Received-SPF: pass (google.com: domain of linux-kernel+bounces-39375-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
Message-ID: <a5b37e23-5f88-4a23-a1e3-908513a64f03@arinc9.com>
Date: Fri, 26 Jan 2024 01:48:54 +0300
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH net-next v3 6/7] net: dsa: mt7530: do not set
 priv->p5_interface on mt7530_setup_port5()
Content-Language: en-US
To: Daniel Golle <daniel@makrotopia.org>,
 Landen Chao <Landen.Chao@mediatek.com>, DENG Qingfang <dqfext@gmail.com>,
 Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
 Florian Fainelli <f.fainelli@gmail.com>, Vladimir Oltean
 <olteanv@gmail.com>, "David S. Miller" <davem@davemloft.net>,
 Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>,
 Paolo Abeni <pabeni@redhat.com>, Matthias Brugger <matthias.bgg@gmail.com>,
 AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
 Russell King <linux@armlinux.org.uk>
Cc: mithat.guner@xeront.com, erkin.bozoglu@xeront.com,
 Bartel Eerdekens <bartel.eerdekens@constell8.be>, netdev@vger.kernel.org,
 linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
 linux-mediatek@lists.infradead.org
References: <20240122-for-netnext-mt7530-improvements-1-v3-0-042401f2b279@arinc9.com>
 <20240122-for-netnext-mt7530-improvements-1-v3-6-042401f2b279@arinc9.com>
From: =?UTF-8?B?QXLEsW7DpyDDnE5BTA==?= <arinc.unal@arinc9.com>
In-Reply-To: <20240122-for-netnext-mt7530-improvements-1-v3-6-042401f2b279@arinc9.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit

Vladimir could you review this too? This is the only patch remaining
without a review or ACK.

Arınç

On 22.01.2024 08:35, Arınç ÜNAL via B4 Relay wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> Running mt7530_setup_port5() from mt7530_setup() used to handle all cases
> of configuring port 5, including phylink.
> 
> Setting priv->p5_interface under mt7530_setup_port5() makes sure that
> mt7530_setup_port5() from mt753x_phylink_mac_config() won't run.
> 
> The commit ("net: dsa: mt7530: improve code path for setting up port 5")
> makes so that mt7530_setup_port5() from mt7530_setup() runs only on
> non-phylink cases.
> 
> Get rid of unnecessarily setting priv->p5_interface under
> mt7530_setup_port5() as port 5 phylink configuration will be done by
> running mt7530_setup_port5() from mt753x_phylink_mac_config() now.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
>   drivers/net/dsa/mt7530.c | 2 --
>   1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 33c15f10de34..5394d8c6a40e 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -978,8 +978,6 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
>   	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
>   		val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
>   
> -	priv->p5_interface = interface;
> -
>   unlock_exit:
>   	mutex_unlock(&priv->reg_mutex);
>   }
>