Received-SPF: pass (google.com: domain of linux-kernel+bounces-49784-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Message-ID: <156ae282-3052-45bd-be71-8220d04e73d1@kernel.org>
Date: Fri, 2 Feb 2024 13:47:05 +0200
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v3 2/3] arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet
 support
Content-Language: en-US
To: MD Danish Anwar <danishanwar@ti.com>,
 Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>
Cc: Andrew Lunn <andrew@lunn.ch>, Conor Dooley <conor+dt@kernel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
 Rob Herring <robh+dt@kernel.org>, linux-kernel@vger.kernel.org,
 devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
 Tero Kristo <kristo@kernel.org>, srk@ti.com, r-gunasekaran@ti.com
References: <20240122113045.1711818-1-danishanwar@ti.com>
 <20240122113045.1711818-3-danishanwar@ti.com>
From: Roger Quadros <rogerq@kernel.org>
In-Reply-To: <20240122113045.1711818-3-danishanwar@ti.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit


On 22/01/2024 13:30, MD Danish Anwar wrote:
> ICSSG1 provides dual Gigabit Ethernet support with proper FW loaded.
> 
> The ICSSG1 MII0 (RGMII1) has DP83869 PHY attached to it. The ICSSG1 shares
> MII1 (RGMII2) PHY DP83869 with CPSW3g and it's assigned by default to
> CPSW3g. The MDIO access to MII1 (RGMII2) PHY DP83869 is controlled by MDIO
> bus switch and also assigned to CPSW3g. Therefore the ICSSG1 MII1 (RGMII2)
> port is kept disable and ICSSG1 is enabled in single MAC mode by
> default.
> 
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am642-evm.dts | 102 ++++++++++++++++++++++++
>  1 file changed, 102 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index 8c5651d2cf5d..c08b0223be52 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -32,6 +32,8 @@ aliases {
>  		mmc1 = &sdhci1;
>  		ethernet0 = &cpsw_port1;
>  		ethernet1 = &cpsw_port2;
> +		ethernet2 = &icssg1_emac0;
> +		ethernet3 = &icssg1_emac1;

If icssg1_emac1 is disabled by default there is no ethernet3 right?

>  	};
>  
>  	memory@80000000 {
> @@ -229,6 +231,70 @@ transceiver2: can-phy1 {
>  		max-bitrate = <5000000>;
>  		standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>;
>  	};
> +
> +	icssg1_eth: icssg1-eth {
> +		compatible = "ti,am642-icssg-prueth";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&icssg1_rgmii1_pins_default>;
> +
please drop blank line.

> +		sram = <&oc_sram>;
> +		ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
> +		firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf",
> +				"ti-pruss/am64x-sr2-rtu0-prueth-fw.elf",
> +				"ti-pruss/am64x-sr2-txpru0-prueth-fw.elf",
> +				"ti-pruss/am64x-sr2-pru1-prueth-fw.elf",
> +				"ti-pruss/am64x-sr2-rtu1-prueth-fw.elf",
> +				"ti-pruss/am64x-sr2-txpru1-prueth-fw.elf";
> +
> +		ti,pruss-gp-mux-sel = <2>,	/* MII mode */
> +				      <2>,
> +				      <2>,
> +				      <2>,	/* MII mode */
> +				      <2>,
> +				      <2>;
> +

please drop blank line.

> +		ti,mii-g-rt = <&icssg1_mii_g_rt>;
> +		ti,mii-rt = <&icssg1_mii_rt>;
> +		ti,iep = <&icssg1_iep0>,  <&icssg1_iep1>;
> +
please drop blank line.

> +		interrupt-parent = <&icssg1_intc>;
> +		interrupts = <24 0 2>, <25 1 3>;
> +		interrupt-names = "tx_ts0", "tx_ts1";
> +
please drop blank line.

> +		dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */
> +		       <&main_pktdma 0xc201 15>, /* egress slice 0 */
> +		       <&main_pktdma 0xc202 15>, /* egress slice 0 */
> +		       <&main_pktdma 0xc203 15>, /* egress slice 0 */
> +		       <&main_pktdma 0xc204 15>, /* egress slice 1 */
> +		       <&main_pktdma 0xc205 15>, /* egress slice 1 */
> +		       <&main_pktdma 0xc206 15>, /* egress slice 1 */
> +		       <&main_pktdma 0xc207 15>, /* egress slice 1 */
> +		       <&main_pktdma 0x4200 15>, /* ingress slice 0 */
> +		       <&main_pktdma 0x4201 15>; /* ingress slice 1 */
> +		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
> +			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
> +			    "rx0", "rx1";
> +
> +		ethernet-ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			icssg1_emac0: port@0 {
> +				reg = <0>;
> +				phy-handle = <&icssg1_phy1>;
> +				phy-mode = "rgmii-id";
> +				ti,syscon-rgmii-delay = <&main_conf 0x4110>;
> +				/* Filled in by bootloader */
> +				local-mac-address = [00 00 00 00 00 00];
> +			};
> +			icssg1_emac1: port@1 {
> +				reg = <1>;
> +				ti,syscon-rgmii-delay = <&main_conf 0x4114>;
> +				/* Filled in by bootloader */
> +				local-mac-address = [00 00 00 00 00 00];
> +				status = "disabled";
> +			};
> +		};
> +	};
>  };
>  
>  &main_pmx0 {
> @@ -383,6 +449,30 @@ ddr_vtt_pins_default: ddr-vtt-default-pins {
>  			AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
>  		>;
>  	};
> +
> +	icssg1_mdio1_pins_default: icssg1-mdio1-default-pins {
> +		pinctrl-single,pins = <
> +			AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */
> +			AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA6) PRG1_MDIO0_MDIO */
> +		>;
> +	};
> +
> +	icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins{
> +		pinctrl-single,pins = <
> +			AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
> +			AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
> +			AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
> +			AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
> +			AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
> +			AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
> +			AM64X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
> +			AM64X_IOPAD(0x00e8, PIN_INPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
> +			AM64X_IOPAD(0x00ec, PIN_INPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
> +			AM64X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
> +			AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
> +			AM64X_IOPAD(0x00f4, PIN_INPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
> +		>;
> +	};
>  };
>  
>  &main_uart0 {
> @@ -731,3 +821,15 @@ &main_mcan1 {
>  	pinctrl-0 = <&main_mcan1_pins_default>;
>  	phys = <&transceiver2>;
>  };
> +
> +&icssg1_mdio {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&icssg1_mdio1_pins_default>;
> +
> +	icssg1_phy1: ethernet-phy@f {
> +		reg = <0xf>;
> +		tx-internal-delay-ps = <250>;
> +		rx-internal-delay-ps = <2000>;
> +	};
> +};

-- 
cheers,
-roger