Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id <S129719AbQJZW0H>; Thu, 26 Oct 2000 18:26:07 -0400
Received: (majordomo@vger.kernel.org) by vger.kernel.org
	id <S129726AbQJZWZ6>; Thu, 26 Oct 2000 18:25:58 -0400
Received: from lolita.speakeasy.net ([216.254.0.13]:41491 "HELO
	lolita.speakeasy.net") by vger.kernel.org with SMTP
	id <S129719AbQJZWZi>; Thu, 26 Oct 2000 18:25:38 -0400
Message-ID: <39F8ADF0.5050400@speakeasy.org>
Date: Thu, 26 Oct 2000 15:19:28 -0700
From: Miles Lane <miles@speakeasy.org>
User-Agent: Mozilla/5.0 (X11; U; Linux 2.4.0-test9 i686; en-US; m18) Gecko/20001025
X-Accept-Language: en
MIME-Version: 1.0
To: linux-kernel@vger.kernel.org
Subject: test10-pre5 won't boot on my Athlon machine (Irongate and Viper chip sets)
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org

Perhaps this is related to the PCI issues that are being debated on the list now.
Would someone look at my bus configuration and let me know what to test or what patch to apply to get my kernel booting?

lspci -vv reports:

00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64 set
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Region 1: Memory at fc9ff000 (32-bit, prefetchable) [size=4K]
	Region 2: I/O ports at ffe4 [disabled] [size=4]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 set
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fca00000-feafffff
	Prefetchable memory behind bridge: e4800000-f48fffff
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set

00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev 03) (prog-if 8a [Master SecP PriP])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 set
	Region 4: I/O ports at cb00 [size=16]

00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (rev 06) (prog-if 10 [OHCI])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 80 max, 16 set, cache line size 08
	Interrupt: pin D routed to IRQ 10
	Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]

00:0f.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)
	Subsystem: Adaptec: Unknown device 3869
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 4 min, 4 max, 64 set, cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at f800 [size=256]
	Region 1: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at febe0000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:12.0 Communication controller: Lucent Microelectronics Venus WinModem (V90, 56KFlex)
	Subsystem: Action Tec Electronics Inc: Unknown device 0500
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 252 min, 14 max, 0 set
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at febfdf00 (32-bit, non-prefetchable) [size=256]
	Region 1: I/O ports at f400 [size=256]
	Region 2: I/O ports at f000 [size=256]
	Region 3: I/O ports at ffa8 [size=8]
	Capabilities: [f8] Power Management version 2
		Flags: PMEClk- AuxPwr- DSI+ D1- D2+ PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:13.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 78)
	Subsystem: 3Com Corporation: Unknown device 1000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 10 min, 10 max, 64 set, cache line size 08
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at fc00 [size=128]
	Region 1: Memory at febfde80 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at febc0000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME+
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:14.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 07)
	Subsystem: Creative Labs CT4831 SBLive! Value
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 2 min, 20 max, 64 set
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at ff80 [size=32]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:14.1 Input device controller: Creative Labs SB Live! (rev 07)
	Subsystem: Creative Labs Gameport Joystick
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 set
	Region 0: I/O ports at fff0 [size=8]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:05.0 VGA compatible controller: nVidia Corporation: Unknown device 0101 (rev 10) (prog-if 00 [VGA])
	Subsystem: VISIONTEK: Unknown device 000b
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 5 min, 1 max, 64 set
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at feaf0000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 2.0
		Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/