Received-SPF: pass (google.com: domain of linux-kernel+bounces-49054-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Date: Fri, 2 Feb 2024 02:16:40 +0100
From: Andrew Lunn <andrew@lunn.ch>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Frank Rowand <frowand.list@gmail.com>,
	Robert Marko <robert.marko@sartura.hr>, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x
 PHY package
Message-ID: <2cd72962-2fca-4436-91e7-e1695525bab5@lunn.ch>
References: <20240201151747.7524-1-ansuelsmth@gmail.com>
 <20240201151747.7524-7-ansuelsmth@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240201151747.7524-7-ansuelsmth@gmail.com>

> +  PHY package can be configured in 3 mode following this table:
> +
> +                First Serdes mode       Second Serdes mode
> +  Option 1      PSGMII for copper       Disabled
> +                ports 0-4
> +  Option 2      PSGMII for copper       1000BASE-X / 100BASE-FX
> +                ports 0-4
> +  Option 3      QSGMII for copper       SGMII for
> +                ports 0-3               copper port 4
> +
> +$ref: ethernet-phy-package.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,qca807x-package
> +
> +  qcom,package-mode:
> +    enum:
> +      - qsgmii
> +      - psgmii

There are three modes listed above, yet only two values here? Please
describe how they related.

> +
> +  qcom,tx-driver-strength:
> +    description: set the TX Amplifier value in mv.
> +      If not defined, 600mw is set by default.

Looking at other bindings, it seems pretty normal to include the units
in the property name: qcom,tx-driver-strength-milliwatts.

   Andrew