Received-SPF: pass (google.com: domain of linux-kernel+bounces-35914-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: =?utf-8?q?Th=C3=A9o_Lebrun?= <theo.lebrun@bootlin.com>
Date: Tue, 23 Jan 2024 19:47:02 +0100
Subject: [PATCH v3 17/17] MIPS: mobileye: eyeq5: add pinctrl properties to
 UART nodes
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Message-Id: <20240123-mbly-clk-v3-17-392b010b8281@bootlin.com>
References: <20240123-mbly-clk-v3-0-392b010b8281@bootlin.com>
In-Reply-To: <20240123-mbly-clk-v3-0-392b010b8281@bootlin.com>
To: Gregory CLEMENT <gregory.clement@bootlin.com>, 
 Michael Turquette <mturquette@baylibre.com>, 
 Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Conor Dooley <conor+dt@kernel.org>, 
 Thomas Bogendoerfer <tsbogend@alpha.franken.de>, 
 Linus Walleij <linus.walleij@linaro.org>, 
 =?utf-8?q?Rafa=C5=82_Mi=C5=82ecki?= <rafal@milecki.pl>, 
 Philipp Zabel <p.zabel@pengutronix.de>
Cc: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>, 
 linux-mips@vger.kernel.org, linux-clk@vger.kernel.org, 
 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, 
 Thomas Petazzoni <thomas.petazzoni@bootlin.com>, 
 Tawfik Bayouk <tawfik.bayouk@mobileye.com>, linux-gpio@vger.kernel.org, 
 =?utf-8?q?Th=C3=A9o_Lebrun?= <theo.lebrun@bootlin.com>

UART nodes are present in the platform devicetree. Add pinctrl to them
now that the pin controller is supported.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 05987c58ed73..bf06d7a801a2 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -79,6 +79,8 @@ uart0: serial@800000 {
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
 			resets = <&reset 0 10>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
 		};
 
 		uart1: serial@900000 {
@@ -90,6 +92,8 @@ uart1: serial@900000 {
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
 			resets = <&reset 0 11>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
 		};
 
 		uart2: serial@a00000 {
@@ -101,6 +105,8 @@ uart2: serial@a00000 {
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
 			resets = <&reset 0 12>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
 		};
 
 		olb: system-controller@e00000 {

-- 
2.43.0