Received-SPF: pass (google.com: domain of linux-kernel+bounces-42743-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Abel Vesa <abel.vesa@linaro.org>
Date: Mon, 29 Jan 2024 15:03:24 +0200
Subject: [PATCH v3] phy: qualcomm: eusb2-repeater: Rework init to drop
 redundant zero-out loop
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240129-phy-qcom-eusb2-repeater-fixes-v3-1-9a61ef3490de@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>, 
 Konrad Dybcio <konrad.dybcio@linaro.org>, Vinod Koul <vkoul@kernel.org>, 
 Kishon Vijay Abraham I <kishon@kernel.org>
Cc: Elliot Berman <quic_eberman@quicinc.com>, 
 Dmitry Baryshkov <dmitry.baryshkov@linaro.org>, 
 linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, 
 linux-kernel@vger.kernel.org, Abel Vesa <abel.vesa@linaro.org>

The device match config init table already has zero values, so rework
the container struct to hold a copy of the init table that can be
override be the DT specified values. By doing this, only the number of
vregs remain in the device match config that will be later needed, so
instead of holding the cfg after probe, store the number of vregs in the
container struct.

Fixes: 99a517a582fc ("phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v3:
- Reworked so that it uses base + reg-index.
- Link to v2: https://lore.kernel.org/r/20240105-phy-qcom-eusb2-repeater-fixes-v2-0-775d98e7df05@linaro.org

Changes in v2:
- The regfields is being dropped from the repeater init, but it's done
  in the second patch in order to not break bisectability, as it is
  still needed by the zero-out loop.
- Added Konrad's R-b tag to the first patch. Did not add Elliot's T-b
  tag as the second patch has been reworked massively.
- The zero-out loop is dropped now by holding a copy of the init_tlb in
  the container struct. This led to dropping the cfg from the container
  struct (see second patch commit message for more details).
- Link to v1: https://lore.kernel.org/r/20240104-phy-qcom-eusb2-repeater-fixes-v1-0-047b7b6b8333@linaro.org
---
 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c | 166 +++++++++----------------
 1 file changed, 62 insertions(+), 104 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index a623f092b11f..a43e20abb10d 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -37,56 +37,28 @@
 #define EUSB2_TUNE_EUSB_EQU		0x5A
 #define EUSB2_TUNE_EUSB_HS_COMP_CUR	0x5B
 
