Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758621AbXLSPMi (ORCPT ); Wed, 19 Dec 2007 10:12:38 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758356AbXLSPM3 (ORCPT ); Wed, 19 Dec 2007 10:12:29 -0500 Received: from nat-132.atmel.no ([80.232.32.132]:63491 "EHLO relay.atmel.no" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1758353AbXLSPM2 (ORCPT ); Wed, 19 Dec 2007 10:12:28 -0500 From: Haavard Skinnemoen To: Andrew Victor Cc: Remy Bohmer , linux-arm-kernel@lists.arm.linux.org.uk, Russell King , linux-kernel@vger.kernel.org, kernel@avr32linux.org, Haavard Skinnemoen Subject: [PATCH v2 3/6] atmel_serial: Use existing console options only if BRG is running Date: Wed, 19 Dec 2007 16:12:07 +0100 Message-Id: <1198077130-9021-4-git-send-email-hskinnemoen@atmel.com> X-Mailer: git-send-email 1.5.3.4 In-Reply-To: <1198077130-9021-3-git-send-email-hskinnemoen@atmel.com> References: <1198077130-9021-1-git-send-email-hskinnemoen@atmel.com> <1198077130-9021-2-git-send-email-hskinnemoen@atmel.com> <1198077130-9021-3-git-send-email-hskinnemoen@atmel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1598 Lines: 49 If BRGR is zero, the baud rate generator isn't running, so the boot loader can't have initialized the port. Signed-off-by: Haavard Skinnemoen --- drivers/serial/atmel_serial.c | 15 +++++++-------- 1 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 61d71b0..a6b3828 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -842,13 +842,13 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud, { unsigned int mr, quot; -// TODO: CR is a write-only register -// unsigned int cr; -// -// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN); -// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) { -// /* ok, the port was enabled */ -// } + /* + * If the baud rate generator isn't running, the port wasn't + * initialized by the boot loader. + */ + quot = UART_GET_BRGR(port); + if (!quot) + return; mr = UART_GET_MR(port) & ATMEL_US_CHRL; if (mr == ATMEL_US_CHRL_8) @@ -868,7 +868,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud, * lower than one of those, as it would make us fall through * to a much lower baud rate than we really want. */ - quot = UART_GET_BRGR(port); *baud = port->uartclk / (16 * (quot - 1)); } -- 1.5.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/