Received-SPF: pass (google.com: domain of linux-kernel+bounces-41244-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: linux-amarula@amarulasolutions.com,
	Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>,
	Lee Jones <lee@kernel.org>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Dario Binacchi <dario.binacchi@amarulasolutions.com>,
	Andre Przywara <andre.przywara@arm.com>,
	Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	=?UTF-8?q?Leonard=20G=C3=B6hrs?= <l.goehrs@pengutronix.de>,
	Linus Walleij <linus.walleij@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sean Nyekjaer <sean@geanix.com>,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH v10 0/5] Add display support for stm32f769-disco board
Date: Sat, 27 Jan 2024 16:28:44 +0100
Message-ID: <20240127152853.65937-1-dario.binacchi@amarulasolutions.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

The series adds display support for the stm32f769-disco board. It has been
tested on hardware revisions MB1225-B03 and MB1166-A09. This required
modifications to the nt35510 driver that have already been applied.

Changes in v10:
- Drop backlight. From a closer analysis of the schematics
  en.MB1225-F769I-B01_Schematic.pdf and en.mb1166-default-a09-schematic.pdf,
  it is noticed that the GPIO I14 is connected to an unmounted
  resistor (n/a), making the backlight functionality via GPIO unusable.
- Drop backlight references

Changes in v9:
- Drop 'interrupts' property to fix yaml checks
- Rename vcc_3v3 to to vcc-3v3
- Rename panel-dsi@0 to panel@0 to fix yaml warnings
- Change commit message
- Rename stm32f769-disco-mb1225-revb03-mb1166-reva09 to
  stm32f769-disco-mb1166-reva09

Changes in v8:
- Add Acked-by tag of Lee Jones
- Add Reviewed-by tag of Raphael Gallais-Pou
- Add Reviewed-by tag of Raphael Gallais-Pou
- Remove unit name from 'ltdc/port/endpoint@0' to fix the compiling
  warning:
  ../arch/arm/boot/dts/st/stm32f769-disco.dts:189.28-191.5: Warning
  (unit_address_vs_reg): /soc/display-controller@40016800/port/endpoint@0: node
  has a unit name, but no reg or ranges property
- Add Reviewed-by tag of Linus Walleij
- Add Reviewed-by tag of Raphael Gallais-Pou

Changes in v7:
- Replace .dts with .dtb in the Makefile

Changes in v6:
- Drop patches
  - [5/8] dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK
  - [7/8] drm/panel: nt35510: move hardwired parameters to configuration
  - [8/8] drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK
  because applied by the maintainer Linus Walleij

Changes in v5:
- Replace GPIOD_ASIS with GPIOD_OUT_HIGH in the call to devm_gpiod_get_optional().

Changes in v2:
- Add Acked-by tag of Conor Dooley
- Change the status of panel_backlight node to "disabled"
- Delete backlight property from panel0 node.
- Re-write the patch [8/8] "drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK"
  in the same style as the original driver.

Dario Binacchi (5):
  dt-bindings: mfd: stm32f7: Add binding definition for DSI
  ARM: dts: stm32: add DSI support on stm32f769
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
  ARM: dts: stm32: add display support on stm32f769-disco
  ARM: dts: add stm32f769-disco-mb1166-reva09

 arch/arm/boot/dts/st/Makefile                 |  1 +
 .../dts/st/stm32f769-disco-mb1166-reva09.dts  | 13 ++++
 arch/arm/boot/dts/st/stm32f769-disco.dts      | 70 +++++++++++++++++--
 arch/arm/boot/dts/st/stm32f769.dtsi           | 20 ++++++
 include/dt-bindings/mfd/stm32f7-rcc.h         |  1 +
 5 files changed, 101 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
 create mode 100644 arch/arm/boot/dts/st/stm32f769.dtsi

-- 
2.43.0