-#define QCOM_EUSB2_REPEATER_INIT_CFG(r, v)	\
-	{					\
-		.reg = r,			\
-		.val = v,			\
-	}
-
-enum reg_fields {
-	F_TUNE_EUSB_HS_COMP_CUR,
-	F_TUNE_EUSB_EQU,
-	F_TUNE_EUSB_SLEW,
-	F_TUNE_USB2_HS_COMP_CUR,
-	F_TUNE_USB2_PREEM,
-	F_TUNE_USB2_EQU,
-	F_TUNE_USB2_SLEW,
-	F_TUNE_SQUELCH_U,
-	F_TUNE_HSDISC,
-	F_TUNE_RES_FSDIF,
-	F_TUNE_IUSB2,
-	F_TUNE_USB2_CROSSOVER,
-	F_NUM_TUNE_FIELDS,
-
-	F_FORCE_VAL_5 = F_NUM_TUNE_FIELDS,
-	F_FORCE_EN_5,
-
-	F_EN_CTL1,
-
-	F_RPTR_STATUS,
-	F_NUM_FIELDS,
-};
-
-static struct reg_field eusb2_repeater_tune_reg_fields[F_NUM_FIELDS] = {
-	[F_TUNE_EUSB_HS_COMP_CUR] = REG_FIELD(EUSB2_TUNE_EUSB_HS_COMP_CUR, 0, 1),
-	[F_TUNE_EUSB_EQU] = REG_FIELD(EUSB2_TUNE_EUSB_EQU, 0, 1),
-	[F_TUNE_EUSB_SLEW] = REG_FIELD(EUSB2_TUNE_EUSB_SLEW, 0, 1),
-	[F_TUNE_USB2_HS_COMP_CUR] = REG_FIELD(EUSB2_TUNE_USB2_HS_COMP_CUR, 0, 1),
-	[F_TUNE_USB2_PREEM] = REG_FIELD(EUSB2_TUNE_USB2_PREEM, 0, 2),
-	[F_TUNE_USB2_EQU] = REG_FIELD(EUSB2_TUNE_USB2_EQU, 0, 1),
-	[F_TUNE_USB2_SLEW] = REG_FIELD(EUSB2_TUNE_USB2_SLEW, 0, 1),
-	[F_TUNE_SQUELCH_U] = REG_FIELD(EUSB2_TUNE_SQUELCH_U, 0, 2),
-	[F_TUNE_HSDISC] = REG_FIELD(EUSB2_TUNE_HSDISC, 0, 2),
-	[F_TUNE_RES_FSDIF] = REG_FIELD(EUSB2_TUNE_RES_FSDIF, 0, 2),
-	[F_TUNE_IUSB2] = REG_FIELD(EUSB2_TUNE_IUSB2, 0, 3),
-	[F_TUNE_USB2_CROSSOVER] = REG_FIELD(EUSB2_TUNE_USB2_CROSSOVER, 0, 2),
-
-	[F_FORCE_VAL_5] = REG_FIELD(EUSB2_FORCE_VAL_5, 0, 7),
-	[F_FORCE_EN_5] = REG_FIELD(EUSB2_FORCE_EN_5, 0, 7),
-
-	[F_EN_CTL1] = REG_FIELD(EUSB2_EN_CTL1, 0, 7),
-
-	[F_RPTR_STATUS] = REG_FIELD(EUSB2_RPTR_STATUS, 0, 7),
+enum eusb2_reg_layout {
+	TUNE_EUSB_HS_COMP_CUR,
+	TUNE_EUSB_EQU,
+	TUNE_EUSB_SLEW,
+	TUNE_USB2_HS_COMP_CUR,
+	TUNE_USB2_PREEM,
+	TUNE_USB2_EQU,
+	TUNE_USB2_SLEW,
+	TUNE_SQUELCH_U,
+	TUNE_HSDISC,
+	TUNE_RES_FSDIF,
+	TUNE_IUSB2,
+	TUNE_USB2_CROSSOVER,
+	NUM_TUNE_FIELDS,
+
+	FORCE_VAL_5 = NUM_TUNE_FIELDS,
+	FORCE_EN_5,
+
+	EN_CTL1,
+
+	RPTR_STATUS,
+	LAYOUT_SIZE,
 };
 
 struct eusb2_repeater_cfg {
@@ -98,10 +70,11 @@ struct eusb2_repeater_cfg {
 
 struct eusb2_repeater {
 	struct device *dev;
-	struct regmap_field *regs[F_NUM_FIELDS];
+	struct regmap *regmap;
 	struct phy *phy;
 	struct regulator_bulk_data *vregs;
 	const struct eusb2_repeater_cfg *cfg;
+	u32 base;
 	enum phy_mode mode;
 };
 
@@ -109,10 +82,10 @@ static const char * const pm8550b_vreg_l[] = {
 	"vdd18", "vdd3",
 };
 
-static const u32 pm8550b_init_tbl[F_NUM_TUNE_FIELDS] = {
-	[F_TUNE_IUSB2] = 0x8,
-	[F_TUNE_SQUELCH_U] = 0x3,
-	[F_TUNE_USB2_PREEM] = 0x5,
+static const u32 pm8550b_init_tbl[NUM_TUNE_FIELDS] = {
+	[TUNE_IUSB2] = 0x8,
+	[TUNE_SQUELCH_U] = 0x3,
+	[TUNE_USB2_PREEM] = 0x5,
 };
 
 static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = {
@@ -140,47 +113,42 @@ static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr)
 
