Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933652AbXLQVWr (ORCPT ); Mon, 17 Dec 2007 16:22:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1759223AbXLQVWi (ORCPT ); Mon, 17 Dec 2007 16:22:38 -0500 Received: from g4t0015.houston.hp.com ([15.201.24.18]:46159 "EHLO g4t0015.houston.hp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758968AbXLQVWh (ORCPT ); Mon, 17 Dec 2007 16:22:37 -0500 X-Greylist: delayed 458 seconds by postgrey-1.27 at vger.kernel.org; Mon, 17 Dec 2007 16:22:37 EST Message-Id: <20071217211337.545932066@ldl.fc.hp.com> References: <20071217210937.103111394@ldl.fc.hp.com> User-Agent: quilt/0.45-1 Date: Mon, 17 Dec 2007 14:09:40 -0700 From: bjorn.helgaas@hp.com To: Andrew Morton Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Greg Kroah-Hartman Cc: David Brownell Cc: linux-kernel@vger.kernel.org Cc: linux-pci@atrey.karlin.mff.cuni.cz Subject: [patch 3/3] PCI: use dev_printk in x86 quirk messages Content-Disposition: inline; filename=x86-pci-quirk Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8049 Lines: 235 Convert quirk printks to dev_printk(). Signed-off-by: Bjorn Helgaas --- arch/x86/kernel/quirks.c | 42 ++++++++++++++++++++++-------------------- arch/x86/pci/fixup.c | 22 +++++++++++----------- 2 files changed, 33 insertions(+), 31 deletions(-) Index: w/arch/x86/kernel/quirks.c =================================================================== --- w.orig/arch/x86/kernel/quirks.c 2007-12-17 13:56:46.000000000 -0700 +++ w/arch/x86/kernel/quirks.c 2007-12-17 14:09:18.000000000 -0700 @@ -30,8 +30,8 @@ raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word); if (!(word & (1 << 13))) { - printk(KERN_INFO "Intel E7520/7320/7525 detected. " - "Disabling irq balancing and affinity\n"); + dev_info(&dev->dev, "Intel E7520/7320/7525 detected; " + "disabling irq balancing and affinity\n"); #ifdef CONFIG_IRQBALANCE irqbalance_disable(""); #endif @@ -104,14 +104,16 @@ pci_read_config_dword(dev, 0xF0, &rcba); rcba &= 0xFFFFC000; if (rcba == 0) { - printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n"); + dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; " + "cannot force enable HPET\n"); return; } /* use bits 31:14, 16 kB aligned */ rcba_base = ioremap_nocache(rcba, 0x4000); if (rcba_base == NULL) { - printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n"); + dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; " + "cannot force enable HPET\n"); return; } @@ -122,8 +124,8 @@ /* HPET is enabled in HPTC. Just not reported by BIOS */ val = val & 0x3; force_hpet_address = 0xFED00000 | (val << 12); - printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", - force_hpet_address); + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); iounmap(rcba_base); return; } @@ -142,11 +144,12 @@ if (err) { force_hpet_address = 0; iounmap(rcba_base); - printk(KERN_DEBUG "Failed to force enable HPET\n"); + dev_printk(KERN_DEBUG, &dev->dev, + "Failed to force enable HPET\n"); } else { force_hpet_resume_type = ICH_FORCE_HPET_RESUME; - printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", - force_hpet_address); + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); } } @@ -206,8 +209,8 @@ if (val & 0x4) { val &= 0x3; force_hpet_address = 0xFED00000 | (val << 12); - printk(KERN_DEBUG "HPET at base address 0x%lx\n", - force_hpet_address); + dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n", + force_hpet_address); return; } @@ -227,14 +230,14 @@ /* HPET is enabled in HPTC. Just not reported by BIOS */ val &= 0x3; force_hpet_address = 0xFED00000 | (val << 12); - printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", - force_hpet_address); + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); cached_dev = dev; force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME; return; } - printk(KERN_DEBUG "Failed to force enable HPET\n"); + dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n"); } /* @@ -292,8 +295,8 @@ */ if (val & 0x80) { force_hpet_address = (val & ~0x3ff); - printk(KERN_DEBUG "HPET at base address 0x%lx\n", - force_hpet_address); + dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n", + force_hpet_address); return; } @@ -307,14 +310,14 @@ pci_read_config_dword(dev, 0x68, &val); if (val & 0x80) { force_hpet_address = (val & ~0x3ff); - printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", - force_hpet_address); + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); cached_dev = dev; force_hpet_resume_type = VT8237_FORCE_HPET_RESUME; return; } - printk(KERN_DEBUG "Failed to force enable HPET\n"); + dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, @@ -342,7 +345,7 @@ pci_read_config_dword(dev, 0x44, &val); force_hpet_address = val & 0xfffffffe; force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME; - printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n", + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", force_hpet_address); cached_dev = dev; return; Index: w/arch/x86/pci/fixup.c =================================================================== --- w.orig/arch/x86/pci/fixup.c 2007-12-17 13:56:46.000000000 -0700 +++ w/arch/x86/pci/fixup.c 2007-12-17 14:09:18.000000000 -0700 @@ -17,7 +17,7 @@ int pxb, reg; u8 busno, suba, subb; - printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d)); + dev_warn(&d->dev, "Searching for i450NX host bridges\n"); reg = 0xd0; for(pxb=0; pxb<2; pxb++) { pci_read_config_byte(d, reg++, &busno); @@ -41,7 +41,7 @@ */ u8 busno; pci_read_config_byte(d, 0x4a, &busno); - printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno); + dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno); pci_scan_bus_with_sysdata(busno); pcibios_last_bus = -1; } @@ -55,7 +55,7 @@ */ int i; - printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d)); + dev_warn(&d->dev, "Fixing base address flags\n"); for(i=0; i<4; i++) d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; } @@ -68,7 +68,7 @@ * Fix class to be PCI_CLASS_STORAGE_SCSI */ if (!d->class) { - printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d)); + dev_warn(&d->dev, "Fixing NCR 53C810 class code\n"); d->class = PCI_CLASS_STORAGE_SCSI << 8; } } @@ -80,7 +80,7 @@ * SiS 5597 and 5598 chipsets require latency timer set to * at most 32 to avoid lockups. */ - DBG("PCI: Setting max latency to 32\n"); + dev_dbg(&d->dev, "Setting max latency to 32\n"); pcibios_max_latency = 32; } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); @@ -138,7 +138,7 @@ pci_read_config_byte(d, where, &v); if (v & ~mask) { - printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ + dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ d->device, d->revision, where, v, mask, v & mask); v &= mask; pci_write_config_byte(d, where, v); @@ -200,7 +200,7 @@ * Apply fixup if needed, but don't touch disconnect state */ if ((val & 0x00FF0000) != 0x00010000) { - printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n"); + dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n"); pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000); } } @@ -348,7 +348,7 @@ pci_read_config_word(pdev, PCI_COMMAND, &config); if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); + dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); } } DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); @@ -388,11 +388,11 @@ /* verify the change for status output */ pci_read_config_byte(dev, 0x50, &val); if (val & 0x40) - printk(KERN_INFO "PCI: Detected MSI K8T Neo2-FIR, " + dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " "can't enable onboard soundcard!\n"); else - printk(KERN_INFO "PCI: Detected MSI K8T Neo2-FIR, " - "enabled onboard soundcard.\n"); + dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " + "enabled onboard soundcard\n"); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/