Received-SPF: pass (google.com: domain of linux-kernel+bounces-37013-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	kernel@pengutronix.de,
	linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	NXP Linux Team <linux-imx@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	=?UTF-8?q?S=C3=B8ren=20Andersen?= <san@skov.dk>
Subject: [PATCH v1 1/1] ARM: dts: imx6: skov: add aliases for all ethernet nodes
Date: Wed, 24 Jan 2024 13:44:55 +0100
Message-Id: <20240124124455.738187-1-o.rempel@pengutronix.de>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Add aliases for all ethernet nodes including the switch. It makes it
easier to find this nodes by the boot loader.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
index 2731faede1cb..d59d5d0e1d19 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -13,10 +13,14 @@ chosen {
 	aliases {
 		can0 = &can1;
 		can1 = &can2;
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
 		mdio-gpio0 = &mdio;
 		nand = &gpmi;
 		rtc0 = &i2c_rtc;
 		rtc1 = &snvs;
+		switch0 = &switch;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
 	};
@@ -60,7 +64,7 @@ mdio: mdio {
 		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
 			<&gpio1 22 GPIO_ACTIVE_HIGH>;
 
-		switch@0 {
+		switch: switch@0 {
 			compatible = "microchip,ksz8873";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -73,13 +77,13 @@ ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				ports@0 {
+				lan1: ports@0 {
 					reg = <0>;
 					phy-mode = "internal";
 					label = "lan1";
 				};
 
-				ports@1 {
+				lan2: ports@1 {
 					reg = <1>;
 					phy-mode = "internal";
 					label = "lan2";
-- 
2.39.2