 static int eusb2_repeater_init(struct phy *phy)
 {
-	struct reg_field *regfields = eusb2_repeater_tune_reg_fields;
 	struct eusb2_repeater *rptr = phy_get_drvdata(phy);
 	struct device_node *np = rptr->dev->of_node;
-	u32 init_tbl[F_NUM_TUNE_FIELDS] = { 0 };
-	u8 override;
+	struct regmap *regmap = rptr->regmap;
+	const u32 *init_tbl = rptr->cfg->init_tbl;
+	u8 tune_usb2_preem = init_tbl[TUNE_USB2_PREEM];
+	u8 tune_hsdisc = init_tbl[TUNE_HSDISC];
+	u8 tune_iusb2 = init_tbl[TUNE_IUSB2];
+	u32 base = rptr->base;
 	u32 val;
 	int ret;
-	int i;
+
+	of_property_read_u8(np, "qcom,tune-usb2-amplitude", &tune_iusb2);
+	of_property_read_u8(np, "qcom,tune-usb2-disc-thres", &tune_hsdisc);
+	of_property_read_u8(np, "qcom,tune-usb2-preem", &tune_usb2_preem);
 
 	ret = regulator_bulk_enable(rptr->cfg->num_vregs, rptr->vregs);
 	if (ret)
 		return ret;
 
-	regmap_field_update_bits(rptr->regs[F_EN_CTL1], EUSB2_RPTR_EN, EUSB2_RPTR_EN);
+	regmap_write(regmap, base + EUSB2_EN_CTL1, EUSB2_RPTR_EN);
 
-	for (i = 0; i < F_NUM_TUNE_FIELDS; i++) {
-		if (init_tbl[i]) {
-			regmap_field_update_bits(rptr->regs[i], init_tbl[i], init_tbl[i]);
-		} else {
-			/* Write 0 if there's no value set */
-			u32 mask = GENMASK(regfields[i].msb, regfields[i].lsb);
-
-			regmap_field_update_bits(rptr->regs[i], mask, 0);
-		}
-	}
-	memcpy(init_tbl, rptr->cfg->init_tbl, sizeof(init_tbl));
+	regmap_write(regmap, base + EUSB2_TUNE_EUSB_HS_COMP_CUR, init_tbl[TUNE_EUSB_HS_COMP_CUR]);
+	regmap_write(regmap, base + EUSB2_TUNE_EUSB_EQU, init_tbl[TUNE_EUSB_EQU]);
+	regmap_write(regmap, base + EUSB2_TUNE_EUSB_SLEW, init_tbl[TUNE_EUSB_SLEW]);
+	regmap_write(regmap, base + EUSB2_TUNE_USB2_HS_COMP_CUR, init_tbl[TUNE_USB2_HS_COMP_CUR]);
+	regmap_write(regmap, base + EUSB2_TUNE_USB2_EQU, init_tbl[TUNE_USB2_EQU]);
+	regmap_write(regmap, base + EUSB2_TUNE_USB2_SLEW, init_tbl[TUNE_USB2_SLEW]);
+	regmap_write(regmap, base + EUSB2_TUNE_SQUELCH_U, init_tbl[TUNE_SQUELCH_U]);
+	regmap_write(regmap, base + EUSB2_TUNE_RES_FSDIF, init_tbl[TUNE_RES_FSDIF]);
+	regmap_write(regmap, base + EUSB2_TUNE_USB2_CROSSOVER, init_tbl[TUNE_USB2_CROSSOVER]);
 
-	if (!of_property_read_u8(np, "qcom,tune-usb2-amplitude", &override))
-		init_tbl[F_TUNE_IUSB2] = override;
+	regmap_write(regmap, base + EUSB2_TUNE_USB2_PREEM, tune_usb2_preem);
+	regmap_write(regmap, base + EUSB2_TUNE_HSDISC, tune_hsdisc);
+	regmap_write(regmap, base + EUSB2_TUNE_IUSB2, tune_iusb2);
 
