Received-SPF: pass (google.com: domain of linux-kernel+bounces-35693-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Frank Li <Frank.Li@nxp.com>
To: thinh.nguyen@synopsys.com
Cc: Frank.Li@nxp.com,
	balbi@kernel.org,
	devicetree@vger.kernel.org,
	gregkh@linuxfoundation.org,
	imx@lists.linux.dev,
	linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org,
	mark.rutland@arm.com,
	mathias.nyman@intel.com,
	pku.leo@gmail.com,
	ran.wang_1@nxp.com,
	robh+dt@kernel.org,
	sergei.shtylyov@cogentembedded.com
Subject: [PATCH v3 3/3] usb: dwc3: Add workaround for host mode VBUS glitch when boot
Date: Tue, 23 Jan 2024 11:42:41 -0500
Message-Id: <20240123164241.3689109-4-Frank.Li@nxp.com>
In-Reply-To: <20240123164241.3689109-1-Frank.Li@nxp.com>
References: <20240123164241.3689109-1-Frank.Li@nxp.com>
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0:
	=?us-ascii?Q?WcLvwdnCXiYiMTdSuAJ/21nkzdHIXFHFzQk+a6gLxnOYZF3P0uOTErt3cp0/?=
 =?us-ascii?Q?XpdlPvPyRk8HnBchL5LiiR5nPEe5qFwERNIssmyE6Zl1x0tVyvIdEVZAkYAX?=
 =?us-ascii?Q?45bDt6WwMFckTXpRFxhzr4wMFd3Pr6GFR+/JQ32bboizOcNnhT77zYTKQHPs?=
 =?us-ascii?Q?5RB4RJCFs1cCFWBaoEj/42X60u+90Yc/2i8b/Z8wQ8RlO4LDl+89UiMJ4zxq?=
 =?us-ascii?Q?ThTLCtT/Hivqk4hMBGZTxMUK9K3ydlLvzD274356/awDy9jRvXjr5jGfhmgz?=
 =?us-ascii?Q?9j9thk8/cxxD/+wyxkJGkAN6wvXwSTcBPy4T0BnWaGnE1tFpN2vTJaEPv3r2?=
 =?us-ascii?Q?po7oC0yKckGvBaJU3d0luwYh7MEooiAmaZV48ItROrcU5scn5KKUTKA9seoU?=
 =?us-ascii?Q?21qg5dxkFHgRq8t4tnHvf8865NrhRo8cO5VzjerKjjlskgNToK34525R2wgF?=
 =?us-ascii?Q?7foGixzFIfSjAcqOHACpGH92C8XWPmZPiSVkdGLLB8eS2zq2ShrGnoh6vZF/?=
 =?us-ascii?Q?EittMk0rH6HAdnepxqUX0sCdmwcWp9XRZqB6g57z6PwLgYMOiW//NhFGOmEr?=
 =?us-ascii?Q?u/ELnHLGcRolfXRFPkl71vg8bfS35y0D/4zAk+0w6FtRPSMeQ+biDAwMcexL?=
 =?us-ascii?Q?FXTuvdjlOCN30WhNrygUrXFCC+9b2spPajbnfeBTjysMqAy9H4n5zIO2Yptf?=
 =?us-ascii?Q?GcK906yzQCPQg1tDy/jbbMx5BJrx91Sx8PCyxgpwxX/5F/xeE9F7AwlL73Cj?=
 =?us-ascii?Q?UzI3ZFoqAQ+3tlQC1/V2tOFQSVrWc5ZgBDNYzYkr2VZMRWYGyOxCvBg+r+m8?=
 =?us-ascii?Q?+QRE4u9TuQx529CX6Lra6rZ9N/QV/S7KyqAyVl37voAMied+dF3zts4pktKY?=
 =?us-ascii?Q?EvhxLc5gZemNLwVgoElF9fTqRgiotXGv6VLGpkGRttP074ybrJyEZhL2208C?=
 =?us-ascii?Q?fT2hakOCWkOR3N0Rm8V2oOy/EAftdHO3wxgwSbthYhsrK5cK4L8d7zdy7HQS?=
 =?us-ascii?Q?BIfYzwWsZabcXMtsddWuZdnwWim9VI1mhTTOILfGzU6D2UJsFGbf5LnNYKGy?=
 =?us-ascii?Q?SlTSEoKH9YIlMW8dee5bwCCy9ItfsrQVdlhFZOtZ7vPqrIMmrVy43ni+zyW6?=
 =?us-ascii?Q?KOGUH0LXqZXqn3gorwnrSZvulWKsJ1nSB8h87djZ+1u9TVOHi+7N8O0d3sna?=
 =?us-ascii?Q?4NV5S05kAusWQ1QD4wrNF5x61wWWggazoJf0rG5ziP9KI37WwsjIBHRYNSdw?=
 =?us-ascii?Q?wh1YAMqa+eDI5zMyz9Vui/R1Mlvy03CGVtKjhhCJ/+4FPXB0ltqm5bcTxvK1?=
 =?us-ascii?Q?S0EmYwZPcE+3cCHitX1mNf6bzlAQSouPUZknItkGV15YLHlfHu59l9j2S1jh?=
 =?us-ascii?Q?wYRqHNJfUBol5mhrJ7OMwLgGymq5e+vnqxeiHLDLISBrcj16qORlkrItDreW?=
 =?us-ascii?Q?PXtHazohtesOhhmYsKS3PQe8MmZXGF3ohkRx2T4YB8NbLxr4LTKVLP18IGfb?=
 =?us-ascii?Q?6TBXlspxDGo1IaUpYt86wjBaXFp0UZHixXXGSjZ1DSF4aMf5rihlKaUhOSSr?=
 =?us-ascii?Q?lRwyTJ+XW5WXaLzkWug=3D?=
X-OriginatorOrg: nxp.com
X-MS-Exchange-CrossTenant-Network-Message-Id: da837f37-49a5-47b7-b69b-08dc1c3261eb
X-MS-Exchange-CrossTenant-AuthSource: PAXPR04MB9642.eurprd04.prod.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Jan 2024 16:43:09.8964
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: Rwp5+wRMQ6UlU9me3JTZLhv/lkr69UNF3gLbh08Th2VaP8xjPEnc05/xNhT//PB1p+Eg5zRxoPvI+AkzC26FOw==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DBBPR04MB7929

