Received-SPF: pass (google.com: domain of linux-kernel+bounces-43050-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Date: Mon, 29 Jan 2024 21:34:20 +0530
From: Manivannan Sadhasivam <mani@kernel.org>
To: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lpieralisi@kernel.org>,
	Krzysztof =?utf-8?Q?Wilczy=C5=84ski?= <kw@linux.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Johan Hovold <johan+linaro@kernel.org>,
	Brian Masney <bmasney@redhat.com>,
	Georgi Djakov <djakov@kernel.org>, linux-arm-msm@vger.kernel.org,
	vireshk@kernel.org, quic_vbadigan@quicinc.com,
	quic_skananth@quicinc.com, quic_nitegupt@quicinc.com,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 5/6] arm64: dts: qcom: sm8450: Add opp table support
 to PCIe
Message-ID: <20240129160420.GA27739@thinkpad>
References: <20240112-opp_support-v6-0-77bbf7d0cc37@quicinc.com>
 <20240112-opp_support-v6-5-77bbf7d0cc37@quicinc.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20240112-opp_support-v6-5-77bbf7d0cc37@quicinc.com>

On Fri, Jan 12, 2024 at 07:52:04PM +0530, Krishna chaitanya chundru wrote:
> PCIe needs to choose the appropriate performance state of RPMH power
> domain and interconnect bandwidth based up on the PCIe gen speed.
> 
> Add the OPP table support to specify RPMH performance states and
> interconnect peak bandwidth.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 74 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 6b1d2e0d9d14..eab85ecaeff0 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -1827,7 +1827,32 @@ pcie0: pcie@1c00000 {
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&pcie0_default_state>;
>  
> +			operating-points-v2 = <&pcie0_opp_table>;
> +
>  			status = "disabled";
> +
> +			pcie0_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-2500000 {
> +					opp-hz = /bits/ 64 <2500000>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
> +					opp-peak-kBps = <250000 250000>;

This is a question for Viresh: We already have macros in the driver to derive
the bandwidth based on link speed. So if OPP core exposes a callback to allow
the consumers to set the bw on its own, we can get rid of this entry.

Similar to config_clks()/config_regulators(). Is that feasible?

- Mani

-- 
மணிவண்ணன் சதாசிவம்