Received-SPF: pass (google.com: domain of linux-kernel+bounces-48088-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Andy Yan <andyshrk@163.com>
To: heiko@sntech.de
Cc: krzysztof.kozlowski+dt@linaro.org,
	robh+dt@kernel.org,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	Andy Yan <andyshrk@163.com>
Subject: [PATCH v2 3/4] arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB
Date: Thu,  1 Feb 2024 20:11:05 +0800
Message-Id: <20240201121106.1471301-3-andyshrk@163.com>
In-Reply-To: <20240201121106.1471301-1-andyshrk@163.com>
References: <20240201121106.1471301-1-andyshrk@163.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

According to the schematic, USB20 HOST0 and HOST1 each have their own
independent power supply, but these two regulators controlled by a
same GPIO, so give it a more appropriate name.

Fixes: 791c154c3982 ("arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB")
Signed-off-by: Andy Yan <andyshrk@163.com>
---

Changes in v2:
- Add two lable for this regulator

 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
index 1b5681fe0471..9c0f408ef339 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -84,7 +84,7 @@ vcc3v3_lcd: vcc3v3-lcd-regulator {
 		vin-supply = <&vcc3v3_sys>;
 	};
 
-	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+	vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_host";
 		regulator-boot-on;
@@ -200,12 +200,12 @@ &u2phy3 {
 };
 
 &u2phy2_host {
-	phy-supply = <&vcc5v0_usb30_host>;
+	phy-supply = <&vcc5v0_usb_host1>;
 	status = "okay";
 };
 
 &u2phy3_host {
-	phy-supply = <&vcc5v0_usb30_host>;
+	phy-supply = <&vcc5v0_usb_host2>;
 	status = "okay";
 };
 
-- 
2.34.1