Received-SPF: pass (google.com: domain of linux-kernel+bounces-43090-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>, <tiwai@suse.com>
CC: <alsa-devel@alsa-project.org>, <linux-sound@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>,
        "Richard
 Fitzgerald" <rf@opensource.cirrus.com>
Subject: [PATCH 09/18] ALSA: hda: cs35l56: Initialize all ASP1 registers
Date: Mon, 29 Jan 2024 16:27:28 +0000
Message-ID: <20240129162737.497-10-rf@opensource.cirrus.com>
In-Reply-To: <20240129162737.497-1-rf@opensource.cirrus.com>
References: <20240129162737.497-1-rf@opensource.cirrus.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

Add ASP1_FRAME_CONTROL1, ASP1_FRAME_CONTROL5 and the ASP1_TX?_INPUT
registers to the sequence used to initialize the ASP configuration.
Write this sequence to the cache and directly to the registers to
ensure that they match.

A system-specific firmware can patch these registers to values that are
not the silicon default, so that the CS35L56 boots already in the
configuration used by Windows or by "driverless" Windows setups such
as factory tuning.

These may not match how Linux is configuring the HDA codec. And anyway
on Linux the ALSA controls are used to configure routing options.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
---
 sound/pci/hda/cs35l56_hda.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c
index b61e1de8c4bf..f22bcb104a4e 100644
--- a/sound/pci/hda/cs35l56_hda.c
+++ b/sound/pci/hda/cs35l56_hda.c
@@ -30,14 +30,23 @@
   *  ASP1_RX_WL = 24 bits per sample
   *  ASP1_TX_WL = 24 bits per sample
   *  ASP1_RXn_EN 1..3 and ASP1_TXn_EN 1..4 disabled
+  *
+  * Override any Windows-specific mixer settings applied by the firmware.
   */
 static const struct reg_sequence cs35l56_hda_dai_config[] = {
 	{ CS35L56_ASP1_CONTROL1,	0x00000021 },
 	{ CS35L56_ASP1_CONTROL2,	0x20200200 },
 	{ CS35L56_ASP1_CONTROL3,	0x00000003 },
+	{ CS35L56_ASP1_FRAME_CONTROL1,	0x03020100 },
+	{ CS35L56_ASP1_FRAME_CONTROL5,	0x00020100 },
 	{ CS35L56_ASP1_DATA_CONTROL5,	0x00000018 },
 	{ CS35L56_ASP1_DATA_CONTROL1,	0x00000018 },
 	{ CS35L56_ASP1_ENABLES1,	0x00000000 },
+	{ CS35L56_ASP1TX1_INPUT,	0x00000018 },
+	{ CS35L56_ASP1TX2_INPUT,	0x00000019 },
+	{ CS35L56_ASP1TX3_INPUT,	0x00000020 },
+	{ CS35L56_ASP1TX4_INPUT,	0x00000028 },
+
 };
 
 static void cs35l56_hda_play(struct cs35l56_hda *cs35l56)
@@ -133,6 +142,10 @@ static int cs35l56_hda_runtime_resume(struct device *dev)
 		}
 	}
 
+	ret = cs35l56_force_sync_asp1_registers_from_cache(&cs35l56->base);
+	if (ret)
+		goto err;
+
 	return 0;
 
 err:
@@ -976,6 +989,9 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int id)
 
 	regmap_multi_reg_write(cs35l56->base.regmap, cs35l56_hda_dai_config,
 			       ARRAY_SIZE(cs35l56_hda_dai_config));
+	ret = cs35l56_force_sync_asp1_registers_from_cache(&cs35l56->base);
+	if (ret)
+		goto err;
 
 	/*
 	 * By default only enable one ASP1TXn, where n=amplifier index,
-- 
2.39.2