From: Haavard Skinnemoen <hskinnemoen@atmel.com>
To: Andrew Victor <linux@maxim.org.za>
Cc: Remy Bohmer <linux@bohmer.net>, linux-arm-kernel@lists.arm.linux.org.uk,
       Russell King <linux@arm.linux.org.uk>, linux-kernel@vger.kernel.org,
       kernel@avr32linux.org, Haavard Skinnemoen <hskinnemoen@atmel.com>
Subject: [PATCH v2 0/6] atmel_serial: Cleanups, irq handler splitup & DMA
Date: Wed, 19 Dec 2007 16:12:04 +0100
Message-Id: <1198077130-9021-1-git-send-email-hskinnemoen@atmel.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1574
Lines: 37

The following patchset cleans up the atmel_serial driver a bit,
moves a significant portion of the interrupt handler into a tasklet,
and adds DMA support. This is the result of a combined effort by Chip
Coldwell, Remy Bohmer and me. The patches should apply cleanly onto
Linus' latest git tree.

With DMA, I see transfer rates around 92 kbps when transferring a big
file using ZModem (both directions are roughly the same.)

Note that break and error handling doesn't work too well with DMA
enabled. This is a common problem with all the efforts I've seen
adding DMA support to this driver (including my own). The PDC error
handling also accesses icount without locking. I'm tempted to just
ignore the problem for now and hopefully come up with a solution
later.

Everyone, please give it a try and/or review the code.

Chip Coldwell (1):
      atmel_serial: Add DMA support

Haavard Skinnemoen (3):
      atmel_serial: Use cpu_relax() when busy-waiting
      atmel_serial: Use existing console options only if BRG is running
      atmel_serial: Fix bugs in probe() error path and remove()

Remy Bohmer (2):
      atmel_serial: Clean up the code
      atmel_serial: Split the interrupt handler

 drivers/serial/atmel_serial.c |  938 ++++++++++++++++++++++++++++++++---------
 1 files changed, 738 insertions(+), 200 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/