From: Ran Wang <ran.wang_1@nxp.com>

When DWC3 is set to host mode by programming register DWC3_GCTL, VBUS
(or its control signal) will be turned on immediately on related Root Hub
ports. Then, the VBUS is turned off for a little while(15us) when do xhci
reset (conducted by xhci driver) and back to normal finally, we can
observe a negative glitch of related signal happen.

This VBUS glitch might cause some USB devices enumeration fail if kernel
boot with them connected. Such as LS1012AFWRY/LS1043ARDB/LX2160AQDS
/LS1088ARDB with Kingston 16GB USB2.0/Kingston USB3.0/JetFlash Transcend
4GB USB2.0 drives. The fail cases include enumerated as full-speed device
or report wrong device descriptor, etc.

One SW workaround which can fix this is by programing all xhci PORTSC[PP]
to 0 to turn off VBUS immediately after setting host mode in DWC3 driver
(per signal measurement result, it will be too late to do it in
xhci-plat.c or xhci.c). Then, after xhci reset complete in xhci driver,
PORTSC[PP]s' value will back to 1 automatically and VBUS on at that time,
no glitch happen and normal enumeration process has no impact.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v2 to v3
    - reversed christmas tree
    - please move major change hunk to the top
    - Reword "We have to ..." to "Some platforms need to ... "
    
