Received-SPF: pass (google.com: domain of linux-kernel+bounces-39515-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Message-ID: <8995bd46-4e1f-8f79-ba22-c5f37b610fcd@quicinc.com>
Date: Thu, 25 Jan 2024 17:46:07 -0800
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: [PATCH v3 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010
 regulators
Content-Language: en-US
To: <quic_fenglinw@quicinc.com>, <kernel@quicinc.com>,
        Bjorn Andersson
	<andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring
	<robh+dt@kernel.org>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>
CC: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
References: <20240125-sm8650_pm8010_support-v3-0-2f291242a7c4@quicinc.com>
 <20240125-sm8650_pm8010_support-v3-1-2f291242a7c4@quicinc.com>
From: David Collins <quic_collinsd@quicinc.com>
In-Reply-To: <20240125-sm8650_pm8010_support-v3-1-2f291242a7c4@quicinc.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit

On 1/25/24 01:31, Fenglin Wu via B4 Relay wrote:
> From: Fenglin Wu <quic_fenglinw@quicinc.com>
> 
> Add PM8010 regulator device nodes for sm8650-mtp board.
> 
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 132 ++++++++++++++++++++++++++++++++
>  1 file changed, 132 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> index 9d916edb1c73..e440c28e5e9f 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> @@ -428,6 +428,138 @@ vreg_l3i_1p2: ldo3 {
>  						   RPMH_REGULATOR_MODE_HPM>;
>  		};
>  	};
> +
> +	regulators-6 {
> +		compatible = "qcom,pm8010-rpmh-regulators";
> +		qcom,pmic-id = "m";
> +
> +		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
> +		vdd-l3-l4-supply = <&vreg_bob2>;
> +		vdd-l5-supply = <&vreg_s6c_1p8>;
> +		vdd-l6-supply = <&vreg_bob1>;
> +		vdd-l7-supply = <&vreg_bob1>;
> +
> +		vreg_l1m_1p1: ldo1 {
> +			regulator-name = "vreg_l1m_1p1";
> +			regulator-min-microvolt = <1104000>;
> +			regulator-max-microvolt = <1104000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> +						   RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2m_1p056: ldo2 {
> +			regulator-name = "vreg_l2m_1p056";
> +			regulator-min-microvolt = <1056000>;
> +			regulator-max-microvolt = <1056000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> +						   RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3m_2p8: ldo3 {
> +			regulator-name = "vreg_l3m_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l4m_2p8: ldo4 {
> +			regulator-name = "vreg_l4m_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l5m_1p8: ldo5 {
> +			regulator-name = "vreg_l5m_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6m_2p8: ldo6 {
> +			regulator-name = "vreg_l6m_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7m_2p96: ldo7 {
> +			regulator-name = "vreg_l7m_2p96";
> +			regulator-min-microvolt = <2960000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	regulators-7 {
> +		compatible = "qcom,pm8010-rpmh-regulators";
> +		qcom,pmic-id = "n";
> +
> +		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
> +		vdd-l3-l4-supply = <&vreg_s6c_1p8>;
> +		vdd-l5-supply = <&vreg_bob2>;
> +		vdd-l6-supply = <&vreg_bob2>;
> +		vdd-l7-supply = <&vreg_bob1>;
> +
> +		vreg_l1n_1p1: ldo1 {
> +			regulator-name = "vreg_l1n_1p1";
> +			regulator-min-microvolt = <1104000>;
> +			regulator-max-microvolt = <1104000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> +						   RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l2n_1p056: ldo2 {
> +			regulator-name = "vreg_l2n_1p056";
> +			regulator-min-microvolt = <1056000>;
> +			regulator-max-microvolt = <1056000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;
> +			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> +						   RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3n_1p8: ldo3 {
> +			regulator-name = "vreg_l3n_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l4n_1p8: ldo4 {
> +			regulator-name = "vreg_l4n_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l5n_2p8: ldo5 {
> +			regulator-name = "vreg_l5n_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6n_2p8: ldo6 {
> +			regulator-name = "vreg_l6n_2p8";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7n_3p3: ldo7 {
> +			regulator-name = "vreg_l7n_3p3";
> +			regulator-min-microvolt = <3304000>;
> +			regulator-max-microvolt = <3304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
>  };
>  
>  &dispcc {
> 

Reviewed-by: David Collins <quic_collinsd@quicinc.com>