Received-SPF: pass (google.com: domain of linux-kernel+bounces-47335-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Charles Perry <charles.perry@savoirfairelinux.com>
To: mdf@kernel.org
Cc: avandiver@markem-imaje.com,
	bcody@markem-imaje.com,
	Charles Perry <charles.perry@savoirfairelinux.com>,
	Wu Hao <hao.wu@intel.com>,
	Xu Yilun <yilun.xu@intel.com>,
	Tom Rix <trix@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Michal Simek <michal.simek@amd.com>,
	linux-fpga@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] fpga: xilinx-selectmap: add new driver
Date: Wed, 31 Jan 2024 18:05:30 -0500
Message-ID: <20240131230542.3993409-1-charles.perry@savoirfairelinux.com>
In-Reply-To: <20240129225602.3832449-1-charles.perry@savoirfairelinux.com>
References: <20240129225602.3832449-1-charles.perry@savoirfairelinux.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

Hello,

This patchset adds a new driver for the 7 series FPGA's SelectMAP
interface.

The SelectMAP interface shares a common GPIO protocol with the SPI
interface which is already in the kernel (drivers/fpga/xilinx-spi.c).
The approach proposed in this patchset is to refactor xilinx-spi.c into
xilinx-core.c which would handle the common GPIO protocol. This is then
used to build two drivers, the already existing xilinx-spi.c driver and
a newly added xilinx-selectmap.c driver.

The SelectMAP driver proposed only supports 8 bit mode. This is because
the 16 and 32 bits mode have limitations with regards to compressed
bitstream support as well as introducing endianness considerations.

I'm testing xilinx-selectmap.c on a custom i.MX6 board connected to an
Artix 7 FPGA. Flashing a 913K bitstream takes 0.44 seconds.

v2: From Krzysztof Kozlowski review's:
  * Use more conventional names for gpio DT bindings
  * fix example in DT bindings
  * add mc-peripheral-props.yaml to DT bindings
  * fix various formatting mistakes
  * Remove all occurences of the "slave" word.

Charles Perry (3):
  fpga: xilinx-spi: extract a common driver core
  dt-bindings: fpga: xlnx,fpga-slave-selectmap: add DT schema
  fpga: xilinx-selectmap: add new driver

 .../bindings/fpga/xlnx,fpga-selectmap.yaml    |  83 +++++++
 drivers/fpga/Kconfig                          |  12 +
 drivers/fpga/Makefile                         |   2 +
 drivers/fpga/xilinx-core.c                    | 215 ++++++++++++++++++
 drivers/fpga/xilinx-core.h                    |  28 +++
 drivers/fpga/xilinx-selectmap.c               | 106 +++++++++
 drivers/fpga/xilinx-spi.c                     | 205 ++---------------
 7 files changed, 462 insertions(+), 189 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,fpga-sele=
ctmap.yaml
 create mode 100644 drivers/fpga/xilinx-core.c
 create mode 100644 drivers/fpga/xilinx-core.h
 create mode 100644 drivers/fpga/xilinx-selectmap.c

--
2.43.0