    Change from v1 to v2:
    - split xhci.h
    Last review at June 06, 2019. Fixed all review comments and sent again.
    
    https://lore.kernel.org/linux-kernel/AM5PR0402MB2865979E26017BC5937DBBA5F1170@AM5PR0402MB2865.eurprd04.prod.outlook.com/

 drivers/usb/dwc3/core.c |  3 +++
 drivers/usb/dwc3/core.h |  2 ++
 drivers/usb/dwc3/host.c | 51 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 56 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3e55838c00014..3b68e8e45b8b9 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1626,6 +1626,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	dwc->dis_split_quirk = device_property_read_bool(dev,
 				"snps,dis-split-quirk");
 
+	dwc->host_vbus_glitches_quirk = device_property_read_bool(dev,
+				"snps,host-vbus-glitches-quirk");
+
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index e3eea965e57bf..df544ec730d22 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1132,6 +1132,7 @@ struct dwc3_scratchpad_array {
  *	2	- No de-emphasis
  *	3	- Reserved
  * @dis_metastability_quirk: set to disable metastability quirk.
+ * @host_vbus_glitches_quirk: set to avoid vbus glitch during xhci reset.
  * @dis_split_quirk: set to disable split boundary.
  * @wakeup_configured: set if the device is configured for remote wakeup.
  * @suspended: set to track suspend event due to U3/L2.
@@ -1353,6 +1354,7 @@ struct dwc3 {
 	unsigned		tx_de_emphasis:2;
 
 	unsigned		dis_metastability_quirk:1;
+	unsigned		host_vbus_glitches_quirk:1;
 
 	unsigned		dis_split_quirk:1;
 	unsigned		async_callbacks:1;
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 61f57fe5bb783..952d73d05dffa 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,8 +11,52 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 
+#include "../host/xhci-port.h"
+#include "../host/xhci-ext-caps.h"
+#include "../host/xhci-caps.h"
 #include "core.h"
 
+#define XHCI_HCSPARAMS1		0x4
+#define XHCI_PORTSC_BASE	0x400
+
+/*
+ * dwc3_power_off_all_roothub_ports - Power off all Root hub ports
+ * @dwc3: Pointer to our controller context structure
+ */
+static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
+{
+	void __iomem *xhci_regs;
+	u32 op_regs_base;
+	int port_num;
+	u32 offset;
+	u32 reg;
+	int i;
+
+	/* xhci regs is not mapped yet, do it temperary here */
+	if (dwc->xhci_resources[0].start) {
+		xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
+		if (IS_ERR(xhci_regs)) {
+			dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
+			return;
+		}
+
+		op_regs_base = HC_LENGTH(readl(xhci_regs));
+		reg = readl(xhci_regs + XHCI_HCSPARAMS1);
+		port_num = HCS_MAX_PORTS(reg);
+
+		for (i = 1; i <= port_num; i++) {
+			offset = op_regs_base + XHCI_PORTSC_BASE + 0x10 * (i - 1);
+			reg = readl(xhci_regs + offset);
+			reg &= ~PORT_POWER;
+			writel(reg, xhci_regs + offset);
+		}
+
+		iounmap(xhci_regs);
+	} else {
+		dev_err(dwc->dev, "xhci base reg invalid\n");
+	}
+}
+
 static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
 					int irq, char *name)
 {
@@ -66,6 +110,13 @@ int dwc3_host_init(struct dwc3 *dwc)
 	int			ret, irq;
 	int			prop_idx = 0;
 
+	/*
+	 * Some platforms need to power off all Root hub ports immediately after DWC3 set to host
+	 * mode to avoid VBUS glitch happen when xhci get reset later.
+	 */
+	if (dwc->host_vbus_glitches_quirk)
+		dwc3_power_off_all_roothub_ports(dwc);
+
 	irq = dwc3_host_get_irq(dwc);
 	if (irq < 0)
 		return irq;
-- 
2.34.1