-	if (!of_property_read_u8(np, "qcom,tune-usb2-disc-thres", &override))
-		init_tbl[F_TUNE_HSDISC] = override;
-
-	if (!of_property_read_u8(np, "qcom,tune-usb2-preem", &override))
-		init_tbl[F_TUNE_USB2_PREEM] = override;
-
-	for (i = 0; i < F_NUM_TUNE_FIELDS; i++)
-		regmap_field_update_bits(rptr->regs[i], init_tbl[i], init_tbl[i]);
-
-	ret = regmap_field_read_poll_timeout(rptr->regs[F_RPTR_STATUS],
-					     val, val & RPTR_OK, 10, 5);
+	ret = regmap_read_poll_timeout(regmap, base + EUSB2_RPTR_STATUS, val, val & RPTR_OK, 10, 5);
 	if (ret)
 		dev_err(rptr->dev, "initialization timed-out\n");
 
@@ -191,6 +159,8 @@ static int eusb2_repeater_set_mode(struct phy *phy,
 				   enum phy_mode mode, int submode)
 {
 	struct eusb2_repeater *rptr = phy_get_drvdata(phy);
+	struct regmap *regmap = rptr->regmap;
+	u32 base = rptr->base;
 
 	switch (mode) {
 	case PHY_MODE_USB_HOST:
@@ -199,10 +169,8 @@ static int eusb2_repeater_set_mode(struct phy *phy,
 		 * per eUSB 1.2 Spec. Below implement software workaround until
 		 * PHY and controller is fixing seen observation.
 		 */
-		regmap_field_update_bits(rptr->regs[F_FORCE_EN_5],
-					 F_CLK_19P2M_EN, F_CLK_19P2M_EN);
-		regmap_field_update_bits(rptr->regs[F_FORCE_VAL_5],
-					 V_CLK_19P2M_EN, V_CLK_19P2M_EN);
+		regmap_write(regmap, base + EUSB2_FORCE_EN_5, F_CLK_19P2M_EN);
+		regmap_write(regmap, base + EUSB2_FORCE_VAL_5, V_CLK_19P2M_EN);
 		break;
 	case PHY_MODE_USB_DEVICE:
 		/*
@@ -211,10 +179,8 @@ static int eusb2_repeater_set_mode(struct phy *phy,
 		 * repeater doesn't clear previous value due to shared
 		 * regulators (say host <-> device mode switch).
 		 */
-		regmap_field_update_bits(rptr->regs[F_FORCE_EN_5],
-					 F_CLK_19P2M_EN, 0);
-		regmap_field_update_bits(rptr->regs[F_FORCE_VAL_5],
-					 V_CLK_19P2M_EN, 0);
+		regmap_write(regmap, base + EUSB2_FORCE_EN_5, 0);
+		regmap_write(regmap, base + EUSB2_FORCE_VAL_5, 0);
 		break;
 	default:
 		return -EINVAL;
@@ -243,9 +209,8 @@ static int eusb2_repeater_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
 	struct device_node *np = dev->of_node;
-	struct regmap *regmap;
-	int i, ret;
 	u32 res;
+	int ret;
 
 	rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL);
 	if (!rptr)
@@ -258,22 +223,15 @@ static int eusb2_repeater_probe(struct platform_device *pdev)
 	if (!rptr->cfg)
 		return -EINVAL;
 
-	regmap = dev_get_regmap(dev->parent, NULL);
-	if (!regmap)
+	rptr->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!rptr->regmap)
 		return -ENODEV;
 
 	ret = of_property_read_u32(np, "reg", &res);
 	if (ret < 0)
 		return ret;
 
-	for (i = 0; i < F_NUM_FIELDS; i++)
-		eusb2_repeater_tune_reg_fields[i].reg += res;
-
-	ret = devm_regmap_field_bulk_alloc(dev, regmap, rptr->regs,
-					   eusb2_repeater_tune_reg_fields,
-					   F_NUM_FIELDS);
-	if (ret)
-		return ret;
+	rptr->base = res;
 
 	ret = eusb2_repeater_init_vregs(rptr);
 	if (ret < 0) {

---
base-commit: 01af33cc9894b4489fb68fa35c40e9fe85df63dc
change-id: 20240104-phy-qcom-eusb2-repeater-fixes-c9201113032c

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>