Received-SPF: pass (google.com: domain of linux-kernel+bounces-45264-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Anton Bambura <jenneron@postmarketos.org>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/5] arm64: dts: qcom: sc8180x-lenovo-flex-5g: enable touchscreen
Date: Tue, 30 Jan 2024 22:27:53 +0200
Message-ID: <20240130202755.2289952-4-jenneron@postmarketos.org>
In-Reply-To: <20240130202755.2289952-1-jenneron@postmarketos.org>
References: <20240130202755.2289952-1-jenneron@postmarketos.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Set regulators, reset gpio and delays according to ACPI tables.

Signed-off-by: Anton Bambura <jenneron@postmarketos.org>
---
 .../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts  | 32 +++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index af61acf58d68..8e8e1fca11c0 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -271,6 +271,12 @@ vreg_l3c_1p2: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l4c_3p3: ldo4 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l10c_3p3: ldo10 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3312000>;
@@ -337,6 +343,12 @@ vreg_l10e_2p9: ldo10 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l12e_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l16e_3p0: ldo16 {
 			regulator-min-microvolt = <3072000>;
 			regulator-max-microvolt = <3072000>;
@@ -357,7 +369,7 @@ zap-shader {
 &i2c1 {
 	clock-frequency = <100000>;
 
-	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>, <&ts_reset>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -365,9 +377,17 @@ &i2c1 {
 	touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
+
 		hid-descr-addr = <0x1>;
+		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&vreg_l4c_3p3>;
+		vddl-supply = <&vreg_l12e_1p8>;
 
-		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+		post-power-on-delay-ms = <3>;
+		post-reset-deassert-delay-ms = <200>;
+
+		interrupts-extended = <&tlmm 122 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
 
@@ -718,6 +738,14 @@ wake-n-pins {
 		};
 	};
 
+	ts_reset: ts-reset-state {
+		pins = "gpio54";
+		function = "gpio";
+
+		bias-disable;
+		drive-strength = <16>;
+	};
+
 	usbprim_sbu_default: usbprim-sbu-state {
 		oe-n-pins {
 			pins = "gpio152";
-- 
2.42.0