000=20 ffff81005e185f58 [ 8763.521656] 00007fffdc32be90 0000000001200011 0000000000000000=20 ffff81003a3b3820 [ 8763.521658] Call Trace: [ 8763.521662] [] anon_vma_link+0x1a/0x40 [ 8763.521666] [] copy_process+0xb03/0x1301 [ 8763.521671] [] do_fork+0xb1/0x1fc [ 8763.521675] [] system_call+0x7e/0x83 [ 8763.521677] [] ptregscall_common+0x67/0xb0 [ 8763.521681]=20 [ 8763.521682]=20 [ 8763.521682] Code: f0 ff 0f 79 09 f3 90 83 3f 00 7e f9 eb f2 c3 f0 81 2f = 00=20 00=20 [ 8763.521688] RIP [] _spin_lock+0x0/0xf [ 8763.521690] RSP [ 8763.521691] CR2: ffff910073e22db0 sh ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux energy 2.6.23.9reiser4 #4 SMP Sat Dec 15 20:06:33 CET 2007 x86_64 AMD= =20 Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux Gnu C 4.2.2 Gnu make 3.81 binutils Binutils util-linux 2.13 mount 2.13 module-init-tools 3.4 e2fsprogs 1.40.3 reiserfsprogs 3.6.19 reiser4progs 1.0.6 PPP 2.4.4 Linux C Library 2.7 Dynamic linker (ldd) 2.7 Procps 3.2.7 Net-tools 1.60 Kbd 1.13 Sh-utils 6.9 udev 117 Modules Loaded isofs snd_usb_audio snd_usb_lib k8temp w83627ehf=20 hwmon_vid hwmon i2c_core snd_seq_midi snd_emu10k1_synth snd_emux_synth=20 snd_seq_virmidi snd_seq_midi_emul snd_pcm_oss snd_mixer_oss snd_seq_oss=20 snd_seq_midi_event snd_seq snd_emu10k1 snd_rawmidi snd_ac97_codec ac97_bus= =20 snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep snd= =20 r8169 If you need more info, please tell me so. Config is attached because of its= =20 size.=20 Gl=FCck Auf, Volker --Boundary-00=_ovGZHcC5JBYVmHO Content-Type: text/plain; charset="us-ascii"; name=".config" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=".config" # # Automatically generated make config: don't edit # Linux kernel version: 2.6.23.9 # Sat Dec 15 20:05:44 2007 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_ZONE_DMA32=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_DMI=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="reiser4" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set CONFIG_MK8=y # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_NR_CPUS=2 CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_START=0x200000 # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y # # Power management options # CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND_SMP_POSSIBLE=y CONFIG_SUSPEND=y CONFIG_HIBERNATION_SMP_POSSIBLE=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_ACPI_CPUFREQ=y # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=m CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m # CONFIG_BT_BNEP_MC_FILTER is not set # CONFIG_BT_BNEP_PROTO_FILTER is not set CONFIG_BT_HIDP=m # # Bluetooth device drivers # CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUSB_SCO=y CONFIG_BT_HCIUART=m # CONFIG_BT_HCIUART_H4 is not set # CONFIG_BT_HCIUART_BCSP is not set CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=2 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # # Controllers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=m # # Protocols # # CONFIG_IEEE1394_VIDEO1394 is not set # CONFIG_IEEE1394_SBP2 is not set # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_DV1394 is not set CONFIG_IEEE1394_RAWIO=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=m # CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set CONFIG_FIX_EARLYCON_MEM=y # # Non-8250 serial port support # # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_AGP=y CONFIG_AGP_AMD64=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=m # CONFIG_I2C_AMD756_S4882 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_NFORCE2=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set CONFIG_SENSORS_K8TEMP=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set CONFIG_SENSORS_W83627EHF=m # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_TUNER_TEA5761 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_CAFE_CCIC is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set # CONFIG_USB_ET61X251 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # CONFIG_USB_W9968CF is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_ZC0301 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_ZR364XX is not set # CONFIG_RADIO_ADAPTERS is not set CONFIG_DVB_CORE=m # CONFIG_DVB_CORE_ATTACH is not set CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # # CONFIG_DVB_AV7110 is not set # CONFIG_DVB_BUDGET is not set # CONFIG_DVB_BUDGET_CI is not set # CONFIG_DVB_BUDGET_AV is not set # # Supported USB Adapters # # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set # # Supported FlexCopII (B2C2) Adapters # # CONFIG_DVB_B2C2_FLEXCOP is not set # # Supported BT878 Adapters # # # Supported Pluto2 Adapters # # CONFIG_DVB_PLUTO2 is not set # # Supported DVB Frontends # # # Customise DVB Frontends # # CONFIG_DVB_FE_CUSTOMISE is not set # # DVB-S (satellite) frontends # # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set # CONFIG_DVB_TDA10086 is not set # # DVB-T (terrestrial) frontends # # CONFIG_DVB_SP8870 is not set # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set # CONFIG_DVB_MT352 is not set # CONFIG_DVB_ZL10353 is not set # CONFIG_DVB_DIB3000MB is not set # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set # # DVB-C (cable) frontends # # CONFIG_DVB_VES1820 is not set # CONFIG_DVB_TDA10021 is not set # CONFIG_DVB_TDA10023 is not set # CONFIG_DVB_STV0297 is not set # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # # CONFIG_DVB_NXT200X is not set # CONFIG_DVB_OR51211 is not set # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # # Tuners/PLL support # # CONFIG_DVB_PLL is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TDA827X is not set # CONFIG_DVB_TUNER_QT1010 is not set # CONFIG_DVB_TUNER_MT2060 is not set # # Miscellaneous devices # # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6421 is not set # CONFIG_DVB_TUA6100 is not set # CONFIG_DAB is not set # # Graphics support # # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_AC97_POWER_SAVE is not set # # USB devices # CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # # System on Chip audio support # # CONFIG_SND_SOC is not set # # SoC Audio support for SuperH # # # Open Sound System # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # # USB port drivers # # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # # DMA Engine support # # CONFIG_DMA_ENGINE is not set # # DMA Clients # # # DMA Devices # CONFIG_VIRTUALIZATION=y CONFIG_KVM=m # CONFIG_KVM_INTEL is not set CONFIG_KVM_AMD=m # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set CONFIG_FS_MBCACHE=y CONFIG_REISER4_FS=y # CONFIG_REISER4_DEBUG is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=850 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-15" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # # Distributed Lock Manager # # CONFIG_DLM is not set # # Instrumentation Support # # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y --Boundary-00=_ovGZHcC5JBYVmHO-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/