Received-SPF: pass (google.com: domain of linux-kernel+bounces-50200-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Date: Fri, 2 Feb 2024 17:04:23 +0000
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>, "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Frank Rowand <frowand.list@gmail.com>,
	Robert Marko <robert.marko@sartura.hr>, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for
 configurable LED
Message-ID: <Zb0glzoHmgN5iHl7@shell.armlinux.org.uk>
References: <20240201151747.7524-1-ansuelsmth@gmail.com>
 <20240201151747.7524-10-ansuelsmth@gmail.com>
 <46085abf-8e82-4fd9-95b8-95cbfde6e5c2@lunn.ch>
 <65bd1af9.df0a0220.c0618.9f8d@mx.google.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <65bd1af9.df0a0220.c0618.9f8d@mx.google.com>
Sender: Russell King (Oracle) <linux@armlinux.org.uk>

On Fri, Feb 02, 2024 at 05:40:21PM +0100, Christian Marangi wrote:
> On Fri, Feb 02, 2024 at 02:43:37AM +0100, Andrew Lunn wrote:
> > > +
> > > +			phydev->drv->led_brightness_set = NULL;
> > > +			phydev->drv->led_blink_set = NULL;
> > > +			phydev->drv->led_hw_is_supported = NULL;
> > > +			phydev->drv->led_hw_control_set = NULL;
> > > +			phydev->drv->led_hw_control_get = NULL;
> > 
> > I don't see how that works. You have multiple PHYs using this
> > driver. Some might have LEDs, some might have GPOs. But if you modify
> > the driver structure like this, you prevent all PHYs from having LEDs,
> > and maybe cause a Opps if a PHY device has already registered its
> > LEDs?
> >
> 
> God you are right! Off-topic but given the effects this may cause, why
> the thing is not const? I assume it wouldn't make sense to add OPS based
> on the detected feature since it would have side effect on other PHYs
> that use the same driver.

Maybe phydev->drv should be const to avoid this kind of thing. It
doesn't look like it would be hard to do, and importantly doesn't
require casting away the const-ness anywhere. PHY drivers themselves
can't be const because the driver model needs to be able to modify
the embedded device_driver struct (e.g. see bus_add_driver().)

 drivers/net/phy/phy.c               | 3 +--
 drivers/net/phy/phy_device.c        | 4 ++--
 drivers/net/phy/xilinx_gmii2rgmii.c | 2 +-
 include/linux/phy.h                 | 2 +-
 4 files changed, 5 insertions(+), 6 deletions(-)

Just build-testing it.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!