Received-SPF: pass (google.com: domain of linux-kernel+bounces-47721-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Date: Thu, 1 Feb 2024 08:11:37 +0100
From: Dimitri Fedrau <dima.fedrau@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Stefan Eichenberger <eichest@gmail.com>, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org
Subject: Re: [PATCH v5 net-next 08/13] net: phy: marvell-88q2xxx: add support
 for temperature sensor
Message-ID: <20240201071137.GA41347@debian>
References: <20240122212848.3645785-1-dima.fedrau@gmail.com>
 <20240122212848.3645785-9-dima.fedrau@gmail.com>
 <65071184-428b-4850-9e0c-baaa73513c6d@lunn.ch>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <65071184-428b-4850-9e0c-baaa73513c6d@lunn.ch>

Am Wed, Jan 31, 2024 at 04:17:06PM +0100 schrieb Andrew Lunn:
> > +static int mv88q2xxx_hwmon_probe(struct phy_device *phydev)
> > +{
> > +	struct device *dev = &phydev->mdio.dev;
> > +	struct device *hwmon;
> > +	char *hwmon_name;
> > +	int ret;
> > +
> > +	/* Enable temperature sensor interrupt */
> > +	ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS,
> > +			       MDIO_MMD_PCS_MV_TEMP_SENSOR1,
> > +			       MDIO_MMD_PCS_MV_TEMP_SENSOR1_INT_EN);
> 
> You enable an interrupt, but i don't see any changes to the interrupt
> handler to handle any interrupts which are generated?
>
Hi Andrew,

you are right. Have to remove these lines. Besides enabling the interrupt
in MDIO_MMD_PCS_MV_TEMP_SENSOR1, there are two further register writes
necessary to make the interrupt propagate. I didn't want it to propagate.
Anyway it's wrong. I couldn't find a good solution to use the temperature
interrupt. Will have a look into this, and probably figuring out how to
do so. But it won't be part of this patch series.

Dimitri